<span style="word-spacing:1px;border-color:rgb(49,49,49);color:rgb(49,49,49)">I have successfully been able to use Chirp to upload .csv files etc. All communications between the software and radio seem to work. However, when manually loading HAM repeater information, the upload info seems to not take correctly. For example, I used the software to put in a 2m frequency, no tone, “-“ offset at 0.60 and low transmit power. After the upload, the radio shows the correct frequency and memory name but that’s it. The transmit power shows Medium (which isn’t even an option in the software) and also shows both “+” and “-“ on the radio screen. When keying the mike, it shows CT as if there is a tone being transmitted. Something is not syncing right but I am not getting any error messages. Any help here is appreciated. </span>