[chirp_users] Version of Baofeng UV-5R not supported by CHIRP?

John LaMartina JohnLa at usa.net
Wed Oct 24 11:55:54 PDT 2012


Mike,

 

CHIRP is compatible with all Firmware versions of the UV-5R.

 

You will needs to run the CHIRP Daily Build  20121013 or later.

Check here for details:

http://www.miklor.com/uv5r/UV5R-CHIRP.html

 

John    K3NXU

http://www.miklor.com/uv5r

 

 

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of The Silver Fox
Sent: Wednesday, October 24, 2012 1:49 PM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] Version of Baofeng UV-5R not supported by CHIRP?

 

I don't think that is true of all radios.  There is nothing in the radio that precludes writing to it on hookup other than the
initial handshake.

 

73,

Alan - W6ARH

 

 

From: chirp_users-bounces at intrepid.danplanet.com [mailto:chirp_users-bounces at intrepid.danplanet.com] On Behalf Of Kc6iih at aol.com
Sent: Wednesday, October 24, 2012 9:56 AM
To: chirp_users at intrepid.danplanet.com
Subject: Re: [chirp_users] Version of Baofeng UV-5R not supported by CHIRP?

 

I think no matter what radio you are programming you always need to download from the radio first.

Jock  KC6IIH

 

In a message dated 10/24/2012 9:19:40 A.M. Pacific Daylight Time, ghalejr at gmail.com writes:

I was able to successfully use the latest daily build on both my 251, and 291 versions of UV-5R. What you cannot do, is load one
radio, then go to the other radio, and load it. When you go to the other version, you need to download from the radio, the open the
file with all your saved info, and upload it to the new radio. In other words, download from the radio, even if you do not intend to
use the file, that seems to be what tells chirp what version radio you have. 

George

On Wed, Oct 24, 2012 at 7:08 AM, Steve Kompier <skompier at gmail.com> wrote:

Chirp will not work with BFB291. Go here and get software http://www.miklor.com/uv5r/UV5R-Software.html 

 

On Wed, Oct 24, 2012 at 6:32 AM, Kc6iih <Kc6iih at aol.com> wrote:

I read something about there being diffrent versions which require separate programming software.

I think it was on the Baeofeng USA website.

 

Jock  KC6IIH

 

 

 

 

Sent from my Samsung Galaxy Tab 
  JOCK  KC6IIH


Michael Collinson <training at bigpond.net.au> wrote:

I have had success using both CHIRP and Baofeng software in downloading and uploading from a Baofeng UV-5R,  Version BFB 251 120702
VER-05 which belongs to a mate.

However, my own model UV-5R, Version BFB 291 120828N B5R0001 does not respond. Any suggestions?

Regards,

 

Mike

 

_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

 


_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users




_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121024/1108485f/attachment-0001.html 


More information about the chirp_users mailing list