[drats_users] AX25 TNCMode in DRats Repeater

[Marco Di Martino (IW2OHX)]

Hi,

I read that now Drats Repeater supports AX25 UI in TNC Mode.

Just tried but It did not work. I can see same error on
0.3.3b5.

I tried it on D-Rats Communicator and it works very well.

So, I ask.... is there in place those feature or not ?

Follow logs and configs.

(repeater.log)

simplejson was not found. Geocoders relying on JSON parsing will not work.
No option 'state' in section: 'settings'
/opt/d-rats-0.3.3/d_rats/config.py:223: GtkWarning: GtkSpinButton: setting an
adjustment with non-zero page size is deprecated
  wtree = gtk.glade.XML(p, "addport", "D-RATS")
Changed to Serial
Changed to TNC
Changed to Serial
Changed to Network
Repeater id is IW2OHX
Serial: tnc-ax25:/dev/ttyq1:0:WIDE2-2 9600
Software XON/XOFF control initialized
Serial exception on connect: could not open port tnc-ax25:/dev/ttyq1:0:WIDE2-2:
[Errno 2] No such file or directory: 'tnc-ax25:/dev/ttyq1:0:WIDE2-2'
Traceback (most recent call last):
  File "/opt/d-rats/d-rats_repeater", line 737, in button_on
    self.dev_list.get_values())
  File "/opt/d-rats/d-rats_repeater", line 411, in add_outgoing_paths
    path.connect()
  File "/opt/d-rats-0.3.3/d_rats/comm.py", line 297, in connect
    raise DataPathNotConnectedError("Unable to open serial port")
d_rats.comm.DataPathNotConnectedError: Unable to open serial port


(repeater.config)

[tweaks]
allow_gps =

[settings]
gpsport = 9500
acceptnet = True
netport = 9000
devices = [('tnc-ax25:/dev/ttyq1:0:WIDE2-2', '9600'),
('net:ref.d-rats.com:9000', '')]
trust_local = True
state = True
idfreq = 30
id = IW2OHX
require_auth = False

Thanks
Marco

---
Marco Di Martino
Via Attimo, 18 - Bollate (MI)
Mobile: +393285373364
e-mail: iw2ohx at iw2ohx.net
-
Amateur Radio: I W 2 O H X
Homepage Inet: www.iw2ohx.net
Homepage Ampr: iw2ohx.ampr.org
LinuxNode: telnet://iw2ohx.ampr.org/
(X)net: telnet://iw2ohx-2.ampr.org/
Packet Mail : IW2OHX @ IW2OHX.ILOM.ITA.EU
Ampr Mail: iw2ohx at iw2ohx.ampr.org
---