<div dir="ltr"><div>The FT-4 also uses a 3.3v serial connection for programming, but it&#39;s 2-wire, meaning the Tx and Rx are both on the same wire, named DATA. I use the NanoPi Duo&#39;s serial port pins (Tx and Rx) and GND. </div><div><br></div><div>The FT-4 presents GND on the 2.5mm MIC sleeve, and DATA on the 2.5mm MIC ring. I connected GND directly to Pi GND,Data directly to Pi RxD, and Pi via a 2K resistor to DATA.   CHIRP successfully downloaded and uploaded.</div><div><br></div><div>So, we have two worked examples of modern HTs directly connecting to the 3.3V serial ports of modern tiny SBCs.<br></div></div>