<div dir="auto"><div>Glen,</div><div dir="auto"><br></div><div dir="auto">With the USB device plugged in, use a terminal and enter this:</div><div dir="auto"><br></div><div dir="auto">lsusb </div><div dir="auto"><br></div><div dir="auto">Carefully check the names of the devices. Is it really /dev/USB1 ?</div><div dir="auto"><br></div><div dir="auto">Remember Unix / Linux is case sensitive, /dev/USB1 is NOT /dev/usb1 which is a normal device name.</div><div dir="auto"><br></div><div dir="auto">Let's assume you made an error and the device is <span style="font-family:sans-serif">ttyUSB1.</span></div><div dir="auto"><span style="font-family:sans-serif"><br></span></div><div dir="auto"><span style="font-family:sans-serif">In terminal:</span></div><div dir="auto">ls -l /dev/ttyUSB1</div><div dir="auto"><br></div><div dir="auto">Pay attention to the group this device belongs, to. The owner will be root.</div><div dir="auto"><br></div><div dir="auto">You need to be in the same group to access it.</div><div dir="auto"><br></div><div dir="auto">Find out what groups your user account is in by the command "groups."</div><div dir="auto"><br></div><div dir="auto">In terminal enter:</div><div dir="auto"><br></div><div dir="auto">groups</div><div dir="auto"><br></div><div dir="auto">Is the group that <span style="font-family:sans-serif">ttyUSB1 belongs to listed as one of your groups? If not you have to add your user to that group using the root account.</span></div><div dir="auto"><span style="font-family:sans-serif"><br></span></div><div dir="auto"><span style="font-family:sans-serif">Best wishes,</span></div><div dir="auto"><span style="font-family:sans-serif"><br></span></div><div dir="auto"><span style="font-family:sans-serif">David</span></div><div dir="auto">N1EA </div><div dir="auto"><br></div><div dir="auto"><br><br><div class="gmail_quote" dir="auto"><div dir="ltr" class="gmail_attr">On Wed, Jun 3, 2020, 00:10 Glenn K0LNY <<a href="mailto:glennervin@cableone.net">glennervin@cableone.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Well, I made a little progress with the USB problem, in Ubuntu.<br>
I installed a new live Ubuntu, on a thumb drive for a friend, and I <br>
installed Chirp for him, and plugged in my Kenwood and tried to download <br>
from radio, and first it did nothing.<br>
So I tried again, and I got the same error:<br>
error no 2 cannot find ttyUSB0<br>
No such file or directory.<br>
And this was on a fresh install of Ubuntu 16.43 with updates installed.<br>
Just like on my other computer that had the same issue.<br>
So in doing a web search on the problem, I found a YouTube where the guy <br>
suggested using lsusb and he found the device in his case, on USB1.<br>
So I went to terminal and found the prolific on USB1<br>
So then I found that in Chirp, it wasn't there before, I am fairly sure.<br>
So now I no longer get that error, but it still does not download from the <br>
radio, it just goes to the blank Chirp screen.<br>
Any ideas?<br>
<br>
Thanks in advance.<br>
Glenn<br>
----- Original Message ----- <br>
From: "Glenn K0LNY" <<a href="mailto:glennervin@cableone.net" target="_blank" rel="noreferrer">glennervin@cableone.net</a>><br>
To: "Discussion of CHIRP" <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
Sent: Friday, May 22, 2020 5:03 PM<br>
Subject: Re: [chirp_users] No USB Port Error<br>
<br>
<br>
Jim,<br>
I just checked to add ubuntu-mate to the dialout and it tells me that<br>
ubuntu-mate is already a member of dialout.<br>
So there is a problem with it finding usb0.<br>
Could it be that a different radio's cable might be using a serial<br>
assignment?<br>
I've used the Tytera cable via USB and Baofeng's cable via USB and it has<br>
always been recognized.<br>
Note, the cable I'm stuck with for now is a USB cable that should go with a<br>
digital radio, the Radioddity GD77-S, so I don't know if it has something<br>
different to the cable.<br>
I accidentally sent the Baofeng cable along with the GD77-S that I traded<br>
for the Kenwood.<br>
Glenn<br>
<br>
----- Original Message ----- <br>
From: "Jim Unroe" <<a href="mailto:rock.unroe@gmail.com" target="_blank" rel="noreferrer">rock.unroe@gmail.com</a>><br>
To: "Discussion of CHIRP" <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
Sent: Friday, May 22, 2020 12:51 PM<br>
Subject: Re: [chirp_users] No USB Port Error<br>
<br>
<br>
On Fri, May 22, 2020 at 1:06 PM Glenn K0LNY <<a href="mailto:glennervin@cableone.net" target="_blank" rel="noreferrer">glennervin@cableone.net</a>> wrote:<br>
><br>
> Hi,<br>
> I just got a new used radio, a Kenwood TH-F6.<br>
> So I plugged in the radio using a non-Kenwood cable and I went into<br>
> "radio" and download from radio and selected my radio model and USB0 and I<br>
> get the message:<br>
> error no 2 cannot open tty/usb0 error cannot locate tty/USB0.<br>
> or something similar.<br>
> I have used this cable and that Ubuntu with Chirp in the past for my other<br>
> radios, and other than different brands of radios, I have always been able<br>
> to do this.<br>
> I know a guy who has done this to this model using the Baofeng cable using<br>
> a different software in Windows, not the Kenwood software, but one that<br>
> they purchased.<br>
> I don't recall the name, but I think it starts with an R.<br>
> At any rate, I'd sooner buy a Kenwood cable than that other software and<br>
> keep using Chirp.<br>
> Hopefully I didn't get it mixed up with the Radioddity cable.<br>
> I thought I had the right cable with the Radioddity when I sent it off.<br>
> I don't know if they put the name of the associated radio on the cables,<br>
> since I'm Blind.<br>
> But any who, would this be an error for the wrong cable?<br>
> Thanks.<br>
> Glenn<br>
<br>
Hi Glenn,<br>
<br>
>From what you are describing it sounds like you Linux user doen't have<br>
permission to access the port. Either run CHIRP as root or as your<br>
Linus user to the dialout group.<br>
<br>
I also have a Kenwood TH-F6a. CHIRP programs it in "live" mode.<br>
<br>
Jim KC9HI<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
This message was sent to Glenn at <a href="mailto:glennervin@cableone.net" target="_blank" rel="noreferrer">glennervin@cableone.net</a><br>
To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
This message was sent to D.J.J. Ring, Jr. at <a href="mailto:n1ea@arrl.net" target="_blank" rel="noreferrer">n1ea@arrl.net</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
</blockquote></div></div></div>