[chirp_users] UV5R

[John LaMartina ☀]

Ken,
This link might assist
http://www.miklor.com/uv5r/UV5R-CTCSS.html 
John K3NXU 

Uv5r Tech Assistance can be found at
Http://www.miklor.com/uv5r 
-----
Sent via iPadX


On Jan 31, 2013, at 10:22 PM, "Ken G" <kdubya at iinet.net.au> wrote:

> I have the same problem. We need the access tone they’ve set to open the squelch. I can’t find any one where I work (I volunteer at a museum) who knows what the tone is.
>  
> 
> Ken G
> 
>  
>  
>  
>  
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Harvey Iri
> Sent: Thursday, 31 January 2013 10:52 PM
> To: chirp_users at intrepid.danplanet.com
> Subject: [chirp_users] UV5R
>  
> Hello
>  
> I am having a small issue I tries to program my UV5R with the frequencies of my job and I cannot transmit on them, all it does is receive my co-workers, but no transmit. On my repeaters it works fine. the frequencies in question are in the 161 MHZ and 162 MHZ
> range. I used the Baofeng Software, and did not work. So then I used the Chirp and was able to put it on the radio but again no transmit. Version on my radio is the older version. If there is any other software I can use to unlock those 2 frequencies let me know, if you have any questions for more information  just email me.
>  
>  
> Thanks,
>            Harvey.
>  
>  
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130201/09633604/attachment.html