[chirp_users] New Daily Build
Leo Ryan
Sun Feb 3 14:39:13 PST 2013
No problem Jim, I bought these radios for emergency purposes, and I want
to load the Marine, and GMRS channels as well as repeaters for my area.
I think I can get that done now. I don't have them all loaded yet, I am
not used to the interface, but I think I can figure it out. Problem Is,
I don't have the right channels with the correct numbers. I will
eventually figure it out.
Thanks, Leo
On 2/3/2013 3:35 PM, Jim Unroe wrote:
> Leo,
> Without going into a lot of detail, there are apparently two flavors
> of UV-5R radios with BFB297 firmware floating around. The difference
> in one caused a problem with uploading. So in the beginning CHIRP
> wouldn't work with both radios.
>
> The important thing was that someone took the time to file a bug
> report (Bug #463). Eventually, after a few exchanges, additional
> information and files were supplied that made it possible to track
> down the cause of the problem.
>
> A workaround for the issue was developed, and after some testing, an
> update was released.
>
> Thanks for reporting that the update worked for you.
> Jim
>
>
> On Sun, Feb 3, 2013 at 3:20 AM, Leo Ryan <lryan at satx.rr.com
> <mailto:lryan at satx.rr.com>> wrote:
>
> I don't know why it didn't work with both of my radios in the
> begining, but it works now.
> Thanks, Leo
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130203/23d2d870/attachment.html
More information about the chirp_users
mailing list