[chirp_devel] vx8dr PMS memory

[serialman]

Ray,

Since I dont have the specs, is there any structure to these fields?  Also, the vx8dr has atleast 50 pairs of pms registers, do you have
the values for the rest of the registers?

Thanks

Chip

On 10/28/2017 03:35 PM, ray c wrote:
> Oh, you're talking about upper/lower PMS band memories. I looked into these and found locations, but each was 32 bytes and I didn't dig into what else was in them. The memory locations to start looking at are:
> 0xaf6a = eai
> 0xaf8a = L1
> 0xafaa = U1
> 0xafca = L2
> 0xafea = U2
> 
> Ray
> 
> On Sat, Oct 28, 2017 at 4:43 PM, ray c <rayslinky at gmail.com <mailto:rayslinky at gmail.com>> wrote:
> 
>     On my VX-8G, this already works. It's covered by:
> 
>     #seekto 0x2C4A;
>     struct {
>        u8 nosubvfo:1,
>           unknown:3,
>     *     pskip:1,*
>           skip:1,
>           used:1,
>           valid:1;
>     } flag[900];
> 
>     Common values are 0x3 (regular), 0x7 (skip), and 0xb (preferential). You can select it in the GUI by setting the skip column of a memory to P.
> 
>     Ray
> 
> 
>     On Sat, Oct 28, 2017 at 3:58 PM, serialman via chirp_devel <chirp_devel at intrepid.danplanet.com <mailto:chirp_devel at intrepid.danplanet.com>> wrote:
> 
>         Hi and good afternoon,
> 
>         First, chirp is a Great program and it works great on Linux
> 
>         I have a VX8dr and the program works great except that the PMS u/l memories are not set.
> 
>         Does anybody have any directions on how to read parse and set these memories.
> 
>         If anybody has this done, I would be willing to test.
> 
> 
>         Thanks
> 
>         Chip
> 
> 
>         _______________________________________________
>         chirp_devel mailing list
>         chirp_devel at intrepid.danplanet.com <mailto:chirp_devel at intrepid.danplanet.com>
>         http://intrepid.danplanet.com/mailman/listinfo/chirp_devel <http://intrepid.danplanet.com/mailman/listinfo/chirp_devel>
>         Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers <http://chirp.danplanet.com/projects/chirp/wiki/Developers>
> 
> 
>