[chirp_users] Ref: I need Help

[Bob Nielsen]

You may need to plug in the cable before starting CHIRP, so it picks the correct driver. 

Bob, N7XY

On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <wn6wjn at gmail.com> wrote:

> Thanks Fred
> 
> OK some more information.
> 
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.
> 
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB cable for the UV-5R.
> 
> I have installed the drivers for both above cables and verified the COM Port they are using. Both are COM4.
> 
> I started CHIRP software, plugged in the RT Systems USB cable, held down the Moni key while turning on the FT60-R and the software responded with an error message stating:
> 
> "An Error has occurred. Radio is not responding" with an OK button.
> 
> Now I was told by a friend that the FT60-R has a problem conneting for the 1st time, but it will be easier there after. But then what are the tricks that will make it easier to connect the first time?
> 
> Thanks
> 
> 73
> 
> Wassim
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users



_____
Licensed since 1952