[chirp_users] can't upload to 2820

Mike Heitmann
Thu Mar 15 04:48:49 PDT 2012


Hi  Brian, 

Try today's daily build and see if it does the same thing:
yum update chirp-daily_daily_031520121.fc16-1
or
yum update chirp-daily_daily_031520121

It just got pushed it to the repository on d-rats.com, and I don't know how long it will take to show up in the repo list, so if it tells you it's not there you can download the file here:
http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/noarch/chirp-daily_03152012-1.fc16.noarch.rpm

Then do a yum local install chirp-daily_03152012-1.fc16.noarch.rpm

I haven't done much testing with my 2820 recently. Please report back and let us know what happens.

73,
Mike, N0SO

On Mar 15, 2012, at 1:38 AM, Brian Mury <ve7ngr at rac.ca> wrote:

> Hello,
> 
> I'm having problems uploading to my 2820 (downloading works). The upload
> progresses until the CHIRP progress bar has hit 100%, and the 2820
> progress bar has *almost* hit 100%, then the window with the CHIRP
> progress bar closes, and the radio just sits there saying "CLONE IN",
> and showing the progress bar a pixel or two away from completion. I'm
> forced to power cycle the radio, at which point it resets to factory
> settings.
> 
> I'm running Fedora 16, and was using chirp-0.1.12-5.fc16 from the
> repository. I've tried upgrading to chirp-0.2.0-1.fc16, also from the
> repository, and am seeing the same problem.
> 
> I'm using the data port, not the speaker port. I dug out an old Windows
> laptop and tried the Icom CS-2820 software - it works, so the radio and
> cable both work.
> 
> This used to work for me. I haven't used CHIRP in quite some time as I
> haven't needed to make any changes to the radio's programming, so
> unfortunately I can't say when it stopped working.
> 
> Here's the relevant portion of the output when run from a terminal:
> 
> ----------------------------------------------------------------
> Clone thread started
> Starting HiSpeed:
> 000: fe fe fe fe fe fe fe fe   ........
> 008: fe fe fe fe fe fe fe fe   ........
> 016: fe fe fe fe ee ef e8 29   .......)
> 024: 70 00 01 00 00 02 01 fd   p.......
> 
> Response:
> 
> Switching to 38400 baud
> Starting HiSpeed Clone:
> 000: fe fe fe fe fe fe fe fe   ........
> 008: fe fe fe fe fe fe ee ef   ........
> 016: e3 29 70 00 00 fd 00 00   .)p.....
> 
> -- Exception: --
> Traceback (most recent call last):
> File "/usr/lib/python2.7/site-packages/chirpui/clone.py", line 219, in
> run
>   self.__radio.sync_out()
> File "/usr/lib/python2.7/site-packages/chirp/icf.py", line 529, in
> sync_out
>   clone_to_radio(self)
> File "/usr/lib/python2.7/site-packages/chirp/icf.py", line 349, in
> clone_to_radio
>   raise errors.RadioError("Did not get clone result from radio")
> RadioError: Did not get clone result from radio
> ------
> Clone failed: Did not get clone result from radio
> Clone thread ended
> ----------------------------------------------------------------
> 
> 73, Brian
> VE7NGR
> 
> 
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20120315/7d263514/attachment.html 


More information about the chirp_users mailing list