<div dir="ltr"><div>if you transceiver is close to your computer I can pick interference from CPU, data bus clocks, video card it can be intermittent depending what graphics are displayed, sometimes bootup screens, or certain video sizes<br></div><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Apr 7, 2021 at 1:14 AM Glenn K0LNY <<a href="mailto:glennervin@cableone.net">glennervin@cableone.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Can you explain the interference?<br>
Does your signal not get out, or are you having trouble receiving?<br>
It could be the antenna, or you might have it set on low power.<br>
Glenn<br>
----- Original Message ----- <br>
From: "zeb doz" <<a href="mailto:zardoz123456@gmail.com" target="_blank">zardoz123456@gmail.com</a>><br>
To: <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
Sent: Tuesday, April 06, 2021 10:40 PM<br>
Subject: [chirp_users] Interference<br>
<br>
<br>
Interference when I use my baofeng 5 be would structures and trees cause <br>
that?<br>
<br>
Sent from my iPhone<br>
<br>
> On Apr 6, 2021, at 2:01 PM, <a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.danplanet.com</a> <br>
> wrote:<br>
><br>
> Send chirp_users mailing list submissions to<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
><br>
> To subscribe or unsubscribe via the World Wide Web, visit<br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> or, via email, send a message with subject or body 'help' to<br>
> <a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.danplanet.com</a><br>
><br>
> You can reach the person managing the list at<br>
> <a href="mailto:chirp_users-owner@intrepid.danplanet.com" target="_blank">chirp_users-owner@intrepid.danplanet.com</a><br>
><br>
> When replying, please edit your Subject line so it is more specific<br>
> than "Re: Contents of chirp_users digest..."<br>
><br>
><br>
> Today's Topics:<br>
><br>
> 1. Help with "Baofeng UV-5R A3" HT (<a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a>)<br>
> 2. Re: Help with "Baofeng UV-5R A3" HT (Nigel A. Gunn G8IFF/W8IFF)<br>
> 3. Re: Help with "Baofeng UV-5R A3" HT (D.J.J. Ring, Jr.)<br>
> 4. Re: Help with "Baofeng UV-5R A3" HT (Glenn K0LNY)<br>
> 5. Re: Debian Chirp Daily (D.J.J. Ring, Jr.)<br>
> 6. Re: Help with "Baofeng UV-5R A3" HT (Jim Unroe)<br>
> 7. Re: Help with "Baofeng UV-5R A3" HT (<a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a>)<br>
> 8. New Daily Build (Build System)<br>
><br>
><br>
> ----------------------------------------------------------------------<br>
><br>
> Message: 1<br>
> Date: Mon, 5 Apr 2021 20:14:45 +0000 (UTC)<br>
> From: <a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a><br>
> Subject: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
> To: "<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>"<br>
> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:1073346771.28903.1617653685954@mail.yahoo.com" target="_blank">1073346771.28903.1617653685954@mail.yahoo.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> My 1st time to post. Be gentle please?I have a new, Baofeng UV5R A3 <br>
> Triband HT, (2m/220/70cm).What software covers this model? I've tried the <br>
> UV-5R software, but it won't let me enter a 220 MHz freq without telling <br>
> me that 220 MHz. is not supported on that version of the <br>
> software.Thanks,Milt.N6MG<br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL: <br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/f108f239/attachment-0001.html" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/f108f239/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 2<br>
> Date: Mon, 5 Apr 2021 16:28:17 -0400 (EDT)<br>
> From: "Nigel A. Gunn G8IFF/W8IFF" <<a href="mailto:nigel@ngunn.net" target="_blank">nigel@ngunn.net</a>><br>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
> To: <a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a>, Milton via chirp_users<br>
> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:604544502.399600.1617654497283@email.ionos.com" target="_blank">604544502.399600.1617654497283@email.ionos.com</a>><br>
> Content-Type: text/plain; charset=UTF-8<br>
><br>
> BTECH UV-5X3 possibly.<br>
><br>
>> On 05/04/2021 16:14 Milton via chirp_users <br>
>> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>> wrote:<br>
>><br>
>><br>
>> My 1st time to post. Be gentle please?<br>
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).<br>
>> What software covers this model? I've tried the UV-5R software, but it <br>
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not <br>
>> supported on that version of the software.<br>
>> Thanks,<br>
>> Milt.<br>
>> N6MG<br>
>> _______________________________________________ chirp_users mailing list <br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a> <br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a> This message <br>
>> was sent to Nigel Gunn, W8IFF at <a href="mailto:nigel@ngunn.net" target="_blank">nigel@ngunn.net</a> To unsubscribe, send an <br>
>> email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
><br>
> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366<br>
> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail <a href="mailto:nigel@ngunn.net" target="_blank">nigel@ngunn.net</a> www <br>
> <a href="http://www.ngunn.net" rel="noreferrer" target="_blank">http://www.ngunn.net</a><br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 3<br>
> Date: Mon, 5 Apr 2021 16:28:07 -0400<br>
> From: "D.J.J. Ring, Jr." <<a href="mailto:n1ea@arrl.net" target="_blank">n1ea@arrl.net</a>><br>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
> To: <a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a>, Discussion of CHIRP<br>
> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<a href="mailto:CADO5RbjdukHBfkEr_XyfHeWEwQY_HduX-2EadyVDBK2TUuvH_w@mail.gmail.com" target="_blank">CADO5RbjdukHBfkEr_XyfHeWEwQY_HduX-2EadyVDBK2TUuvH_w@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> The only tri-band Baofeng that is supported that I can find is UV-RX3.<br>
><br>
> - UV-5RX3 *(use Radioddity UV-5RX3)*<br>
><br>
> Try the Radioddity UV-5RX3 and see if you can download an img file, if so<br>
> save it so you have something to go back to if you need to re-image the<br>
> radio.<br>
><br>
> Best wishes,<br>
><br>
> David (just a user)<br>
><br>
> N1EA<br>
><br>
>> On Mon, Apr 5, 2021 at 4:16 PM Milton via chirp_users <<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>> wrote:<br>
>><br>
>> My 1st time to post. Be gentle please?<br>
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).<br>
>> What software covers this model? I've tried the UV-5R software, but it<br>
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not<br>
>> supported on that version of the software.<br>
>> Thanks,<br>
>> Milt.<br>
>> N6MG<br>
>> _______________________________________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>> This message was sent to D.J.J. Ring, Jr. at <a href="mailto:n1ea@arrl.net" target="_blank">n1ea@arrl.net</a><br>
>> To unsubscribe, send an email to<br>
>> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL: <br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/46b1f433/attachment-0001.html" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/46b1f433/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 4<br>
> Date: Mon, 5 Apr 2021 15:29:55 -0500<br>
> From: "Glenn K0LNY" <<a href="mailto:glennervin@cableone.net" target="_blank">glennervin@cableone.net</a>><br>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
> To: <<a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a>>, "Discussion of CHIRP"<br>
> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <01c501d72a5a$7128ee10$7001a8c0@NUCPPYH><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Hi Milton,<br>
> The same software that this list is all about.<br>
> Chirp.<br>
> Glenn<br>
> ----- Original Message ----- <br>
> From: Milton via chirp_users<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
> Sent: Monday, April 05, 2021 3:14 PM<br>
> Subject: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
><br>
><br>
> My 1st time to post. Be gentle please?<br>
> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).<br>
> What software covers this model? I've tried the UV-5R software, but it <br>
> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not <br>
> supported on that version of the software.<br>
> Thanks,<br>
> Milt.<br>
> N6MG<br>
><br>
><br>
> --------------------------------------------------------------------------------<br>
><br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> This message was sent to Glenn at <a href="mailto:glennervin@cableone.net" target="_blank">glennervin@cableone.net</a><br>
> To unsubscribe, send an email to <br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL: <br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/0e459d28/attachment-0001.html" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/0e459d28/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 5<br>
> Date: Mon, 5 Apr 2021 16:52:55 -0400<br>
> From: "D.J.J. Ring, Jr." <<a href="mailto:n1ea@arrl.net" target="_blank">n1ea@arrl.net</a>><br>
> Subject: Re: [chirp_users] Debian Chirp Daily<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<a href="mailto:CADO5Rbg1OCDWGORWLb1umCodMCbw5ozk_YaE5bgby1OJdoNzCA@mail.gmail.com" target="_blank">CADO5Rbg1OCDWGORWLb1umCodMCbw5ozk_YaE5bgby1OJdoNzCA@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Still working on getting a current version of CHIRP on Debian Stable.<br>
><br>
> Here's the latest.<br>
><br>
> flatpak uninstall chirp<br>
> Found installed ref ?app/com.danplanet.chirp/x86_64/master? (system). Is<br>
> this correct?<br>
> [Y/n]: y<br>
> error: Remote "chirp-origin" not found<br>
><br>
> I have tried to install (or reinstall) chirp using flatpak and I've been<br>
> confused and unfulfilled.<br>
><br>
> I did find this script on this page<br>
> <a href="https://piratesinteepees.org/installing-chirp-in-ubuntu-20-04/" rel="noreferrer" target="_blank">https://piratesinteepees.org/installing-chirp-in-ubuntu-20-04/</a><br>
><br>
> #####<br>
><br>
> #!/bin/bash<br>
> #<br>
> #<br>
> # This script updats chirp flatpak to latest daily build<br>
> # Add this to root's crontab for automatic updates<br>
> # If run as standard user, you will get a popop asking for admin password<br>
> #<br>
> #<br>
> #Make download folder if doesn't exist<br>
> mkdir -p ~/Downloads/ChirpFP<br>
> #Move to Download folder<br>
> cd ~/Downloads/ChirpFP<br>
> #Remove previously downloaded flatpaks<br>
> rm *.flatpak<br>
> #Pull link from download page and download latest flatpak<br>
> wget `lynx -dump <a href="https://trac.chirp.danplanet.com/chirp_daily/LATEST/" rel="noreferrer" target="_blank">https://trac.chirp.danplanet.com/chirp_daily/LATEST/</a> | <br>
> awk<br>
> '/http/{print $2}' | grep flatpak`<br>
> #Install the file<br>
> flatpak install -y --noninteractive *.flatpak<br>
><br>
> #####<br>
><br>
> I tried it, but alas, I still get the cryptic error: Remote "chirp-origin"<br>
> not found<br>
><br>
> I am still confused and lost.<br>
><br>
> Does anyone know how I can uninstall what seems to be a flatpak<br>
> installation on Debian?<br>
><br>
> If I try to update, I receive this error.<br>
><br>
> $ flatpak update<br>
> Looking for updates?<br>
> Unable to update app/com.danplanet.chirp/x86_64/master: Remote<br>
> "chirp-origin" not found<br>
><br>
> Best wishes,<br>
> David N1EA<br>
><br>
><br>
><br>
>> On Wed, Mar 31, 2021 at 7:43 PM D.J.J. Ring, Jr. <<a href="mailto:n1ea@arrl.net" target="_blank">n1ea@arrl.net</a>> wrote:<br>
>><br>
>> AC0HY, I agree with you, I thought the new chirp-daily would overwrite <br>
>> the<br>
>> previous chirp-daily and maybe it would be I have no memory of whether I<br>
>> used a flatpak or used the danplanet repository.<br>
>> ,<br>
>> If anyone would have a suggestion of how I could get rid of it the<br>
>> duplicate chirp, I'd be grateful.<br>
>><br>
>> chirp --version<br>
>><br>
>> CHIRP daily-20201221 on Linux - Debian GNU/Linux 10 (Python 2.7.16)<br>
>><br>
>> $ which chirpw<br>
>> /usr/bin/chirpw<br>
>><br>
>> apt purge chirpw<br>
>> Reading package lists... Done<br>
>> Building dependency tree<br>
>> Reading state information... Done<br>
>> E: Unable to locate package chirps<br>
>><br>
>> # apt purge chirp-daily<br>
>> Reading package lists... Done<br>
>> Building dependency tree<br>
>> Reading state information... Done<br>
>> The following package was automatically installed and is no longer<br>
>> required:<br>
>> python-libxslt1<br>
>> Use 'apt autoremove' to remove it.<br>
>> The following packages will be REMOVED:<br>
>> chirp-daily*<br>
>> 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.<br>
>> After this operation, 4,622 kB disk space will be freed.<br>
>><br>
>> Now I try chirpw and it seems I have a chirpw in a different place that I<br>
>> chmod -x so it could not execute.<br>
>><br>
>> -bash: /usr/local/bin/chirpw: Permission denied<br>
>> root@debian:~# chmod +x /usr/local/bin//chirpw<br>
>> root@debian:~# chirpw<br>
>> WARNING: python-future package is not available;<br>
>> chirp.drivers.anytone778uv requires it<br>
>><br>
>> I forget what I just did but whatever I just did, now chirp runs, but <br>
>> it's<br>
>> the OLD version:<br>
>> CHIRP daily-20201221<br>
>><br>
>> Trying to purge both chirp and chirp-daily fail - apt says it's not<br>
>> installed.<br>
>><br>
>> Ran updatedb as root then, as user:<br>
>> locate chirp > ~/chirpfiles<br>
>> File attached.<br>
>><br>
>> Anyone got a clue how I can get rid of the chirp I have that I can't<br>
>> uninstall using apt?<br>
>> I don't think I installed it from source, but I may have because I<br>
>> couldn't find a deb file to install in Debian, but that would have been<br>
>> before January 2021, and I have aging memory capacities these days. My<br>
>> md5sum memory brain comes out like: "Peas porridge hot, peas<br>
>> porridge cold..." and starts playing Patty Cake. It's part of life, but<br>
>> when you go into the kitchen twice to get a spoon and return twice <br>
>> without<br>
>> it, it's embarrassing. Thankfully my cat hasn't caught on yet.<br>
>><br>
>> Best wishes,<br>
>> David<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>><br>
>>> On Wed, Mar 31, 2021 at 7:20 PM W Paul Mills <<a href="mailto:ac0hy@wpmills.com" target="_blank">ac0hy@wpmills.com</a>> wrote:<br>
>>><br>
>>> That is right, but they conflict. DO NOT INSTALL BOTH. The reason for <br>
>>> the<br>
>>> error you get is because you have attempted to install both. Just <br>
>>> because<br>
>>> they are in package manager (from different repositories) does not mean <br>
>>> you<br>
>>> should install both.<br>
>>><br>
>>> The error is telling you that this is the problem.<br>
>>><br>
>>>> On 3/31/21 5:58 PM, Tony Ling wrote:<br>
>>><br>
>>> They appear both on Synaptic Package Manager on my system.<br>
>>><br>
>>>> On Wed, 31 Mar 2021 at 23:55, W Paul Mills <<a href="mailto:ac0hy@wpmills.com" target="_blank">ac0hy@wpmills.com</a>> wrote:<br>
>>><br>
>>>> The packages chirp & chirp-daily conflict with each other. Uninstall<br>
>>>> chirp, then install chirp-daily.<br>
>>>><br>
>>>> On 3/31/21 4:13 PM, D.J.J. Ring, Jr. wrote:<br>
>>>><br>
>>>> More info!<br>
>>>><br>
>>>> apt install chirp<br>
>>>> Reading package lists... Done<br>
>>>> Building dependency tree<br>
>>>> Reading state information... Done<br>
>>>> The following NEW packages will be installed:<br>
>>>> chirp<br>
>>>> 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.<br>
>>>> Need to get 0 B/474 kB of archives.<br>
>>>> After this operation, 3,830 kB of additional disk space will be used.<br>
>>>> Selecting previously unselected package chirp.<br>
>>>> (Reading database ... 265833 files and directories currently <br>
>>>> installed.)<br>
>>>> Preparing to unpack .../chirp_1%3a20190104-1_amd64.deb ...<br>
>>>> Unpacking chirp (1:20190104-1) ...<br>
>>>> dpkg: error processing archive<br>
>>>> /var/cache/apt/archives/chirp_1%3a20190104-1_amd64.deb (--unpack):<br>
>>>> trying to overwrite '/usr/bin/chirpw', which is also in package<br>
>>>> chirp-daily 20210310~xenial~1<br>
>>>> dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)<br>
>>>> Errors were encountered while processing:<br>
>>>> /var/cache/apt/archives/chirp_1%3a20190104-1_amd64.deb<br>
>>>> E: Sub-process /usr/bin/dpkg returned an error code (1)<br>
>>>><br>
>>>> Any suggestions?<br>
>>>><br>
>>>> 73<br>
>>>> DR<br>
>>>> N1EA<br>
>>>><br>
>>>> On Wed, Mar 31, 2021 at 4:59 PM D.J.J. Ring, Jr. <<a href="mailto:n1ea@arrl.net" target="_blank">n1ea@arrl.net</a>> wrote:<br>
>>>><br>
>>>>> Hello List,<br>
>>>>><br>
>>>>> I'm confused.<br>
>>>>><br>
>>>>> I have added the sources for Chirp daily snapshot to Debian Stable.<br>
>>>>><br>
>>>>> I install chirp.<br>
>>>>><br>
>>>>> I ask chirpw --version and I get:<br>
>>>>> CHIRP daily-20201221 on Linux - Debian GNU/Linux 10 (Python 2.7.16)<br>
>>>>><br>
>>>>> when I try to install again,<br>
>>>>><br>
>>>>> wajig install chirp-daily<br>
>>>>><br>
>>>>> install chirp-daily<br>
>>>>> Reading package lists... Done<br>
>>>>> Building dependency tree<br>
>>>>> Reading state information... Done<br>
>>>>> chirp-daily is already the newest version (20210310~xenial~1).<br>
>>>>><br>
>>>>> How do I get the newest chirp?<br>
>>>>><br>
>>>>> 73<br>
>>>>> David N1EA<br>
>>>>><br>
>>>><br>
>>>> _______________________________________________<br>
>>>> chirp_users mailing <br>
>>>> listchirp_users@intrepid.danplanet.comhttp://<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>>>> This message was sent to Paul AC0HY at <a href="mailto:ac0hy@wpmills.com" target="_blank">ac0hy@wpmills.com</a><br>
>>>> To unsubscribe, send an email to <br>
>>>> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
>>>><br>
>>>><br>
>>>> --<br>
>>>> /**************************************************<br>
>>>> * Amateur Radio Station AC0HY *<br>
>>>> * W. Paul Mills SN807 *<br>
>>>> * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *<br>
>>>> * President Kaw Valley Amateur Radio Club *<br>
>>>> **************************************************/<br>
>>>><br>
>>>> _______________________________________________<br>
>>>> chirp_users mailing list<br>
>>>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
>>>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>>>> This message was sent to Tony Ling at <a href="mailto:tonyg7txu@gmail.com" target="_blank">tonyg7txu@gmail.com</a><br>
>>>> To unsubscribe, send an email to<br>
>>>> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
>>><br>
>>><br>
>>> _______________________________________________<br>
>>> chirp_users mailing <br>
>>> listchirp_users@intrepid.danplanet.comhttp://<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>>> This message was sent to Paul AC0HY at <a href="mailto:ac0hy@wpmills.com" target="_blank">ac0hy@wpmills.com</a><br>
>>> To unsubscribe, send an email to <br>
>>> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
>>><br>
>>><br>
>>> --<br>
>>> /**************************************************<br>
>>> * Amateur Radio Station AC0HY *<br>
>>> * W. Paul Mills SN807 *<br>
>>> * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *<br>
>>> * President Kaw Valley Amateur Radio Club *<br>
>>> **************************************************/<br>
>>><br>
>>> _______________________________________________<br>
>>> chirp_users mailing list<br>
>>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
>>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>>> This message was sent to D.J.J. Ring, Jr. at <a href="mailto:n1ea@arrl.net" target="_blank">n1ea@arrl.net</a><br>
>>> To unsubscribe, send an email to<br>
>>> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
>><br>
>><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL: <br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/23035e5e/attachment-0001.html" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210405/23035e5e/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 6<br>
> Date: Mon, 5 Apr 2021 17:05:43 -0400<br>
> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
> To: <a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a>, Discussion of CHIRP<br>
> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<a href="mailto:CADnO8U51SwR%2BApfVkhaWhxLEFusb8eourh%2BWLgcVxPmufkYK6Q@mail.gmail.com" target="_blank">CADnO8U51SwR+ApfVkhaWhxLEFusb8eourh+WLgcVxPmufkYK6Q@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="UTF-8"<br>
><br>
> The rule of thumb for UV-5R like models with...<br>
> - 2 power levels and 2 bands: Baofeng / UV-5R<br>
> - 3 power levels and 2 bands: Baofeng / BF-F8HP<br>
> - 2 power levels and 3 bands: Radioddity / UV-5RX3<br>
><br>
> Jim KC9HI<br>
><br>
>> On Mon, Apr 5, 2021 at 4:16 PM Milton via chirp_users<br>
>> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>> wrote:<br>
>><br>
>> My 1st time to post. Be gentle please?<br>
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).<br>
>> What software covers this model? I've tried the UV-5R software, but it <br>
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not <br>
>> supported on that version of the software.<br>
>> Thanks,<br>
>> Milt.<br>
>> N6MG<br>
>> _______________________________________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>> This message was sent to Jim at <a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a><br>
>> To unsubscribe, send an email to <br>
>> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 7<br>
> Date: Tue, 6 Apr 2021 04:45:13 +0000 (UTC)<br>
> From: <a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a><br>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
> To: "<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>" <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>>,<br>
> "<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>"<br>
> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:656617797.205723.1617684313667@mail.yahoo.com" target="_blank">656617797.205723.1617684313667@mail.yahoo.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Thanks to everybody that replied.Setting the software to "Radioddity / <br>
> UV-5RX3" did the trick.It now allows me to enter 220 MHz frequencies to <br>
> the software and to write them to the radio.73,Milt.N6MG<br>
><br>
> -----Original Message-----<br>
> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br>
> To: <a href="mailto:n6mg@verizon.net" target="_blank">n6mg@verizon.net</a>; Discussion of CHIRP <br>
> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>><br>
> Sent: Mon, Apr 5, 2021 2:05 pm<br>
> Subject: Re: [chirp_users] Help with "Baofeng UV-5R A3" HT<br>
><br>
> The rule of thumb for UV-5R like models with...<br>
> - 2 power levels and 2 bands: Baofeng / UV-5R<br>
> - 3 power levels and 2 bands: Baofeng / BF-F8HP<br>
> - 2 power levels and 3 bands: Radioddity / UV-5RX3<br>
><br>
> Jim KC9HI<br>
><br>
>> On Mon, Apr 5, 2021 at 4:16 PM Milton via chirp_users<br>
>> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>> wrote:<br>
>><br>
>> My 1st time to post. Be gentle please?<br>
>> I have a new, Baofeng UV5R A3 Triband HT, (2m/220/70cm).<br>
>> What software covers this model? I've tried the UV-5R software, but it <br>
>> won't let me enter a 220 MHz freq without telling me that 220 MHz. is not <br>
>> supported on that version of the software.<br>
>> Thanks,<br>
>> Milt.<br>
>> N6MG<br>
>> _______________________________________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>> This message was sent to Jim at <a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a><br>
>> To unsubscribe, send an email to <br>
>> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL: <br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210406/e254d53e/attachment-0001.html" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210406/e254d53e/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 8<br>
> Date: Tue, 6 Apr 2021 00:10:39 -0700 (PDT)<br>
> From: Build System <<a href="mailto:donotreply@chirp.danplanet.com" target="_blank">donotreply@chirp.danplanet.com</a>><br>
> Subject: [chirp_users] New Daily Build<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
> Message-ID:<br>
> <<a href="mailto:2088156731.39.1617693039600.JavaMail.jenkins@eagle.danplanet.com" target="_blank">2088156731.39.1617693039600.JavaMail.jenkins@eagle.danplanet.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Greetings,<br>
><br>
> A new daily build of CHIRP is available. This includes changes made<br>
> directly to the tree yesterday, and may include additional features,<br>
> bug fixes, and/or bugs. If you are interested in trying it, grab it<br>
> from the following location:<br>
><br>
> <a href="http://trac.chirp.danplanet.com/chirp_daily/daily-20210406" rel="noreferrer" target="_blank">http://trac.chirp.danplanet.com/chirp_daily/daily-20210406</a><br>
><br>
><br>
> A list of the changes included in this build (since the last daily)<br>
> follows:<br>
><br>
> Changes for Build #646<br>
> [Dan Smith <<a href="mailto:dsmith@danplanet.com" target="_blank">dsmith@danplanet.com</a>>] Add a brute force test for model <br>
> detection<br>
><br>
> The regular per-image model detection tests are not very well-suited<br>
> for sussing out issues with one image being detected as multiple<br>
> models, and it can be fooled if the right one is returned first from<br>
> the directory. This adds a new unit test that runs through all the<br>
> images and tries to match_model() every driver in the directory against<br>
> them, asserting that not more than one matches any given file.<br>
><br>
> Also included is a fix to make the unittest adapter use helpfully-<br>
> named test images and makes the existing Detect test report the<br>
> filename of the image it is trying, for easier debug.<br>
><br>
> #0<br>
><br>
> [Dan Smith <<a href="mailto:dsmith@danplanet.com" target="_blank">dsmith@danplanet.com</a>>] Move rt21 match_model() up to the base <br>
> class<br>
><br>
> The RT21 lineage has a match_model that clearly intends to be on the<br>
> base class (as it checks for model==RT21), but is actually present<br>
> only on the last subclass in the file. I'm sure this was an accidental<br>
> detaching after the original implementation. After the driver<br>
> maintenance (related to #8957, #8661 and #8959) the detection test<br>
> started noticing this, probably just due to an ordering change.<br>
><br>
> [Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>>] [RT76] Retevis RT76<br>
><br>
> This patch adds support for the Retevis RT76.<br>
><br>
> Related to #8959<br>
><br>
> [Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>>] [RB26] Retevis RB26<br>
><br>
> This patch adds support for the Retevis RB26.<br>
><br>
> Related to #8661<br>
><br>
> [Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>>] [RB17A] Retevis RB17A<br>
><br>
> This patch adds support for the Retevis RB17A.<br>
><br>
> Related to #8957<br>
><br>
> [Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>>] [RT21] Driver Maintenance: <br>
> retevis_rt21.py<br>
><br>
> This patch is prepare the driver for adding additional radio models.<br>
><br>
> 1: fixes some incorrect code<br>
> 2: reformats some code<br>
> 3: allows CHIRP to make 5 attempts at putting radio into programming mode.<br>
><br>
> Other than for number 3, no features or settings have been added or <br>
> removed from<br>
> this driver.<br>
><br>
> Related to #8957, #8661 and #8959<br>
><br>
> [Rick DeWitt <<a href="mailto:aa0rd@yahoo.com" target="_blank">aa0rd@yahoo.com</a>>] [icomciv] Add IC-7300 Live Mode support, <br>
> Issue #4013<br>
><br>
> [Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>>] [AT-778UV] Add support model variants <br>
> that include VOX<br>
><br>
> This patch adds support for the new model variants that now include VOX:<br>
><br>
> Anytone AT-778UV VOX 3.0<br>
> Retevis RT95 VOX 2.0<br>
><br>
> fixes #8859<br>
><br>
> [Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>>] [AT-778UV] Add anytone778uv.py driver <br>
> to cpep8.manifext<br>
><br>
> This patch adds the anytone778uv.py driver to the cpep8.manifest in order <br>
> to<br>
> enable style checking.<br>
><br>
> related to #8859<br>
><br>
><br>
><br>
> ------------------------------<br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> To unsubscribe, send an email to <br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
><br>
> End of chirp_users Digest, Vol 148, Issue 2<br>
> *******************************************<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
This message was sent to Glenn at <a href="mailto:glennervin@cableone.net" target="_blank">glennervin@cableone.net</a><br>
To unsubscribe, send an email to <br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a> <br>
<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
This message was sent to galen at <a href="mailto:galenthurber@gmail.com" target="_blank">galenthurber@gmail.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a></blockquote></div><br clear="all"><br>-- <br><div dir="ltr" class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Hi I've been on-line since late 1992. I'm a: Skeptic, Secular Humanist, Bright<br>R.I.P. Reject Identity Politics<br>My computer recommendations: <a href="https://mxlinux.org/i" target="_blank">MX Linux</a> operating system, <a href="https://www.pwsafe.org/" target="_blank">Passwordsafe</a>, Pidgin Internet Messenger, tor anonymous browsing bundle.<br>ALERTS: <a href="http://snopes.com" target="_blank">Fact or fiction</a>? <a href="http://quackwatch.com" target="_blank">SCAM</a> Supplements Complimentary Alternative Medicine<br>These companies have unjustly life-banned me: Eastlink, Facebook,Yahoo!, Microsoft<br></div><div>Chat XMPP: <a href="mailto:galen@jabber.at" target="_blank">galen@jabber.at</a><br></div><div dir="ltr"><div></div></div></div></div></div></div></div></div></div>