[chirp_users] 20130208 Build

[Bill Gabbard]

John,
1--BFB297,
2--All Builds of Chirp prior to 20130208 installed/uploaded fine, this is 1st one that's ever gave me a problem.

73s,
Bill
  ----- Original Message ----- 
  From: John LaMartina 
  To: 'Discussion of CHIRP' 
  Sent: Friday, February 08, 2013 2:58 PM
  Subject: Re: [chirp_users] 20130208 Build


  Bill,

  What is your firmware release.

  This can be found by:

  1- Power off the UV5R

  2- Press and Hold the 3 Key

  3-While holding the 3 Key, Power on the radio

   

  A readout of BFB--- will appear.

   

  John    K3NXU

   

  From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Bill Gabbard
  Sent: Friday, February 08, 2013 2:37 PM
  To: chirp_users at intrepid.danplanet.com
  Subject: [chirp_users] 20130208 Build

   

  1--After installing Build 20130208 on my Baofeng UV-5RA I get an error while Uploading to the radio from Chirp, that Radio did not respond. I checked for good cable connections, Com Port, all to no avail.  Uploading previous Builds were no problem, this is 1st problem I've experienced.

  2--Also, when a new Build is issued, an *.asc attachment is included.  What is it and I'm unable to open it.  What program can open it?

  3--How are Bugs reported, I'm newbie to this list so please excuse me.

   

  Thanks,

  Bill



------------------------------------------------------------------------------


  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130208/38fdc59b/attachment.html