[chirp_devel] vx8dr PMS memory

[ray c]

Oh, you're talking about upper/lower PMS band memories. I looked into these
and found locations, but each was 32 bytes and I didn't dig into what else
was in them. The memory locations to start looking at are:
0xaf6a = eai
0xaf8a = L1
0xafaa = U1
0xafca = L2
0xafea = U2

Ray

On Sat, Oct 28, 2017 at 4:43 PM, ray c <rayslinky at gmail.com> wrote:

> On my VX-8G, this already works. It's covered by:
>
> #seekto 0x2C4A;
> struct {
>   u8 nosubvfo:1,
>      unknown:3,
> *     pskip:1,*
>      skip:1,
>      used:1,
>      valid:1;
> } flag[900];
>
> Common values are 0x3 (regular), 0x7 (skip), and 0xb (preferential). You
> can select it in the GUI by setting the skip column of a memory to P.
>
> Ray
>
>
> On Sat, Oct 28, 2017 at 3:58 PM, serialman via chirp_devel <
> chirp_devel at intrepid.danplanet.com> wrote:
>
>> Hi and good afternoon,
>>
>> First, chirp is a Great program and it works great on Linux
>>
>> I have a VX8dr and the program works great except that the PMS u/l
>> memories are not set.
>>
>> Does anybody have any directions on how to read parse and set these
>> memories.
>>
>> If anybody has this done, I would be willing to test.
>>
>>
>> Thanks
>>
>> Chip
>>
>>
>> _______________________________________________
>> chirp_devel mailing list
>> chirp_devel at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_devel
>> Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20171028/5fbd8a46/attachment-0001.html