[chirp_users] 857D problem

[Marco IZ3GME]

Can you please program your ft757, read the memory back to chirp and 
then send me this image file?
I will investigate on it in a day or two

73 de IZ3GME Marco

On 03/25/2012 03:56 PM, Joseph Skoler wrote:
>
> Further investigation revealed that the CTCSS tone in the chirp program
> is set correctly, but when I upload the memories to the rig, the rig has
> the PL tone set to "VHF-"
>
> What does that mean and how do I correct it?
>
> ------------------------------------------------------------------------
> *From:* Joseph Skoler <jrskoler at yahoo.com>
> *To:* "chirp_users at intrepid.danplanet.com"
> <chirp_users at intrepid.danplanet.com>
> *Sent:* Sunday, March 25, 2012 9:51 AM
> *Subject:* [chirp_users] 857D problem
>
>
> Hi,
>
> I just installed Chirp to program my new 857D. The interface/cable is
> working fine -- able to download/upload memories to/from the radio.
>
> My problem is that none of the UHF/VHF memories work on the rig if
> they're programmed using Chirp.
>
> That is, they're in memory and I can receive on them just fine. But,
> transmitting does not appear to work -- cannot key up the repeaters.
>
> I have quadruple checked the offset direction/amount as well as the PL.
>
> The 10 meter memory entries work fine.
>
> I have an SWR meter on the HF antenna port and it moves a tiny amount
> when I'm transmitting on a memory channel programmed to a VHF or UHF
> frequency, as if it's putting the signal out the HF port.
>
> When I program the memories manually everything works fine.
>
> What am I doing wrong?
>
> thank you,
>
> Joseph, kc2yu
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> <mailto:chirp_users at intrepid.danplanet.com>
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>
>
>
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users