[chirp_users] Chirp Data transfer

[Ken Simpson, W8EK]

I MAY be making progress.

I turned off the buffers on the laptop (as outlined below), and 
reinstalled ver 0.1.11 to use with the VX-3 (you will recall I had 
switched to ver 0.1.10 on the laptop, just to try it to see if any 
difference).

I now have something in the debug file!

Here is what it says:


Log initialized
Clone thread started

-- Exception: --
Traceback (most recent call last):
   File "chirpui\clone.pyo", line 217, in run
   File "chirp\yaesu_clone.pyo", line 178, in sync_in
   File "chirp\yaesu_clone.pyo", line 69, in clone_in
   File "chirp\yaesu_clone.pyo", line 44, in chunk_read
   File "serial\serialwin32.pyo", line 195, in read
CloneCancelledException
------
Clone failed:
Clone thread ended



Hopefully that will mean something to you.

At least the log says something more than "log initialized".

Thanks very much for your help.

73,

Ken, W8EK




D. Daniel McGlothin KB3MUN wrote, On 7/4/2011 2:33 PM:
> [mailed direct in case greylist prevents this message from reaching the 
> list.]
> 
>> Any other ideas?
> 
> 
> 
>  > By the way, I am using Win XP with SP3.
> 
> You might try disabling the COM port buffers.  We find this necessary at 
> times to do serial communications with certain machine tools so that any 
> pacing requirements are not upset.
> 
> How to:  Right-click MyComputer and choose Properties then click 
> Hardware tab (Alternately, from Control Panel, double-click System); 
> click Device Manager button.  Expand the Ports(COM&LPT) and double-click 
> the COM port in question.  Choose PortSettings tab; click Advanced 
> button.  After making sure that the expected COM port number is selected 
> on the "Advanced Settings" window, either uncheck the 'Use FIFO 
> buffers'; or leave it checked and experiment with lower values in the 
> Receive & Transmit buffers.
> 
> 
>  > Since I wrote this, I also got an older serial cable (as in 9 pin D
>  > connector and not usb) that I had for a VX-5, and tried it.  Same
>  > result (although it is on Com 1).
> 
> Does either of the cable setups work with the VX-5 and Chirp?  Do you 
> have any other radio that does work with Chirp and the computer(s)?  If 
> so, what are the differences in cabling?
> 
> 73 de Daniel KB3MUN
>