[chirp_users] Chirp - Yaesu FT-897D

[Marco IZ3GME]

Hi David

> I tried Chirp both for Windows XP and for Linux / Ubuntu.  Since the
> version in the PPA for ham radio in Ubuntu is not the latest, I
> installed from the compressed file on the chrip web downloads page.  I
> also downloaded and installed the Windows exe and installed it on the
> same laptop - dual booting into Windows XP or Ubuntu Precise.

The latest daily has many improvements on 857/897 driver, please go on 
using it :)

> Both versions don't list the Yaesu FT-897 so I used the Yaesu FT-857 US
> Version instead.

In the latest version they are listed as FT-859/897 this is one of the 
improvents ;)


> I tried the Linux version - no luck downloading - I got the error was
> expecting 4 something and received 0 error message.  I noticed I could
> set to ;/dev/ttyUSB0 or USB1 but I could NOT set the baud rate which is
> 38,400.

You missed this 
http://chirp.danplanet.com/projects/chirp/wiki/Beginners_Guide there is 
a specific note for yaesu like 897.
During clone the serial speed is fixed, no matter what you set in radio 
menus.
I don't know which of the two ttyUSB is the right one, try both

73 de IZ3GME Marco