[chirp_users] UV5R

[John LaMartina ☀]

I would guess you need the access tones to work properly.
CHIRP should be able to program you radio with no problem.

-----
Sent via iPadX


On Jan 31, 2013, at 7:51 AM, Harvey Iri <kp4gyo at yahoo.com> wrote:

> 
> Hello
> 
> I am having a small issue I tries to program my UV5R with the frequencies of my job and I cannot transmit on them, all it does is receive my co-workers, but no transmit. On my repeaters it works fine. the frequencies in question are in the 161 MHZ and 162 MHZ
> range. I used the Baofeng Software, and did not work. So then I used the Chirp and was able to put it on the radio but again no transmit. Version on my radio is the older version. If there is any other software I can use to unlock those 2 frequencies let me know, if you have any questions for more information  just email me.
> 
> 
> Thanks,
>            Harvey.
>  
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130131/053e5c4b/attachment.html