[chirp_users] New to Chirp and Using a Mac

[Jim Unroe]

I don't have a Mac but after seeing this question asked before, I believe
you don't have a USB driver installed for your programming cable. If you
have one of the cheap programming cables with a clone/counterfeit Prolific
chip in it, then you need a special driver. I believe that once you have a
correctly installed USB driver installed, there will be a USB selection
along with the Bluetooth selections.

Check the CHIRP Documentation page

http://chirp.danplanet.com/projects/chirp/wiki/Documentation

Especially the MacOS_Tips page

http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20130406/c9025d87/attachment.html