<div dir="ltr">Chuck, The huge problem with the NanpPi Duo, and all of the teensy boards from FriendlyELEC or anyone except Raspberry, is the lack of a large support base. With the Raspberry PI, you get the entire massive user base that will give you help if you need it, in many different forums. If you have lots of free time and really enjoy problem solving on Linux systems, the NanoPi is OK. In my case, my desire for absolutely minimizing the SWaP (Size, Weight, and Power) justifies the extra effort. If it were just CHIRP, then no, but I'm also running Direwolf, and I therefore need audio input. Audio input on a Raspberry Pi needs a USB audio dongle. The dongle and its cabling are larger and heavier than the entire NanoPi. The NanoPi itself is about half the size of a Raspberry Pi Zero. The Zero only has a singe CPU, which may be a bit weak for Direwolf, While the NanoPi has 4 CPUs. In my application (support for a CERT field team) I will also be running a web server, Openstreetmap, and some specialized applications. CHIRP is important if the team gets deployed on loan to a different city with a different set of repeaters.<br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 9, 2019 at 3:14 PM Chuck Hast <<a href="mailto:kp4djt@gmail.com">kp4djt@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Those are beautiful pieces of art... Gotta get me one.... Still love my Pi's though...<div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 9, 2019 at 1:37 PM Dan Clemmensen <<a href="mailto:danclemmensen@gmail.com" target="_blank">danclemmensen@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Here is the requested diagram for the FT-4. Note that the Baofang uses a different cable.</div><div><br></div><div>WARNING: Please do not blindly adapt this for other radios. This entire scheme can probably be adapted for any radio that uses a 3.3V setial connection, but if you plug in an older radio that uses higher voltages, you can fry you little computer, and/or your radio.</div><div><br></div><div>NOTE: if you use a serial port that is configured as a login port (a "console") you OS can spew lots of stuff to the port. This can in theory confuse your radio. This is true of any serial port the CHIRP uses in any OS, but it may be more important to think about this when using itty-bitty computers, since they tend to configure at least one serial port as a "console" port.<br></div><div><br></div><div>This scheme "should" work on any itty-bitty computer that can support CHIRP and that has a 3.3V serial port. On a Raspberry Pi, your OS will be richer. You will not need the X-over-SSH trick, and if you do use it you will need less setup. On a Raspberry Pi, you use pins (6,8,10) as (GND,TxD,RxD), and your OS will see the port as /dev/ttyS0).</div><div><br></div><div>My NanoPi Duo is running the sun8xi linux distro provided by FrendlyELEC, who manufactures the NanoPi. the distro is based on Ununtu, so you use apt-get to install packages as needed. To support CHIRP, I installed xorg, since the supplied image uses something strange. To actually use CHIRP, I use ssh -Y from my Linux desktop computer to allow CHIRP to present its X window to my desktop computer's screen via the magic of X-over-SSH.</div><div><br></div><div>I'm connecting the radio to NanoPi's second serial port, which is on pins labelled RX1 (pin 20) and TX1 (pin 22) and of course GND (pin 6) on the NanoPi headers. This port is known to the OS as /dev/ttyS1.</div><div>Here is he requested diagram:<br></div><div><br></div><div><span style="font-family:monospace,monospace">NanoPi FT-4 MIC plug<br></span></div><div><span style="font-family:monospace,monospace">pin 6 (GND)---------------------------------------------------------- sleeve</span></div><div><span style="font-family:monospace,monospace">pin 20 (RX1)----------------+-----------------------------------------tip</span></div><div><span style="font-family:monospace,monospace"> |<br></span></div><div><span style="font-family:monospace,monospace">pin 22 (TX1)---2K resistor--+<br></span></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Apr 9, 2019 at 10:33 AM <<a href="mailto:dropkick23@gmail.com" target="_blank">dropkick23@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Dan,<div><br></div><div>I'm a little brain dead when it comes to hardware. Would you post a simple diagram of how you wired FT4 to NanoPi? Witch OS are you running on the NanoPi?</div><div><br></div><div>Thanks</div><div>Fred</div></div>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
This message was sent to Dan Clemmensen at <a href="mailto:danclemmensen@gmail.com" target="_blank">danclemmensen@gmail.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a></blockquote></div>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
This message was sent to Chuck Hast at <a href="mailto:kp4djt@gmail.com" target="_blank">kp4djt@gmail.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a></blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail-m_-5523786402397908924gmail_signature"><div dir="ltr"><div><div>Chirp + Editcp + MD380Tools on Linux</div><div>Celestial!!!</div><div dir="ltr">Chuck -- KP4DJT</div></div></div></div>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
This message was sent to Dan Clemmensen at <a href="mailto:danclemmensen@gmail.com" target="_blank">danclemmensen@gmail.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@intrepid.danplanet.com</a></blockquote></div>