[chirp_users] Chirp latest daily with Baofeng UV-5R

[John LaMartina]

Matt,
Take a look at http://miklor-uv5r.99k.org/UV5R-ErrorMess.html
It describes what Brett is referring to.
John    K3NXU

-----Original Message-----
From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Brett Bump
Sent: Wednesday, February 20, 2013 2:28 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] Chirp latest daily with Baofeng UV-5R


Hi Matt,

My brother (W0BLB) just dropped off his 2 UV-5R's on Monday with his USB
cable.  My 2 UV-5R's came on Monday and I said I would program all of them
for us.  Yesterday I had the same issue and then found I was not getting
the mini-pin connector completely seated in the UV-5R.  The connector has
to by pushed pretty hard into the UV-5R to get a good connection.

Just my $.02 worth (and hope it's helpful).

Brett N0LQG

On Wed, 20 Feb 2013, Matt Grice wrote:

> 
> Hi all,
> 
> I am using a Baofeng UV-5R with BFB297 firmware and CHIRP daily (today's build).
> 
> I have used Chirp successfully with the Wouxun KG-UVD1P, Baofeng UV-3R and Yaesu FT-857D, however, when I use the USB cable I got
for my Wouxun to try and download the
> img from the UV-5R the radio does not communicate with the software.
> 
> Chirp sends two magic numbers to the rig, but the rig doesn't reply.
> 
> I have tested Chirp with the Wouxun and the UV-3R, and it works fine.
> 
> Many thanks
> 
> Matt M0ZAI
> 
> 
>
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users