[chirp_users] Baofeng V6

[william coulson]

You have to switch it to English by selecting English on the radio buttons. Then the question marks will disappear eh?

I hope I understand your issues, if not good luck!

Bill
  ----- Original Message ----- 
  From: Mike va3mw 
  To: Discussion of CHIRP 
  Cc: Discussion of CHIRP 
  Sent: Saturday, December 28, 2013 3:52 PM
  Subject: Re: [chirp_users] Baofeng V6


  Jack and I are seeing the same thing. We don't have the right software for the right radio. 


  I know 100% in my case that the computer, ports and cable are functional. 


  Boafeng own software has language localization issues.  The software loads but all the icons are full of question marks. .???


  The failure is that the program tries to talk to the radio and the radio does not respond, so it times out. 


  Sorry for the bandwidth on the chirp reflector, but this was the best collection of these type of users I know. 


  Sadly there is no BF-v6 listed on their download site. 


  Mike va3mw

  On Dec 28, 2013, at 5:25 PM, Amnon Zohar <amnon.zohar at gmail.com> wrote:


    are you sure widows did. not automaticaly upgrade the driver to the newer not compatible version?

    בתאריך 28 בדצמ 2013 21:34, "w4grj" <w4grj at satterfield.org> כתב:

      I am using the Baofeng software, error message cannot connect to radio

      It is not a cable or port issue.

      Jack

      W4GRJ



      From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of John LaMartina
      Sent: Saturday, December 28, 2013 2:29 PM
      To: 'Discussion of CHIRP'
      Subject: Re: [chirp_users] Baofeng V6



      Is the programming of the UV-6 software or a driver/cable issue.

      What error messages are you getting?



      John K3NXU . . . http://www.miklor.com





      From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of w4grj
      Sent: Saturday, December 28, 2013 2:15 PM
      To: 'Discussion of CHIRP'
      Subject: Re: [chirp_users] Baofeng V6



      I have a UV-6, also cannot get it to program with the Baofeng software.

      Has anyone successfully programmed the UV-6?

      Thanks,

      Jack





      From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Michael Walker
      Sent: Friday, December 27, 2013 10:14 PM
      To: Discussion of CHIRP
      Subject: Re: [chirp_users] Baofeng V6



      Yes, it isn't a port issue.  



      Mike



      On Fri, Dec 27, 2013 at 10:11 PM, Amnon Zohar <amnon.zohar at gmail.com> wrote:

      could you comunicate with any other radio?

      בתאריך 28 בדצמ 2013 05:07, "Michael Walker" <va3mw at portcredit.net> כתב:

      Hi All



      I know that this is a little off topic and this radio isn't supported by Chirp, but has anyone actually been able to program one?



      This is a 16 Channel VHF only unit.



      I've tried just about all the software from Baofeng that I can find, but I have not found anything that will talk to the radio.



      I am 'assuming' it is using a Kenwood cable configuration as well.



      Mike va3mw





      _______________________________________________
      chirp_users mailing list
      chirp_users at intrepid.danplanet.com
      http://intrepid.danplanet.com/mailman/listinfo/chirp_users


      _______________________________________________
      chirp_users mailing list
      chirp_users at intrepid.danplanet.com
      http://intrepid.danplanet.com/mailman/listinfo/chirp_users




      _______________________________________________
      chirp_users mailing list
      chirp_users at intrepid.danplanet.com
      http://intrepid.danplanet.com/mailman/listinfo/chirp_users


    _______________________________________________
    chirp_users mailing list
    chirp_users at intrepid.danplanet.com
    http://intrepid.danplanet.com/mailman/listinfo/chirp_users



------------------------------------------------------------------------------


  _______________________________________________
  chirp_users mailing list
  chirp_users at intrepid.danplanet.com
  http://intrepid.danplanet.com/mailman/listinfo/chirp_users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131228/856217c8/attachment.html