[drats_users] How to remember the RatFlector?

[Gene Coldwell]

Dan, I like the multiple port idea _very_ much.

On Tue, 28 Apr 2009 12:58:15 -0700
Dan Smith <dsmith at danplanet.com> wrote:

> Hi Andy,
> 
> > I've been experimenting with D-Rats and both my IC-92 and the
> > Ratflector.  At the moment I have a problem in that when I do things
> > with D-Rats and the radio, it never seems to transmit so I've been
> > trying to switch between the two devices (radio and Ratflector).
> >
> > Is there any way to either (a) get D-Rats to remember the Ratflector
> > setting in its drop-down for the serial port (in Config -> Radio)
> > like it does for the serial port or (b) have two pre-configured
> > configurations with a way to switch between them?  It would seem to
> > me to be a useful thing for EMCOMM so maybe it's there and I'm not
> > using it properly.
> 
> It is not currently there, and yes, it would be very nice.  The reason
> I've been punting on the easy fix to this is that I have something
> else planned.  I guess I'll go ahead and reveal it here and maybe stir
> up some discussion :)
> 
> The plan is to do away with the single serial port and baudrate
> setting in favor of a list.  The list will not be just a set of
> exclusive configurations, but rather a set of ports or data paths that
> can be activated and deactivated.
> 
> This idea came out of a drill we did locally a few months ago.  We
> realized that there is almost no need to communicate between (for
> example) two fire stations.  Rather, all the peripheral nodes need to
> send messages and data to a central point, the county EOC.  That
> station also needs to get things out to the other nodes, which makes
> the frequency that the EOC is on hotly contended.
> 
> So, the above plan will allow you to have (for example) a 2-meter
> radio connected, a 70cm radio connected, and a ratflector connected.
> 
> One configuration would be that you tell all of your peripheral
> stations that your incoming port is on 440 and if they have to send
> you anything, do it there.  Otherwise, they stay on 2-meters and wait
> for you to send things (or perhaps they have two radios as well).
> This allows the EOC to receive traffic in the background while he's
> processing and sending responses out of his primary radio.
> 
> Another configuration may be that east uses 2-meters and west uses
> 70cm to avoid the switching around.
> 
> The software components deep in the stack won't have a problem with
> this at all, it's just a matter of drawing up the GUI to allow you to
> configure it as such, and then of course, providing a way to allow you
> to select which port a particular piece of traffic, ping, etc goes out
> on.
> 
> This will address your concern by allowing you to configure a
> ratflector path and a radio path and just enable/disable them when you
> switch.  Make sense?
> 
> Any comments (from anyone) on the above?
> 
> > Secondly, anyone else connecting an IC-92 (using the RS-92 cable) and seeing
> > problems getting the radio to Tx?
> 
> No problems here.  Is GPS turned off?  Is Auto Data TX turned on?  See
> here for more on that:
> 
>   http://www.d-rats.com/wiki/FrequentlyAskedQuestions#notx
> 
> Thanks!
> 
> -- 
> Dan Smith
> dsmith#danplanet.com, s/#/@/
> www.danplanet.com
> KK7DS
> _______________________________________________
> drats_users mailing list
> drats_users at lists.danplanet.com
> http://lists.danplanet.com/mailman/listinfo/drats_users


-- 
Gene Coldwell <coldwell at csptexas.com>