[chirp_users] Programming PL into UV-5R

[Jim Unroe]

On Fri, Dec 6, 2013 at 1:20 PM, scott richardson <elmrich120966 at yahoo.com>wrote:

> Your solution worked like a charm. I have one more question. Is
> programming a PL  the same as programming a DPL?
>

Not exactly the same, but similar. PL uses the Tone and ToneSql columns to
set the transmit and receive CTCSS tone selections. DPL uses the DTCS Code
and DTCS Rx Code columns to set the transmit and receive DCS code
selections. They both use the Tone Mode column (and sometimes Cross Mode
column) do determine which of the columns are actually used (just because a
column has a default value in it does not mean that value is being used).
That is why it is a good idea for new CHIRP users to enable "Hide Unused
Fields" as I mentioned earlier.

Jim KC9HI

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20131206/74c01060/attachment.html