[chirp_users] Chirp Data transfer

[Dan Smith]

> That is the way I have been doing it!

So, if you want to try something:

1. Open up HyperTerminal
2. Set to the proper COM port, no flow control, 19200 baud
3. Type something, which should be echo'd to the screen if the cable is
    working as expected (even when not connected to the radio)
4. Then put your radio in clone mode and hit the band key
5. See if you get "AH028" on your screen

If you do, then I'm out of ideas. If you don't then there's something 
wrong with the cable, serial port, radio, etc.

-- 
Dan Smith
www.danplanet.com
KK7DS