<div><div dir="auto">I am new to Chirp. My radio, a Jetstream JT-270MH, has the capability of specifying both a tone encode (for keying a repeater) and a tone decode (for validating that transmissions received) are from the correct repeater. I had manually entered these into the radio, and it was working correctly.</div><div dir="auto"><br></div><div dir="auto">Then I introduced Chirp into the picture. Chirp has columns for both Tone and ToneSql. I have been unable to get the correct tone to show in both columns. Generally, I see a value in the Tone column combined with 'Tone' in the Tone Mode column. Alternatively, I see a value in the ToneSql column and 'TSQL' in the Tone Mode column.</div><div dir="auto"><br></div><div dir="auto">Is this the correct display, and if so which one tells me that Chirp is programming the tone for transmissions in both directions ?</div><div dir="auto"><br></div><div dir="auto">Note that I can open the memory line in a Properties window, set both Tone and ToneSql to the same value, but they do not stick when clicking OK.</div><div dir="auto"><br></div><div dir="auto">Also note that I have opened bug # 7475 concerning the precise radio profile used to clone this data, and issues encountered, so there could be a connection, but seems unlikely to me.</div>
</div>