<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>Hi Anne - type <br>
</p>
<p> chirpw<br>
</p>
<p>to start chirp, i.e., to see it was installed correctly. <br>
</p>
<p>The drivers may be out dated but updating them is relatively
simple.<br>
</p>
<p>Also, chirp's flatpak version doesn't work for Linux running on
an ARM processor - it only works on Intel x86. <br>
</p>
<p>-- Cinaed</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 5/23/22 16:02, Nigel A. Gunn
G8IFF/W8IFF wrote:<br>
</div>
<blockquote type="cite"
cite="mid:1607629628.528524.1653346973171@email.ionos.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<meta charset="UTF-8">
<div style="font-size: 10pt; font-family: arial, helvetica,
sans-serif;"> Install the flatpak version from <a
href="https://trac.chirp.danplanet.com/chirp_daily/LATEST/"
moz-do-not-send="true" class="moz-txt-link-freetext">https://trac.chirp.danplanet.com/chirp_daily/LATEST/</a>
</div>
<div style="font-size: 10pt; font-family: arial, helvetica,
sans-serif;" class="default-style"> <br>
</div>
<blockquote type="cite">
<div> On 23/05/2022 18:29 Anne Ranch
<a class="moz-txt-link-rfc2396E" href="mailto:anneranch2442@gmail.com"><anneranch2442@gmail.com></a> wrote: </div>
<div> <br>
</div>
<div> <br>
</div>
<div dir="ltr">
<div> Cannot instal CHIRP on Ubuntu <br>
</div>
<div> After this <br>
</div>
<div> sudo apt-add-repository ppa:dansmith/chirp-snapshots <br>
sudo apt-get update <br>
sudo apt-get install sudo apt-add-repository
ppa:dansmith/chirp-snapshots <br>
sudo apt-get update <br>
sudo apt-get install chirp-daily </div>
<div> <br>
</div>
<div> I get "cannot find chirp-daily <br>
</div>
</div>
<br>
<div class="gmail_quote">
<div class="gmail_attr" dir="ltr"> On Sun, May 22, 2022 at
3:01 PM <<a
href="mailto:chirp_users-request@intrepid.danplanet.com"
moz-do-not-send="true" class="moz-txt-link-freetext">chirp_users-request@intrepid.danplanet.com</a>>
wrote: <br>
</div>
<blockquote> Send chirp_users mailing list submissions to <br>
<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit <br>
<a target="_blank"
href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
<br>
or, via email, send a message with subject or body 'help' to
<br>
<a target="_blank"
href="mailto:chirp_users-request@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-request@intrepid.danplanet.com</a>
<br>
<br>
You can reach the person managing the list at <br>
<a target="_blank"
href="mailto:chirp_users-owner@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-owner@intrepid.danplanet.com</a>
<br>
<br>
When replying, please edit your Subject line so it is more
specific <br>
than "Re: Contents of chirp_users digest..." <br>
<br>
<br>
Today's Topics: <br>
<br>
1. BF-F8+ , how to program (Kenneth G. Gordon) <br>
2. Re: BF-F8+ , how to program (Robert Ankenbauer) <br>
3. Re: BF-F8+ , how to program (Ken Hansen) <br>
4. Re: BF-F8+ , how to program (Jim Unroe) <br>
5. FT-60 upload erroor (John Mosticone) <br>
6. Re: BF-F8+ , how to program (Kenneth G. Gordon) <br>
7. Re: BF-F8+ , how to program (Jim Unroe) <br>
8. Re: BF-F8+ , how to program (Kenneth G. Gordon) <br>
9. Re: FT-60 upload erroor (D.J.J. Ring, Jr.) <br>
10. Re: FT-60 upload erroor (John Mosticone) <br>
<br>
<br>
---------------------------------------------------------------------- <br>
<br>
Message: 1 <br>
Date: Sat, 21 May 2022 12:10:51 -0700 <br>
From: "Kenneth G. Gordon" <<a target="_blank"
href="mailto:kgordon2006@frontier.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
<br>
Subject: [chirp_users] BF-F8+ , how to program <br>
To: <a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
Message-ID: <<a target="_blank"
href="mailto:6289393B.1954.1AAF57F9@kgordon2006.frontier.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">6289393B.1954.1AAF57F9@kgordon2006.frontier.com</a>>
<br>
Content-Type: text/plain; charset=US-ASCII <br>
<br>
A friend just bought a new Baofeng BA-F8+ and is having
considerable trouble programming <br>
it. <br>
<br>
Is there a specific version of Chirp which will do the
trick? <br>
<br>
Ken W7EKB <br>
<br>
<br>
------------------------------ <br>
<br>
Message: 2 <br>
Date: Sat, 21 May 2022 15:31:01 -0400 <br>
From: Robert Ankenbauer <<a target="_blank"
href="mailto:bobank03@gmail.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">bobank03@gmail.com</a>>
<br>
Subject: Re: [chirp_users] BF-F8+ , how to program <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <br>
<CAOy-K79GYQM=<a target="_blank"
href="mailto:XfNmKrF41uLtT7%2BRs1A262V8gUu80sjA0q7a0Q@mail.gmail.com"
rel="noopener" moz-do-not-send="true">XfNmKrF41uLtT7+Rs1A262V8gUu80sjA0q7a0Q@mail.gmail.com</a>>
<br>
Content-Type: text/plain; charset="utf-8" <br>
<br>
According to the wiki: <a target="_blank"
href="https://chirp.danplanet.com/projects/chirp/wiki/Home"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">https://chirp.danplanet.com/projects/chirp/wiki/Home</a>
<br>
<br>
Choose the Baofeng UV-5R as the model. <br>
<br>
<br>
73 Bob KA1TTG <br>
<br>
<br>
<br>
<br>
On Sat, May 21, 2022 at 3:13 PM Kenneth G. Gordon <<a
target="_blank" href="mailto:kgordon2006@frontier.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
<br>
wrote: <br>
<br>
> A friend just bought a new Baofeng BA-F8+ and is having
considerable <br>
> trouble programming <br>
> it. <br>
> <br>
> Is there a specific version of Chirp which will do the
trick? <br>
> <br>
> Ken W7EKB <br>
> <br>
-------------- next part -------------- <br>
An HTML attachment was scrubbed... <br>
URL: <a target="_blank"
href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220521/7e6b93ce/attachment-0001.html"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220521/7e6b93ce/attachment-0001.html</a>
<br>
<br>
------------------------------ <br>
<br>
Message: 3 <br>
Date: Sat, 21 May 2022 15:39:40 -0400 <br>
From: Ken Hansen <<a target="_blank"
href="mailto:ken@n2vip.org" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">ken@n2vip.org</a>>
<br>
Subject: Re: [chirp_users] BF-F8+ , how to program <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <<a target="_blank"
href="mailto:4A36250F-F663-4D18-AE93-E135453AEEE8@n2vip.org"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">4A36250F-F663-4D18-AE93-E135453AEEE8@n2vip.org</a>>
<br>
Content-Type: text/plain; charset=utf-8 <br>
<br>
Always use the most current version, support for radios is
never dropped, so there's no reason to run an old version. <br>
<br>
Ken, N2VIP <br>
<br>
> On May 21, 2022, at 15:11, Kenneth G. Gordon <<a
target="_blank" href="mailto:kgordon2006@frontier.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
wrote: <br>
> <br>
> ?A friend just bought a new Baofeng BA-F8+ and is
having considerable trouble programming <br>
> it. <br>
> <br>
> Is there a specific version of Chirp which will do the
trick? <br>
> <br>
> Ken W7EKB <br>
> _______________________________________________ <br>
> chirp_users mailing list <br>
> <a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
> <a target="_blank"
href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
<br>
> This message was sent to Ken Hansen at <a
target="_blank" href="mailto:ken@n2vip.org" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">ken@n2vip.org</a>
<br>
> To unsubscribe, send an email to <a target="_blank"
href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-unsubscribe@intrepid.danplanet.com</a>
<br>
> To report this email as off-topic, please email <a
target="_blank"
href="mailto:chirp_users-owner@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-owner@intrepid.danplanet.com</a>
<br>
<br>
<br>
------------------------------ <br>
<br>
Message: 4 <br>
Date: Sat, 21 May 2022 16:03:38 -0400 <br>
From: Jim Unroe <<a target="_blank"
href="mailto:rock.unroe@gmail.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">rock.unroe@gmail.com</a>>
<br>
Subject: Re: [chirp_users] BF-F8+ , how to program <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <br>
<CADnO8U6KFo9=<a target="_blank"
href="mailto:h9YWYYcRYVFsLZrXC7HoBBM-_qooN5NgWZKgxA@mail.gmail.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">h9YWYYcRYVFsLZrXC7HoBBM-_qooN5NgWZKgxA@mail.gmail.com</a>>
<br>
Content-Type: text/plain; charset="UTF-8" <br>
<br>
On Sat, May 21, 2022 at 3:12 PM Kenneth G. Gordon <br>
<<a target="_blank"
href="mailto:kgordon2006@frontier.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
wrote: <br>
> <br>
> A friend just bought a new Baofeng BA-F8+ and is having
considerable trouble programming <br>
> it. <br>
> <br>
> Is there a specific version of Chirp which will do the
trick? <br>
> <br>
> Ken W7EKB <br>
<br>
Hi Ken, <br>
<br>
Any version since early 2012. Just choose the correct
Vendor: Baofeng <br>
/ Model: UV-5R along with the correct Port. <br>
<br>
Jim KC9HI <br>
<br>
<br>
------------------------------ <br>
<br>
Message: 5 <br>
Date: Sat, 21 May 2022 20:45:21 -0400 <br>
From: John Mosticone <<a target="_blank"
href="mailto:jmosticone@gmail.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">jmosticone@gmail.com</a>>
<br>
Subject: [chirp_users] FT-60 upload erroor <br>
To: <a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
Message-ID: <br>
<<a target="_blank"
href="mailto:CAJZf5gEhw75%2BYSkMccjJxneiGYGrGdSTZ9S30pCNvoEgmKR3gA@mail.gmail.com"
rel="noopener" moz-do-not-send="true">CAJZf5gEhw75+YSkMccjJxneiGYGrGdSTZ9S30pCNvoEgmKR3gA@mail.gmail.com</a>>
<br>
Content-Type: text/plain; charset="utf-8" <br>
<br>
Hello, having an issue programing an FT-60. <br>
I can download from the FT-60 fine but when I try to upload
to the FT-60 I <br>
receive an immediate error that radio did not respond. <br>
I have uninstalled and reinstalled CHIRP but same result. <br>
Any suggestions would be appreciated. <br>
John <br>
K4IIY <br>
<br>
-- <br>
God Bless America <br>
-------------- next part -------------- <br>
An HTML attachment was scrubbed... <br>
URL: <a target="_blank"
href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220521/61ef36a1/attachment-0001.html"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220521/61ef36a1/attachment-0001.html</a>
<br>
<br>
------------------------------ <br>
<br>
Message: 6 <br>
Date: Sat, 21 May 2022 17:48:08 -0700 <br>
From: "Kenneth G. Gordon" <<a target="_blank"
href="mailto:kgordon2006@frontier.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
<br>
Subject: Re: [chirp_users] BF-F8+ , how to program <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <<a target="_blank"
href="mailto:62898848.18252.1BE423AB@kgordon2006.frontier.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">62898848.18252.1BE423AB@kgordon2006.frontier.com</a>>
<br>
Content-Type: text/plain; charset=ISO-8859-1 <br>
<br>
On 21 May 2022 at 15:39, Ken Hansen wrote: <br>
<br>
> Always use the most current version, support for radios
is never <br>
> dropped, so there's no reason to run an old version. <br>
> <br>
> Ken, N2VIP <br>
> <br>
> > On May 21, 2022, at 15:11, Kenneth G. Gordon <<a
target="_blank" href="mailto:kgordon2006@frontier.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
wrote: <br>
> > <br>
> > A friend just bought a new Baofeng BA-F8+ and is
having considerable trouble programming <br>
> > it. <br>
> > <br>
> > Is there a specific version of Chirp which will do
the trick? <br>
> > <br>
> > Ken W7EKB <br>
<br>
I guess I didn't make myself very clear. Sorry about that. <br>
<br>
What I meant was that when programming this BF-F8+, I had
trouble picking out the correct <br>
radio-type to program it. <br>
<br>
I finally tried, from my OWN computer, not his, the choice,
BF-F8HP. <br>
<br>
It took several tries to get the program to "stick", but I
finally succeeded. <br>
<br>
I AM using the latest version of chirp, btw. <br>
<br>
Thanks, <br>
<br>
Ken W7EKB <br>
<br>
<br>
------------------------------ <br>
<br>
Message: 7 <br>
Date: Sat, 21 May 2022 20:57:46 -0400 <br>
From: Jim Unroe <<a target="_blank"
href="mailto:rock.unroe@gmail.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">rock.unroe@gmail.com</a>>
<br>
Subject: Re: [chirp_users] BF-F8+ , how to program <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <br>
<<a target="_blank"
href="mailto:CADnO8U6sbkHnvC6ubYN4eCR-oD27n1y7ja8763Ne3WAwNWCHiA@mail.gmail.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">CADnO8U6sbkHnvC6ubYN4eCR-oD27n1y7ja8763Ne3WAwNWCHiA@mail.gmail.com</a>>
<br>
Content-Type: text/plain; charset="UTF-8" <br>
<br>
On Sat, May 21, 2022 at 8:49 PM Kenneth G. Gordon <br>
<<a target="_blank"
href="mailto:kgordon2006@frontier.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
wrote: <br>
> <br>
> On 21 May 2022 at 15:39, Ken Hansen wrote: <br>
> <br>
> > Always use the most current version, support for
radios is never <br>
> > dropped, so there's no reason to run an old
version. <br>
> > <br>
> > Ken, N2VIP <br>
> > <br>
> > > On May 21, 2022, at 15:11, Kenneth G. Gordon
<<a target="_blank"
href="mailto:kgordon2006@frontier.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
wrote: <br>
> > > <br>
> > > A friend just bought a new Baofeng BA-F8+ and
is having considerable trouble programming <br>
> > > it. <br>
> > > <br>
> > > Is there a specific version of Chirp which
will do the trick? <br>
> > > <br>
> > > Ken W7EKB <br>
> <br>
> I guess I didn't make myself very clear. Sorry about
that. <br>
> <br>
> What I meant was that when programming this BF-F8+, I
had trouble picking out the correct <br>
> radio-type to program it. <br>
> <br>
> I finally tried, from my OWN computer, not his, the
choice, BF-F8HP. <br>
> <br>
> It took several tries to get the program to "stick",
but I finally succeeded. <br>
> <br>
> I AM using the latest version of chirp, btw. <br>
> <br>
> Thanks, <br>
> <br>
> Ken W7EKB <br>
<br>
Ken, <br>
<br>
BF-F8HP is the wrong model to choose for a BF-F8+. The
BF-F8+ is a <br>
UV-5R like radio with 2 transmit power levels, therefore you
should <br>
choose the UV-5R model selection to program it. The BF-F8HP
is a UV-5R <br>
like radio with 3 transmit power levels. The BF-F8HP model
selection <br>
should only be for radio models with 3 transmit power
levels. <br>
<br>
Jim KC9HI <br>
<br>
<br>
------------------------------ <br>
<br>
Message: 8 <br>
Date: Sat, 21 May 2022 18:23:10 -0700 <br>
From: "Kenneth G. Gordon" <<a target="_blank"
href="mailto:kgordon2006@frontier.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">kgordon2006@frontier.com</a>>
<br>
Subject: Re: [chirp_users] BF-F8+ , how to program <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <<a target="_blank"
href="mailto:6289907E.19911.1C04389F@kgordon2006.frontier.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">6289907E.19911.1C04389F@kgordon2006.frontier.com</a>>
<br>
Content-Type: text/plain; charset=ISO-8859-1 <br>
<br>
On 21 May 2022 at 15:31, Robert Ankenbauer wrote: <br>
<br>
> <br>
> According to the wiki:? <a target="_blank"
href="https://chirp.danplanet.com/projects/chirp/wiki/Home"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">https://chirp.danplanet.com/projects/chirp/wiki/Home</a>
<br>
> <br>
> Choose the Baofeng UV-5R as the model. <br>
> <br>
> 73 Bob KA1TTG <br>
<br>
Hmmm....that is interesting.... <br>
<br>
I believe I tried that first, and got a "wrong radio type"
error, but I'll give it another try. <br>
<br>
In any case, when I used the BF-F8HP, it eventually worked.
<br>
<br>
<br>
------------------------------ <br>
<br>
Message: 9 <br>
Date: Sun, 22 May 2022 13:47:47 -0400 <br>
From: "D.J.J. Ring, Jr." <<a target="_blank"
href="mailto:n1ea@arrl.net" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">n1ea@arrl.net</a>>
<br>
Subject: Re: [chirp_users] FT-60 upload erroor <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <br>
<<a target="_blank"
href="mailto:CADO5RbjsMGHqSE-xJoW09ZoxWfmGT_OMm8VFAMb7mf2zAQQgTg@mail.gmail.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">CADO5RbjsMGHqSE-xJoW09ZoxWfmGT_OMm8VFAMb7mf2zAQQgTg@mail.gmail.com</a>>
<br>
Content-Type: text/plain; charset="utf-8" <br>
<br>
What operating system are you using? Windows, Mac, Linux? <br>
I had that problem (or similar) with Linux, I used a
friend's laptop to <br>
bypass the problem. <br>
<br>
Can you send the error log? <br>
<br>
73 <br>
DR <br>
<br>
<br>
<br>
On Sat, May 21, 2022, 8:45 PM John Mosticone <<a
target="_blank" href="mailto:jmosticone@gmail.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">jmosticone@gmail.com</a>>
wrote: <br>
<br>
> Hello, having an issue programing an FT-60. <br>
> I can download from the FT-60 fine but when I try to
upload to the FT-60 I <br>
> receive an immediate error that radio did not respond.
<br>
> I have uninstalled and reinstalled CHIRP but same
result. <br>
> Any suggestions would be appreciated. <br>
> John <br>
> K4IIY <br>
> <br>
> -- <br>
> God Bless America <br>
> _______________________________________________ <br>
> chirp_users mailing list <br>
> <a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
> <a target="_blank"
href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
<br>
> This message was sent to D.J.J. Ring, Jr. at <a
target="_blank" href="mailto:n1ea@arrl.net" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">n1ea@arrl.net</a>
<br>
> To unsubscribe, send an email to <br>
> <a target="_blank"
href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-unsubscribe@intrepid.danplanet.com</a>
<br>
> To report this email as off-topic, please email <br>
> <a target="_blank"
href="mailto:chirp_users-owner@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-owner@intrepid.danplanet.com</a>
<br>
-------------- next part -------------- <br>
An HTML attachment was scrubbed... <br>
URL: <a target="_blank"
href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220522/20ced839/attachment-0001.html"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220522/20ced839/attachment-0001.html</a>
<br>
<br>
------------------------------ <br>
<br>
Message: 10 <br>
Date: Sun, 22 May 2022 14:21:55 -0400 <br>
From: John Mosticone <<a target="_blank"
href="mailto:jmosticone@gmail.com" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">jmosticone@gmail.com</a>>
<br>
Subject: Re: [chirp_users] FT-60 upload erroor <br>
To: Discussion of CHIRP <<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>>
<br>
Message-ID: <br>
<<a target="_blank"
href="mailto:CAJZf5gG1iVQEmODAL8sdWcuoxxEC0G4sJ1btmYDuFrv1VGKjmQ@mail.gmail.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">CAJZf5gG1iVQEmODAL8sdWcuoxxEC0G4sJ1btmYDuFrv1VGKjmQ@mail.gmail.com</a>>
<br>
Content-Type: text/plain; charset="utf-8" <br>
<br>
Thanks for the info DR I?m using a windows laptop with all
the latest <br>
updates. I think I?m going to have to try a different cable
If no other fix <br>
is known <br>
John <br>
K4IIY <br>
<br>
On Sun, May 22, 2022 at 1:52 PM D.J.J. Ring, Jr. <<a
target="_blank" href="mailto:n1ea@arrl.net" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">n1ea@arrl.net</a>>
wrote: <br>
<br>
> What operating system are you using? Windows, Mac,
Linux? <br>
> I had that problem (or similar) with Linux, I used a
friend's laptop to <br>
> bypass the problem. <br>
> <br>
> Can you send the error log? <br>
> <br>
> 73 <br>
> DR <br>
> <br>
> <br>
> <br>
> On Sat, May 21, 2022, 8:45 PM John Mosticone <<a
target="_blank" href="mailto:jmosticone@gmail.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">jmosticone@gmail.com</a>>
wrote: <br>
> <br>
>> Hello, having an issue programing an FT-60. <br>
>> I can download from the FT-60 fine but when I try
to upload to the FT-60 <br>
>> I receive an immediate error that radio did not
respond. <br>
>> I have uninstalled and reinstalled CHIRP but same
result. <br>
>> Any suggestions would be appreciated. <br>
>> John <br>
>> K4IIY <br>
>> <br>
>> -- <br>
>> God Bless America <br>
>> _______________________________________________ <br>
>> chirp_users mailing list <br>
>> <a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
>> <a target="_blank"
href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
<br>
>> This message was sent to D.J.J. Ring, Jr. at <a
target="_blank" href="mailto:n1ea@arrl.net" rel="noopener"
moz-do-not-send="true" class="moz-txt-link-freetext">n1ea@arrl.net</a>
<br>
>> To unsubscribe, send an email to <br>
>> <a target="_blank"
href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-unsubscribe@intrepid.danplanet.com</a>
<br>
>> To report this email as off-topic, please email <br>
>> <a target="_blank"
href="mailto:chirp_users-owner@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-owner@intrepid.danplanet.com</a>
<br>
> <br>
> _______________________________________________ <br>
> chirp_users mailing list <br>
> <a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
> <a target="_blank"
href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
<br>
> This message was sent to John M Mosticone at <a
target="_blank" href="mailto:jmosticone@gmail.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">jmosticone@gmail.com</a> <br>
> To unsubscribe, send an email to <br>
> <a target="_blank"
href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-unsubscribe@intrepid.danplanet.com</a>
<br>
> To report this email as off-topic, please email <br>
> <a target="_blank"
href="mailto:chirp_users-owner@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-owner@intrepid.danplanet.com</a>
<br>
<br>
-- <br>
God Bless America <br>
-------------- next part -------------- <br>
An HTML attachment was scrubbed... <br>
URL: <a target="_blank"
href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220522/fb481cfa/attachment-0001.html"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20220522/fb481cfa/attachment-0001.html</a>
<br>
<br>
------------------------------ <br>
<br>
_______________________________________________ <br>
chirp_users mailing list <br>
<a target="_blank"
href="mailto:chirp_users@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users@intrepid.danplanet.com</a>
<br>
<a target="_blank"
href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
<br>
To unsubscribe, send an email to <a target="_blank"
href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com"
rel="noopener" moz-do-not-send="true"
class="moz-txt-link-freetext">chirp_users-unsubscribe@intrepid.danplanet.com</a>
<br>
<br>
End of chirp_users Digest, Vol 161, Issue 8 <br>
******************************************* <br>
</blockquote>
</div>
_______________________________________________ chirp_users
mailing list <a class="moz-txt-link-abbreviated" href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a class="moz-txt-link-freetext" href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a> This
message was sent to Nigel Gunn, W8IFF at <a class="moz-txt-link-abbreviated" href="mailto:nigel@ngunn.net">nigel@ngunn.net</a> To
unsubscribe, send an email to
<a class="moz-txt-link-abbreviated" href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a> To report this
email as off-topic, please email
<a class="moz-txt-link-abbreviated" href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a> </blockquote>
<div class="default-style" style="font-size: 10pt; font-family:
arial,helvetica,sans-serif;"> <br>
</div>
<div class="io-ox-signature">
<p>Nigel A. Gunn, ///shoulders.outwards.resolutions tel
+1-937-971-0366<br>
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail
<a class="moz-txt-link-abbreviated" href="mailto:nigel@ngunn.net">nigel@ngunn.net</a> www <a class="moz-txt-link-freetext" href="http://www.ngunn.net">http://www.ngunn.net</a> <br>
<br>
</p>
</div>
<br>
<fieldset class="moz-mime-attachment-header"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
chirp_users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a class="moz-txt-link-freetext" href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to cinaed smson at <a class="moz-txt-link-abbreviated" href="mailto:cinaed.simson@gmail.com">cinaed.simson@gmail.com</a>
To unsubscribe, send an email to <a class="moz-txt-link-abbreviated" href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
To report this email as off-topic, please email <a class="moz-txt-link-abbreviated" href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a></pre>
</blockquote>
</body>
</html>