[chirp_devel] Failure Communicating with Wouxun KG-UVD1P

[Jim Unroe]

On Mon, Aug 4, 2014 at 11:51 AM, Tyler Tidman <tyler.tidman at draak.ca> wrote:

> Dear Chirp Developers:
>
> Back in 2009, I purchased a few Wouxun KG-UVD1P units (firmware version
> unknown) and they used to work quite well with Chirp "stable" up until
> around 2012 or 2013 or so.  Now, on various versions of Ubuntu and
> Debian machines I have tried, Chirp can no longer communicate with these
> radios either to download new data or to upload anything based on an old
> image file.  I suspected my programming cables--the drivers and/or the
> firmware faeries.
>
> {snipped}

>
> Thank you and 73,
>
>
> Tyler Tidman
> VA3DGN
>

Tyler,

I agree with Jon. There is no indication of communication in the debug.log.
If you left the cable out of the radio you would get the same error. I'd
say double check the connection between the programming cable and the
KG-UVD1P. You might try a little pressure on the plug while you attempt the
download.

Jim KC9HI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_devel/attachments/20140804/4f3745c0/attachment-0001.html