[chirp_users] Unsubscribe

Ron McKenzie
Tue Aug 6 19:22:13 PDT 2013


Hi, Rich,

> To subscribe or unsubscribe via the World Wide Web, visit
>          http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>          chirp_users-request at intrepid.danplanet.com
73 de KK4DBR    Ron
Orlando, FL

On 8/6/2013 9:27 PM, Richard Gillin wrote:
> Unsubscribe
>
> Rich Gillin
> AL4S
> Board Member - Anchorage ARC
> 907.884.1404
>
> --- Original Message ---
>
> From: chirp_users-request at intrepid.danplanet.com
> Sent: August 6, 2013 5:11 PM
> To: chirp_users at intrepid.danplanet.com
> Subject: chirp_users Digest, Vol 56, Issue 12
>
> Send chirp_users mailing list submissions to
>          chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>          http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
>          chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
>          chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>     1. Programming Nightmares (M Schontz)
>     2. Re: Programming Nightmares (Daniel Nelson)
>     3. Re: Programming Nightmares (Jim Unroe)
>     4. Re: Programming Nightmares (John LaMartina)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 6 Aug 2013 20:34:13 -0400 (EDT)
> From: M Schontz <k8fu at aol.com>
> Subject: [chirp_users] Programming Nightmares
> To: chirp_users at intrepid.danplanet.com
> Message-ID: <8D0611CF954AE4E-EF8-4E83 at webmail-d153.sysops.aol.com>
> Content-Type: text/plain; charset="us-ascii"
>
>
>   Hi Everyone........I purchased a BF UV-5re+ 3 weeks ago and I don't believe I'm any closer  to getting the CHIRP pgm to run than the day I unboxed the radio. I thought I had downloaded everything I needed from Miklor.......Drivers 2 0 1 2.....For Win XP......The Win 32 bit software.... and the exe pgm..........When I enter the Programs file  I first open CHIRP-Daily-20130802-Win32.zip.....then CHIRP-Daily-20130802-installer.exe........I then have a plank page appear with file..edit..radio in the top line task bar....I click on radio then download from radio...A radio page appears I fill the boxes with Port Com1..Vendor BaoFeng and model UV-5...I then click out of this page into a experimental driver warning page...I agree to that and then enter the cloning process page when that is clicked out of I'm in an error page with a msg of RADIO DID NOT RESPOND...........I find all this programming very disconcerting and confusing.  I wish the instructions were step by step as in pro
>   gramming in the manual mode. But I need to master this programming to be able to download more complex RACES and local EOC and disaster freqs. Jim can you help me again ????
>
> M Schontz
> k8fu at aol.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130806/f95f7095/attachment-0001.html
>
> ------------------------------
>
> Message: 2
> Date: Tue, 6 Aug 2013 17:54:31 -0700
> From: Daniel Nelson <kj6lvs at kj6lvs.com>
> Subject: Re: [chirp_users] Programming Nightmares
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID: <3FC76A2E-3383-4D8F-B4C6-D4AC888EF240 at kj6lvs.com>
> Content-Type: text/plain; charset="windows-1252"
>
> On Aug 6, 2013, at 5:34 PM, M Schontz <k8fu at aol.com> wrote:
>
>> Hi Everyone........I purchased a BF UV-5re+ 3 weeks ago and I don't believe I'm any closer  to getting the CHIRP pgm to run than the day I unboxed the radio. I thought I had downloaded everything I needed from Miklor.......Drivers 2 0 1 2.....For Win XP......The Win 32 bit software.... and the exe pgm..........When I enter the Programs file  I first open CHIRP-Daily-20130802-Win32.zip.....then CHIRP-Daily-20130802-installer.exe........I then have a plank page appear with file..edit..radio in the top line task bar....I click on radio then download from radio...A radio page appears I fill the boxes with Port Com1..Vendor BaoFeng and model UV-5...I then click out of this page into a experimental driver warning page...I agree to that and then enter the cloning process page when that is clicked out of I'm in an error page with a msg of RADIO DID NOT RESPOND...........I find all this programming very disconcerting and confusing.  I wish the instructions were step by step as in pr
>   ogramming in the manual mode. But I need to master this programming to be able to download more complex RACES and local EOC and disaster freqs. Jim can you help me again ????
>> M Schontz
>> k8fu at aol.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
> I use a Mac or Linux machine for programming my radios, so I apologize if the terminology I use is slightly wrong?I'm working from 6+ year-old memories of those dark days of Windows. With that said, here are some suggestions:
>
>
> 1) Make sure COM1 is really the port that your USB->Serial adapter (or programing cable) is using. I recall USB adapters usually using higher COM ports. You can check by going into the Device Manager (right-click on "My Computer" and choose "Manage". Find the adapter from the list and look around on its Properties page to find the COM port.
>
> 2) Remember that the Prolific-based USB->serial adapters are assigned a different COM port if you plug them into a different USB port on your computer, so either always use the same port or always check what the COM port is. Annoying!
>
> 3) Try with the Baofeng software. If you can get that to work, you know that the serial connection is working, and you have won the hardest battle. Getting CHIRP working once your serial port is set up right is usually easy.
>
> --
> Daniel Nelson
> KJ6LVS
> http://kj6lvs.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130806/72060fc4/attachment-0001.html
>
> ------------------------------
>
> Message: 3
> Date: Tue, 6 Aug 2013 20:55:28 -0400
> From: Jim Unroe <rock.unroe at gmail.com>
> Subject: Re: [chirp_users] Programming Nightmares
> To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
> Message-ID:
>          <CADnO8U61y_2UyPAkZFsPokfVmjSBPEv+w7uSRyPhA+7grDdbPA at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> On Tue, Aug 6, 2013 at 8:34 PM, M Schontz <k8fu at aol.com> wrote:
>
>>   Hi Everyone........I purchased a BF UV-5re+ 3 weeks ago and I don't
>> believe I'm any closer  to getting the CHIRP pgm to run than the day I
>> unboxed the radio. I thought I had downloaded everything I needed from
>> Miklor.......Drivers 2 0 1 2.....For Win XP......The Win 32 bit
>> software.... and the exe pgm..........When I enter the Programs file  I
>> first open CHIRP-Daily-20130802-Win32.zip.....then
>> CHIRP-Daily-20130802-installer.exe........I then have a plank page appear
>> with file..edit..radio in the top line task bar....I click on radio then
>> download from radio...A radio page appears I fill the boxes with Port
>> Com1..Vendor BaoFeng and model UV-5...I then click out of this page into a
>> experimental driver warning page...I agree to that and then enter the
>> cloning process page when that is clicked out of I'm in an error page with
>> a msg of RADIO DID NOT RESPOND...........I find all this programming very
>> disconcerting and confusing.  I wish the instructions were step by step as
>> in programming in the manual mode. But I need to master this programming to
>> be able to download more complex RACES and local EOC and disaster freqs.
>> Jim can you help me again ????
>>   M Schontz
>> k8fu at aol.com
>>
>> The most common cause of the "RADIO DID NOT RESPOND" error is the cable is
> not fully plugged into the radio.
>
> http://www.miklor.com/uv5r/UV5R-ErrorMess.php#error1
>
> http://groups.yahoo.com/group/baofeng_uv5r/message/31968
>
> Jim KC9HI
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130806/c3c2749a/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Tue, 6 Aug 2013 20:58:51 -0400
> From: "John LaMartina" <JohnLa at usa.net>
> Subject: Re: [chirp_users] Programming Nightmares
> To: "'Discussion of CHIRP'" <chirp_users at intrepid.danplanet.com>
> Message-ID: <006201ce9309$48ae3c10$da0ab430$@net>
> Content-Type: text/plain; charset="us-ascii"
>
> M
>
> Using Miklor.com (the error message page) as a reference, is the cable snapped in completely?
>
> http://www.miklor.com/uv5r/UV5R-ErrorMess.php
>
>
>
> John K3NXU
>
> http://www.miklor.com/uv5r
>
>
>
>
>
>
>
>
>
>
>
>
>
> From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of M Schontz
> Sent: Tuesday, August 06, 2013 8:34 PM
> To: chirp_users at intrepid.danplanet.com
> Subject: [chirp_users] Programming Nightmares
>
>
>
> Hi Everyone........I purchased a BF UV-5re+ 3 weeks ago and I don't believe I'm any closer  to getting the CHIRP pgm to run than the
> day I unboxed the radio. I thought I had downloaded everything I needed from Miklor.......Drivers 2 0 1 2.....For Win XP......The
> Win 32 bit software.... and the exe pgm..........When I enter the Programs file  I first open
> CHIRP-Daily-20130802-Win32.zip.....then CHIRP-Daily-20130802-installer.exe........I then have a plank page appear with
> file..edit..radio in the top line task bar....I click on radio then download from radio...A radio page appears I fill the boxes with
> Port Com1..Vendor BaoFeng and model UV-5...I then click out of this page into a experimental driver warning page...I agree to that
> and then enter the cloning process page when that is clicked out of I'm in an error page with a msg of RADIO DID NOT
> RESPOND...........I find all this programming very disconcerting and confusing.  I wish the instructions were step by step as in
> programming in the manual mode. But I need to master this programming to be able to download more complex RACES and local EOC and
> disaster freqs. Jim can you help me again ????
>
> M Schontz
> k8fu at aol.com
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130806/5ae89482/attachment.html
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
> End of chirp_users Digest, Vol 56, Issue 12
> *******************************************
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>





More information about the chirp_users mailing list