[chirp_users] chirp_users Digest, Vol 40, Issue 30

[Charles Cassidy]

Hi Dan,

My apologies for the lack of detail.

1.  Windows XP
2. Tried "Device Manager" to make sure I had the correct com port 
selected.  A couple of times, it would show "Com 3" for example when it 
really was on Com 4 according to device manager.  Just making sure I 
didn't have a Com Port selection problem.
3.  First, I installed the driver from the Chinese USB cable supplier, 
which says it is a "Prolific"2303 All-In-One"  Then tried Woxun's 
"Windows "USB Driver for XP" with the same result, and finally Woxun's 
"When All Else Fails" driver.
5.  Not sure where to find the debug log.  Excuse my ignorance.

Chuck

Same error message each time.


On 4/28/2012 12:00 PM, chirp_users-request at intrepid.danplanet.com wrote:
> Send chirp_users mailing list submissions to
> 	chirp_users at intrepid.danplanet.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> or, via email, send a message with subject or body 'help' to
> 	chirp_users-request at intrepid.danplanet.com
>
> You can reach the person managing the list at
> 	chirp_users-owner at intrepid.danplanet.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of chirp_users digest..."
>
>
> Today's Topics:
>
>     1. Baofeng UV-5R Com Problem (Charles Cassidy)
>     2. Re: Baofeng UV-5R Com Problem (Dan Smith)
>     3. New Daily Build (Build System)
>     4. Re: New Daily Build (Mike Heitmann)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 27 Apr 2012 15:01:25 -0700
> From: Charles Cassidy<cactusch at earthlink.net>
> Subject: [chirp_users] Baofeng UV-5R Com Problem
> To: chirp_users at intrepid.danplanet.com
> Message-ID:<4F9B1735.90809 at earthlink.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> I have Chirp installed, and a USB-Baofeng cable from China (where
> else?).  In spite of trying several drivers and com ports, I always
> receive a "Radio did not ACK first command" (or similar) from the
> software.  Help, please!  I've looked through the FAQ's, etc. and find
> nothing.
>
> Chuck
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 27 Apr 2012 15:17:08 -0700
> From: Dan Smith<dsmith at danplanet.com>
> Subject: Re: [chirp_users] Baofeng UV-5R Com Problem
> To: Discussion of CHIRP<chirp_users at intrepid.danplanet.com>
> Message-ID:<4F9B1AE4.6080309 at danplanet.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
>> I have Chirp installed, and a USB-Baofeng cable from China (where
>> else?).  In spite of trying several drivers and com ports, I always
>> receive a "Radio did not ACK first command" (or similar) from the
>> software.  Help, please!  I've looked through the FAQ's, etc. and find
>> nothing.
> We'll need more detail about:
>
> 1. Which drivers
> 2. What you mean by "several ... com ports"
> 3. What OS you're on
> 4. What version of chirp you're running
> 5. Your debug log
>
> ...basically everything that is mentioned in the "how to report issues"
> page on the website.
>