[chirp_users] FT817ND/M601-M605

[Richard Hanna]

I think I may have selected the "International" version of the 817ND, because I was getting a "Error" on the 817 screen at the end of the upload. I started all over...and it worked. As us pilots used to say..."Suffering from Cockpit Turbulence"!  It's working fine now, and got the 60M  M603 reprogrammed fine!

Dick, K3VYY




________________________________
 From: Charles Via <tvia at att.net>
To: Richard Hanna <k3vyy at yahoo.com>; Discussion of CHIRP <chirp_users at intrepid.danplanet.com> 
Sent: Friday, August 17, 2012 9:00 AM
Subject: Re: [chirp_users] FT817ND/M601-M605
 

Dick,

I had the same problem until I realized that there are two possible selections in chirp for the FT-857.  The first one was "FT-857D".  It did not work.  The second was "FT-857D  US" and that one did work.  See if there are the same options for the FT-817 (generic and US model).

Tim  WB4SVL

--- On Fri, 8/17/12, Richard Hanna <k3vyy at yahoo.com> wrote:


>From: Richard Hanna <k3vyy at yahoo.com>
>Subject: [chirp_users] FT817ND/M601-M605
>To: "chirp_users at intrepid.danplanet.com" <chirp_users at intrepid.danplanet.com>
>Date: Friday, August 17, 2012, 8:35 AM
>
>
>When I download the 817ND using CHIRP (latest published download), I am not seeing the M601-605 channels even with "Special Channels" checked. I do see all the VFO's etc. The 817ND is new, bought at Dayton, but just got the data cable, and CHIRP is working fine with my Wouxan UVD1P.
>
>
>Any ideas? or did Yaesu just do a better job of "hiding" the channels?
>
>
>Dick Hanna, K3VYY
>
>-----Inline Attachment Follows-----
>
>
>_______________________________________________
>chirp_users mailing list
>chirp_users at intrepid.danplanet.com
>http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20120817/3e9738eb/attachment.html