[chirp_users] Please post

[John Coleman]

read the section reagarding the cable it will tell you how to fix that
lproblem
On Sep 13, 2012 11:42 AM, "David Henderson" <dehenderson at mac.com> wrote:
>
>
> Mac OS X 10.8.1 driver to program Wouxun KG-UV3D using Chirp
>
> I am trying to program a Wouxun UV3D HT using Chirp software and my iMac,
running on Mountain Lion (10.8.1). I've found a driver that loads fine on
the iMac and is recognized by Chirp (/dev/cu.usbserial). This is the driver
- md_PL2303_MacOSX10.6_dmg_v1.4.0. The problem is that when I attempt to
download the Wouxun I get an error that a radio is not "responding." I'm
using Wouxun's USB to radio cable.
>
> What am I missing? Is there a secret Wouxun cloning mode? Any help would
be greatly appreciated.
>
> 73,
> David
> KF4VCA
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
read the section about the cable it will tell you how to fix it. it is not
a software issue
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20120913/b6bfb57a/attachment.html