<div dir="auto">Will chirp connect to and program commercial Kenwood TK-805 radios? I have several and always screw up the microphone programming method.</div><br><div class="gmail_quote"><div dir="ltr">On Thu, Jul 5, 2018, 15:05 <<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send chirp_users mailing list submissions to<br>
<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-request@intrepid.danplanet.com</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:chirp_users-owner@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-owner@intrepid.danplanet.com</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of chirp_users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: chirp_users Digest, Vol 115, Issue 2 (Brian Burke)<br>
2. Re: Chirp began ten years ago today... (<a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a>)<br>
3. Re: IC-92AD funnies (Chuck Hast)<br>
4. Re: Chirp began ten years ago today... (Eric Oyen)<br>
5. Re: IC-92AD funnies (Chuck Hast)<br>
6. Re: IC-92AD funnies (Chuck Hast)<br>
7. Re: chirp_users Digest, Vol 115, Issue 2 (Dennis Wage)<br>
8. Re: IC-92AD funnies (Wenlock Burton)<br>
9. Re: IC-92AD funnies (Chuck Hast)<br>
10. Re: IC-92AD funnies (Chuck Hast)<br>
11. Re: IC-92AD funnies (Wenlock Burton)<br>
12. Re: IC-92AD funnies (Chuck Hast)<br>
13. Using Win 10 with Chirp? (Michael Pludek)<br>
14. Re: Using Win 10 with Chirp? (Jardy)<br>
15. Re: Using Win 10 with Chirp? (Jim Unroe)<br>
16. BF-H8FP programming (Jack Wimberly)<br>
17. Re: BF-H8FP programming (Trevor Holyoak)<br>
18. Re: BF-H8FP programming (Jim Unroe)<br>
19. Re: BF-H8FP programming (Chance Fulton)<br>
20. Re: BF-H8FP programming (Dennis Wage)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Wed, 4 Jul 2018 15:13:56 -0400<br>
From: Brian Burke <<a href="mailto:burke.n0imd@gmail.com" target="_blank" rel="noreferrer">burke.n0imd@gmail.com</a>><br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 115, Issue 2<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
Message-ID:<br>
<CAL8isAh6=<a href="mailto:M_9qLWVKXjed9EsbhOJH9tyapV3ApTA0kqZXkkikw@mail.gmail.com" target="_blank" rel="noreferrer">M_9qLWVKXjed9EsbhOJH9tyapV3ApTA0kqZXkkikw@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Any chance this software will work with a commercial Kenwood TK-805?<br>
<br>
On Wed, Jul 4, 2018, 15:05 <<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-request@intrepid.danplanet.com</a>><br>
wrote:<br>
<br>
> Send chirp_users mailing list submissions to<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
><br>
> To subscribe or unsubscribe via the World Wide Web, visit<br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> or, via email, send a message with subject or body 'help' to<br>
> <a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-request@intrepid.danplanet.com</a><br>
><br>
> You can reach the person managing the list at<br>
> <a href="mailto:chirp_users-owner@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-owner@intrepid.danplanet.com</a><br>
><br>
> When replying, please edit your Subject line so it is more specific<br>
> than "Re: Contents of chirp_users digest..."<br>
><br>
><br>
> Today's Topics:<br>
><br>
> 1. Re: CSV Partial Load (Jean-Paul Louis)<br>
> 2. Re: CSV Partial Load (Aubrey Turner)<br>
> 3. Re: CSV Partial Load (Ken FitzGerald-Smith)<br>
> 4. Re: CSV Partial Load (Jim Unroe)<br>
> 5. Re: CSV Partial Load (Jim Unroe)<br>
> 6. Re: Chirp began ten years ago today... (W. T. Jones)<br>
> 7. Re: CSV Partial Load (Nigel A. Gunn G8IFF/W8IFF)<br>
> 8. fail programming a Jetstream JT270M (Patricia Wilson)<br>
> 9. Re: fail programming a Jetstream JT270M (Jim Unroe)<br>
> 10. Re: fail programming a Jetstream JT270M (Patricia Wilson)<br>
> 11. Re: CSV Partial Load (Dennis Wage)<br>
> 12. Re: Chirp began ten years ago today... (Chuck Hast)<br>
> 13. Re: Chirp began ten years ago today... (<a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a>)<br>
> 14. Re: Chirp began ten years ago today... (Dennis Wage)<br>
> 15. How to empty or null tone channel in Chirp?<br>
> (<a href="mailto:survivor@cryptolab.net" target="_blank" rel="noreferrer">survivor@cryptolab.net</a>)<br>
> 16. Re: How to empty or null tone channel in Chirp? (Dennis Wage)<br>
> 17. Re: How to empty or null tone channel in Chirp? (neil b)<br>
> 18. Re: How to empty or null tone channel in Chirp? (Dennis Wage)<br>
> 19. Re: How to empty or null tone channel in Chirp? (Jim Unroe)<br>
> 20. Re: How to empty or null tone channel in Chirp? (Dennis Wage)<br>
> 21. IC-92AD funnies (Chuck Hast)<br>
> 22. Re: IC-92AD funnies (Chuck Hast)<br>
> 23. Re: Chirp began ten years ago today... (BobJ)<br>
> 24. Re: Chirp began ten years ago today... (Dennis Wage)<br>
> 25. Re: Chirp began ten years ago today... (Glenn Ervin)<br>
> 26. Re: Chirp began ten years ago today...<br>
> (Nigel A. Gunn G8IFF/W8IFF)<br>
> 27. Re: Chirp began ten years ago today... (Chuck Hast)<br>
><br>
><br>
> ----------------------------------------------------------------------<br>
><br>
> Message: 1<br>
> Date: Tue, 3 Jul 2018 15:02:06 -0400<br>
> From: Jean-Paul Louis <<a href="mailto:louijp@yahoo.com" target="_blank" rel="noreferrer">louijp@yahoo.com</a>><br>
> Subject: Re: [chirp_users] CSV Partial Load<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:0BE7A004-925C-4FE2-9218-364F1C569DC5@yahoo.com" target="_blank" rel="noreferrer">0BE7A004-925C-4FE2-9218-364F1C569DC5@yahoo.com</a>><br>
> Content-Type: text/plain; charset=utf-8<br>
><br>
> I think that you have a problem with the NAMES of the channels. NAMES<br>
> should not have a space as this break the rules of CSV files.<br>
> Try replacing the spaces with ?_? and that might work a lot better.<br>
><br>
> Just my $0.02,<br>
> Jean-Paul<br>
> N1JPL<br>
><br>
><br>
> > On Jul 3, 2018, at 2:50 PM, imatglamis <<a href="mailto:imatglamis@gmail.com" target="_blank" rel="noreferrer">imatglamis@gmail.com</a>> wrote:<br>
> ><br>
> > I just trimmed off all the punctuation spaces and made names 8<br>
> characters or less. Same problem, it imports and shows channels 0-34 fine<br>
> but stops at 34 with errors:<br>
> ><br>
> > Line 35: [rtone] could not convert string to float:<br>
> ><br>
> > Line 36: [rtone] could not convert string to float:<br>
> ><br>
> > Line 37: [rtone] could not convert string to float:<br>
> ><br>
> > Line 38: [rtone] could not convert string to float:<br>
> > ...<br>
> ><br>
> > to the end of the list just after channel 70cm Cal:<br>
> ><br>
> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,<br>
> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,<br>
> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,<br>
> ><br>
> > Something is happening here between 33 and 34.<br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Jean-Paul Louis at <a href="mailto:louijp@yahoo.com" target="_blank" rel="noreferrer">louijp@yahoo.com</a><br>
> > To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
><br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 2<br>
> Date: Tue, 3 Jul 2018 14:14:38 -0500<br>
> From: Aubrey Turner <<a href="mailto:aubrey.c.turner@gmail.com" target="_blank" rel="noreferrer">aubrey.c.turner@gmail.com</a>><br>
> Subject: Re: [chirp_users] CSV Partial Load<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> Message-ID: <<a href="mailto:d1ef62fc-1577-2d63-54aa-81ca27a15c02@gmail.com" target="_blank" rel="noreferrer">d1ef62fc-1577-2d63-54aa-81ca27a15c02@gmail.com</a>><br>
> Content-Type: text/plain; charset=utf-8; format=flowed<br>
><br>
> Actually, spaces are allowed in CSVs (in general just about everything<br>
> other than a COMMA is fine since it's the comma that separates the<br>
> fields).? And, we see that line 33 is loading (which also has a space).<br>
><br>
> What I am seeing, however, is a lot more empty fields in line 34 than in<br>
> the previous lines.? In particular, the warning from Chirp is for the<br>
> 'rtone' column that it can't convert the string to a float.? In line 33<br>
> this appears to have a value of 88.5 while it's empty on line 34.? I<br>
> suggest looking at the values for the tone columns to see why these are<br>
> blank (and/or why Chirp is expecting a value there).<br>
><br>
> I also see from the history of this email chain that? you're using Excel<br>
> to edit the CSV.? Excel is notorious for munging CSV files. You may want<br>
> to use a text editor of some kind instead of Excel to make sure that the<br>
> fields aren't getting messed up when the file is saved.<br>
><br>
><br>
> On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:<br>
> > I think that you have a problem with the NAMES of the channels. NAMES<br>
> should not have a space as this break the rules of CSV files.<br>
> > Try replacing the spaces with ?_? and that might work a lot better.<br>
> ><br>
> > Just my $0.02,<br>
> > Jean-Paul<br>
> > N1JPL<br>
> ><br>
> ><br>
> >> On Jul 3, 2018, at 2:50 PM, imatglamis <<a href="mailto:imatglamis@gmail.com" target="_blank" rel="noreferrer">imatglamis@gmail.com</a>> wrote:<br>
> >><br>
> >> I just trimmed off all the punctuation spaces and made names 8<br>
> characters or less. Same problem, it imports and shows channels 0-34 fine<br>
> but stops at 34 with errors:<br>
> >><br>
> >> Line 35: [rtone] could not convert string to float:<br>
> >><br>
> >> Line 36: [rtone] could not convert string to float:<br>
> >><br>
> >> Line 37: [rtone] could not convert string to float:<br>
> >><br>
> >> Line 38: [rtone] could not convert string to float:<br>
> >> ...<br>
> >><br>
> >> to the end of the list just after channel 70cm Cal:<br>
> >><br>
> >> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> >> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> >> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> >> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,<br>
> >> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,<br>
> >> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,<br>
> >><br>
> >> Something is happening here between 33 and 34.<br>
> >> _______________________________________________<br>
> >> chirp_users mailing list<br>
> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> >> This message was sent to Jean-Paul Louis at <a href="mailto:louijp@yahoo.com" target="_blank" rel="noreferrer">louijp@yahoo.com</a><br>
> >> To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Aubrey Turner at <a href="mailto:aubrey.c.turner@gmail.com" target="_blank" rel="noreferrer">aubrey.c.turner@gmail.com</a><br>
> > To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
><br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 3<br>
> Date: Tue, 3 Jul 2018 20:45:05 +0100<br>
> From: Ken FitzGerald-Smith <<a href="mailto:ei7dkb@logicatrium.com" target="_blank" rel="noreferrer">ei7dkb@logicatrium.com</a>><br>
> Subject: Re: [chirp_users] CSV Partial Load<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:36A3E9FC-E5A6-4A73-A05B-D53EBA681348@logicatrium.com" target="_blank" rel="noreferrer">36A3E9FC-E5A6-4A73-A05B-D53EBA681348@logicatrium.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> He needs values for all these fields in your csv file: rToneFreq,<br>
> cToneFreq, DtcsCode, DtcsPolarity, Mode, TStep<br>
><br>
> rToneFreq & cToneFreq need to be proper ctcss tones. 67.0 will do<br>
><br>
> DtcsCode needs to be valid too. First valid code is 023<br>
><br>
> DtcsPolarity needs to be one of [?NN', 'NR', 'RN', 'RR']<br>
><br>
> Mode needs to be AM or FM at least<br>
><br>
> TStep (tuning step) needs to be numeric! Zero will do<br>
><br>
> So this:<br>
><br>
> 35,BECKER1/AGAVE,153.62,,0,,,,,,FM,,,,,,,<br>
><br>
> Needs to become this at a minimum:<br>
><br>
> 35,BECKER1/AGAVE,153.62,,0,,67.0,67.0,023,NN,FM,12.5,,,,,,<br>
><br>
> There is no problem with the / in the name, but remember if you see a<br>
> conversion error like ?String to Float? for any field, that indicates that<br>
> you must supply at least a numeric value, not an empty field.<br>
><br>
> I hope this helps<br>
><br>
> Ken<br>
><br>
> > On 3 Jul 2018, at 20:14, Aubrey Turner <<a href="mailto:aubrey.c.turner@gmail.com" target="_blank" rel="noreferrer">aubrey.c.turner@gmail.com</a>><br>
> wrote:<br>
> ><br>
> > Actually, spaces are allowed in CSVs (in general just about everything<br>
> > other than a COMMA is fine since it's the comma that separates the<br>
> > fields). And, we see that line 33 is loading (which also has a space).<br>
> ><br>
> > What I am seeing, however, is a lot more empty fields in line 34 than in<br>
> > the previous lines. In particular, the warning from Chirp is for the<br>
> > 'rtone' column that it can't convert the string to a float. In line 33<br>
> > this appears to have a value of 88.5 while it's empty on line 34. I<br>
> > suggest looking at the values for the tone columns to see why these are<br>
> > blank (and/or why Chirp is expecting a value there).<br>
> ><br>
> > I also see from the history of this email chain that you're using Excel<br>
> > to edit the CSV. Excel is notorious for munging CSV files. You may want<br>
> > to use a text editor of some kind instead of Excel to make sure that the<br>
> > fields aren't getting messed up when the file is saved.<br>
> ><br>
> ><br>
> > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote:<br>
> >> I think that you have a problem with the NAMES of the channels. NAMES<br>
> should not have a space as this break the rules of CSV files.<br>
> >> Try replacing the spaces with ?_? and that might work a lot better.<br>
> >><br>
> >> Just my $0.02,<br>
> >> Jean-Paul<br>
> >> N1JPL<br>
> >><br>
> >><br>
> >>> On Jul 3, 2018, at 2:50 PM, imatglamis <<a href="mailto:imatglamis@gmail.com" target="_blank" rel="noreferrer">imatglamis@gmail.com</a>> wrote:<br>
> >>><br>
> >>> I just trimmed off all the punctuation spaces and made names 8<br>
> characters or less. Same problem, it imports and shows channels 0-34 fine<br>
> but stops at 34 with errors:<br>
> >>><br>
> >>> Line 35: [rtone] could not convert string to float:<br>
> >>><br>
> >>> Line 36: [rtone] could not convert string to float:<br>
> >>><br>
> >>> Line 37: [rtone] could not convert string to float:<br>
> >>><br>
> >>> Line 38: [rtone] could not convert string to float:<br>
> >>> ...<br>
> >>><br>
> >>> to the end of the list just after channel 70cm Cal:<br>
> >>><br>
> >>> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> >>> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> >>> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> >>> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,<br>
> >>> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,<br>
> >>> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,<br>
> >>><br>
> >>> Something is happening here between 33 and 34.<br>
> >>> _______________________________________________<br>
> >>> chirp_users mailing list<br>
> >>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> >>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> >>> This message was sent to Jean-Paul Louis at <a href="mailto:louijp@yahoo.com" target="_blank" rel="noreferrer">louijp@yahoo.com</a><br>
> >>> To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> >> _______________________________________________<br>
> >> chirp_users mailing list<br>
> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> >> This message was sent to Aubrey Turner at <a href="mailto:aubrey.c.turner@gmail.com" target="_blank" rel="noreferrer">aubrey.c.turner@gmail.com</a><br>
> <mailto:<a href="mailto:aubrey.c.turner@gmail.com" target="_blank" rel="noreferrer">aubrey.c.turner@gmail.com</a>><br>
> >> To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a> <mailto:<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a>><br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a> <mailto:<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a> <<br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>><br>
> > This message was sent to Bitfarmer at <a href="mailto:ei7dkb@logicatrium.com" target="_blank" rel="noreferrer">ei7dkb@logicatrium.com</a> <mailto:<br>
> <a href="mailto:ei7dkb@logicatrium.com" target="_blank" rel="noreferrer">ei7dkb@logicatrium.com</a>><br>
> > To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a> <mailto:<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a>><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/0a00f7b4/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/0a00f7b4/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 4<br>
> Date: Tue, 3 Jul 2018 16:38:21 -0400<br>
> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank" rel="noreferrer">rock.unroe@gmail.com</a>><br>
> Subject: Re: [chirp_users] CSV Partial Load<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <CADnO8U52HAgcL8EQacRgwrpf+1HtasvyyF=<br>
> <a href="mailto:yW50_PnF6LodMyw@mail.gmail.com" target="_blank" rel="noreferrer">yW50_PnF6LodMyw@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="UTF-8"<br>
><br>
> Well one thing is starting at 34 you removed the default values for<br>
> Tone, ToneSql, DTCS Code, DTCS Rx Code and DTCS Pol. They should be<br>
> there even if they are not used. The Tone Mode value determines if<br>
> they are used or not. And it looks like it is missing from all the<br>
> memory rows.<br>
><br>
> Jim<br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 5<br>
> Date: Tue, 3 Jul 2018 16:43:25 -0400<br>
> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank" rel="noreferrer">rock.unroe@gmail.com</a>><br>
> Subject: Re: [chirp_users] CSV Partial Load<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<br>
> <a href="mailto:CADnO8U6DjF8C_vMKArWksq0A2HW4mSDdYbs1VN3jr0BaaUo-aA@mail.gmail.com" target="_blank" rel="noreferrer">CADnO8U6DjF8C_vMKArWksq0A2HW4mSDdYbs1VN3jr0BaaUo-aA@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="UTF-8"<br>
><br>
> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,<br>
> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,<br>
> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,<br>
><br>
> Program memory 31 using the CHIRP UI and then export it to a CSV file.<br>
> That is what the others need to look like.<br>
><br>
> Jim<br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 6<br>
> Date: Tue, 3 Jul 2018 18:53:17 -0400<br>
> From: "W. T. Jones" <<a href="mailto:wn3lif@gmail.com" target="_blank" rel="noreferrer">wn3lif@gmail.com</a>><br>
> Subject: Re: [chirp_users] Chirp began ten years ago today...<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <CA+M-Wc_sa1=<br>
> <a href="mailto:Rt880xOsggM3m-1PP2HRT4dcKxPy5GbZBELcxag@mail.gmail.com" target="_blank" rel="noreferrer">Rt880xOsggM3m-1PP2HRT4dcKxPy5GbZBELcxag@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Thanks to All that made Chirp possible! Never knew there were so many.<br>
><br>
><br>
><br>
> Regards,<br>
><br>
> WT<br>
> Real heroes do not wear capes. They wear dog tags, turnout gear, and<br>
> badges!<br>
><br>
> On Tue, Jul 3, 2018 at 2:50 PM, John La <<a href="mailto:Johnla@usa.net" target="_blank" rel="noreferrer">Johnla@usa.net</a>> wrote:<br>
><br>
> ><br>
> ><br>
> > *Thank you* to Team CHIRP.<br>
> > An invaluable service to the Amateur Radio community.<br>
> ><br>
> > John ?Miklor? K3NXU<br>
> ><br>
> > <a href="http://www.miklor.com" rel="noreferrer noreferrer" target="_blank">http://www.miklor.com</a><br>
> ><br>
> > <a href="http://www.miklor.com/DMR/" rel="noreferrer noreferrer" target="_blank">http://www.miklor.com/DMR/</a><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > *From:* <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a> [mailto:<br>
> > <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a>] *On Behalf Of *Barry K<br>
> > *Sent:* Tuesday, July 3, 2018 2:32 PM<br>
> ><br>
> > *To:* Discussion of CHIRP<br>
> > *Subject:* Re: [chirp_users] Chirp began ten years ago today...<br>
> ><br>
> ><br>
> ><br>
> > *yes this program has saved a lot of hours*<br>
> ><br>
> > *thanks for it*<br>
> ><br>
> ><br>
> ><br>
> > *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT, SKYWARN<br>
> > 128A*<br>
> ><br>
> ><br>
> ><br>
> ><br>
> > ------------------------------<br>
> ><br>
> > *From:* <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a> <<br>
> > <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a>> on behalf of Norman Sebern <<br>
> > <a href="mailto:nsebern14@gmail.com" target="_blank" rel="noreferrer">nsebern14@gmail.com</a>><br>
> > *Sent:* Tuesday, July 3, 2018 10:38 AM<br>
> > *To:* Discussion of CHIRP<br>
> > *Subject:* Re: [chirp_users] Chirp began ten years ago today...<br>
> ><br>
> ><br>
> ><br>
> > Thank YOU.<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > On Tue, Jul 3, 2018, 7:32 AM Frank <<a href="mailto:k1hlz@pcicon.net" target="_blank" rel="noreferrer">k1hlz@pcicon.net</a>> wrote:<br>
> ><br>
> > Congratulations on reaching your 10 year milestone with such a great<br>
> piece<br>
> > of software!<br>
> > As a fairly new Ham, it's made my life a lot easier.<br>
> > Thank you!<br>
> ><br>
> > 73s<br>
> > Frank<br>
> > K1HLZ<br>
> ><br>
> > On July 3, 2018 9:24:44 AM EDT, Dan Smith <<a href="mailto:dsmith@danplanet.com" target="_blank" rel="noreferrer">dsmith@danplanet.com</a>> wrote:<br>
> ><br>
> > Hi all,<br>
> ><br>
> > I just wanted to share a milestone in the CHIRP project with the<br>
> community. Ten years ago today, on July 3rd 2008, I made the first commit<br>
> to the repository which started the chirp project:<br>
> ><br>
> ><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb</a><br>
> ><br>
> > It was just a rough bit of code that could talk to an Icom IC-92AD and I<br>
> was apparently thinking of calling it "repidr". I do not recall what that<br>
> was supposed to stand for, but by July 16th I had renamed it to CHIRP:<br>
> ><br>
> ><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b</a><br>
> ><br>
> > By July 19th, I was ready to make something available, which was just<br>
> able to read and write CSV files, and talk to Icom IC-9x radios and the<br>
> ID-800H. This was the first version 0.1.1:<br>
> ><br>
> ><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7</a><br>
> ><br>
> > I still remember the large stack of paper on the corner of my desk where<br>
> I had written out tons of hex, all in pencil, erased and re-written many<br>
> times, trying to decode the first few radio memories and looking for<br>
> patterns to make it easier.<br>
> ><br>
> > The project has come a long way since then, largely due to the help and<br>
> involvement of other volunteers and users. While the first release<br>
> supported two radio models, the latest one supports 228 distinct models,<br>
> with more if you count the many clones that exist. The users mailing list<br>
> has a fairly amazing 2892 people subscribed, from all over the world,<br>
> representing a tiny fraction of the total user base.<br>
> ><br>
> > So, I just want to thank all the people who have made CHIRP possible and<br>
> successful. Especially contributors of code, bug reports, and test reports,<br>
> but also people who have spent hours on this list helping others and being<br>
> the support system that allows volunteer developers to focus on what they<br>
> do best. Thanks to anyone who has ever sent a donation, as well as the<br>
> commercial outfits who have contributed radios and other help. There are<br>
> too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few<br>
> that come to mind as having a substantial impact.<br>
> ><br>
> > At the end of this email is a very rough list of all the code<br>
> contributors to the project, extracted from the repository with minimal<br>
> attempts to squash some duplicates. These are the rock stars that have<br>
> gotten us to where we are today, so please join me in thanking them for<br>
> spending their nights and weekends making this project the success that it<br>
> is today!<br>
> ><br>
> > --Dan<br>
> ><br>
> ><br>
> > Commits Contributor<br>
> > -------|<br>
> ><br>
> > ------------------------------<br>
> ><br>
> ><br>
> > 1865 Dan Smith<br>
> > 240 Jim Unroe<br>
> > 189 Tom Hayward<br>
> > 188 Marco Filippi<br>
> > 137 Zach Welch<br>
> > 59 Jens Jensen<br>
> > 58 Pavel Milanes (CO7WT)<br>
> > 26 K. Arvanitis<br>
> > 15 Tyler Tidman<br>
> > 12 Richard Cochran<br>
> > 10 Dan Drogichen<br>
> > 8 Sean Burford<br>
> > 8 Rick Farina<br>
> > 8 Michael Wagner<br>
> > 8 Eric Allen<br>
> > 8 Brian Dickman<br>
> > 7 SASANO Takayoshi<br>
> > 6 Vernon Mauery<br>
> > 6 Ron Wellsted<br>
> > 6 Rhett Robinson<br>
> > 6 Ray Cielencki<br>
> > 5 Rick DeWitt<br>
> > 5 Keith Williamson<br>
> > 4 Tim Smith<br>
> > 4 Nicolas Pike<br>
> > 4 Mathias Weyland<br>
> > 4 IT2 Stuart Blake Tener, USNR (N3GWG)<br>
> > 4 David Griffith<br>
> > 4 Chris Fosnight<br>
> > 4 Angus Ainslie<br>
> > 4 Alexey K<br>
> > 3 Rick Farina<br>
> > 3 Leo B?rring<br>
> > 3 Jon K Hellan<br>
> > 3 Christopher Hoover<br>
> > 3 Ben Smith<br>
> > 2 Richard Birch<br>
> > 2 Nathan Crapo<br>
> > 2 Michal Demin<br>
> > 2 Louie Ilievski<br>
> > 2 Johan Adler<br>
> > 2 Dean Gibson<br>
> > 2 Cody P Schafer<br>
> > 1 Windsor Schmidt<br>
> > 1 Wade Simmons<br>
> > 1 Stuart Tener<br>
> > 1 Steve Conklin<br>
> > 1 Ryan Tourge K2RRT x<br>
> > 1 Robert Terzi<br>
> > 1 Robert Morris<br>
> > 1 Patrik Nilsson<br>
> > 1 nytowl<br>
> > 1 Nolan Darilek<br>
> > 1 nicolas jon pike<br>
> > 1 Mike Pittaro<br>
> > 1 Michal D<br>
> > 1 Michael Lippold<br>
> > 1 Mark Adams<br>
> > 1 <a href="mailto:loudawgucr@gmail.com" target="_blank" rel="noreferrer">loudawgucr@gmail.com</a><br>
> > 1 Krystian SP6IT<br>
> > 1 <a href="mailto:kc1ckh@arrl.net" target="_blank" rel="noreferrer">kc1ckh@arrl.net</a><br>
> > 1 Jeremy McDermond<br>
> > 1 James Lee N1DDK<br>
> > 1 Imuli<br>
> > 1 Eric Dropps<br>
> > 1 Ed Santiago<br>
> > 1 Declan Rieb<br>
> > 1 David Fannin<br>
> > 1 Dave Allan<br>
> > 1 Dale Tyler<br>
> > 1 Charles Stewart<br>
> > 1 Brett Bump<br>
> > 1 Brad Ackerman<br>
> > 1 Attilio Pannella<br>
> > 1 Andrew<br>
> > 1 Adam Coddington<br>
> > 1 ac2lq<br>
> > 1 Aaron Pelly<br>
> ><br>
> > ------------------------------<br>
> ><br>
> ><br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to FRANK G at <a href="mailto:k1hlz@pcicon.net" target="_blank" rel="noreferrer">k1hlz@pcicon.net</a><br>
> > To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> ><br>
> ><br>
> > --<br>
> > Sent from my Android device with K-9 Mail. Please excuse my brevity.<br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Norman Sebern at <a href="mailto:nsebern14@gmail.com" target="_blank" rel="noreferrer">nsebern14@gmail.com</a><br>
> > To unsubscribe, send an email to chirp_users-unsubscribe@<br>
> > <a href="http://intrepid.danplanet.com" rel="noreferrer noreferrer" target="_blank">intrepid.danplanet.com</a><br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to WT at <a href="mailto:wn3lif@gmail.com" target="_blank" rel="noreferrer">wn3lif@gmail.com</a><br>
> > To unsubscribe, send an email to chirp_users-unsubscribe@<br>
> > <a href="http://intrepid.danplanet.com" rel="noreferrer noreferrer" target="_blank">intrepid.danplanet.com</a><br>
> ><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/ea5689fe/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/ea5689fe/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 7<br>
> Date: Tue, 3 Jul 2018 19:08:19 -0400 (EDT)<br>
> From: "Nigel A. Gunn G8IFF/W8IFF" <<a href="mailto:nigel@ngunn.net" target="_blank" rel="noreferrer">nigel@ngunn.net</a>><br>
> Subject: Re: [chirp_users] CSV Partial Load<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>>,<br>
> imatglamis <<a href="mailto:imatglamis@gmail.com" target="_blank" rel="noreferrer">imatglamis@gmail.com</a>><br>
> Message-ID: <<a href="mailto:677469876.85416.1530659299549@email.1and1.com" target="_blank" rel="noreferrer">677469876.85416.1530659299549@email.1and1.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Your frequency doesn't conform to an acceptable frequency step?<br>
><br>
><br>
> > On 03 July 2018 at 14:50 imatglamis <<a href="mailto:imatglamis@gmail.com" target="_blank" rel="noreferrer">imatglamis@gmail.com</a>> wrote:<br>
> ><br>
> > I just trimmed off all the punctuation spaces and made names 8<br>
> characters or less. Same problem, it imports and shows channels 0-34 fine<br>
> but stops at 34 with errors:<br>
> ><br>
> > Line 35: [rtone] could not convert string to float:<br>
> ><br>
> > Line 36: [rtone] could not convert string to float:<br>
> ><br>
> > Line 37: [rtone] could not convert string to float:<br>
> ><br>
> > Line 38: [rtone] could not convert string to float:<br>
> > ...<br>
> ><br>
> > to the end of the list just after channel 70cm Cal:<br>
> ><br>
> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,<br>
> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,<br>
> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,<br>
> ><br>
> > Something is happening here between 33 and 34.<br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Nigel Gunn, W8IFF at <a href="mailto:nigel@ngunn.net" target="_blank" rel="noreferrer">nigel@ngunn.net</a><br>
> > To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> ><br>
><br>
><br>
> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937<br>
> 825 5032<br>
> Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail <a href="mailto:nigel@ngunn.net" target="_blank" rel="noreferrer">nigel@ngunn.net</a> www<br>
> <a href="http://www.ngunn.net" rel="noreferrer noreferrer" target="_blank">http://www.ngunn.net</a><br>
> Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club<br>
> International #385,<br>
> Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.<br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/28a00e15/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/28a00e15/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 8<br>
> Date: Tue, 3 Jul 2018 16:30:34 -0700<br>
> From: Patricia Wilson <<a href="mailto:wilson.pr.gm@gmail.com" target="_blank" rel="noreferrer">wilson.pr.gm@gmail.com</a>><br>
> Subject: [chirp_users] fail programming a Jetstream JT270M<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> Message-ID:<br>
> <CAAwRy+ROdfSYwuKNceArVo3WsCOi+zCQTnr8bn9zrdrb=<br>
> <a href="mailto:nZNVA@mail.gmail.com" target="_blank" rel="noreferrer">nZNVA@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> I am attempting to program a Jetstream JT270M using a Prolific cable.<br>
><br>
> The CHIRP Error message pop-up says<br>
><br>
> An error has occurred<br>
> could not open com4 (Error 2) The system can not find the file specified.<br>
><br>
> In the WIN10 Device manager listing for COM4 it says<br>
> Driver provide is prolific<br>
> Date is 10-17-2017<br>
> Version is 3.8.18.0<br>
><br>
> Device status is<br>
> This device cannot start. (Code 10)<br>
> A device which does not exist was specified.<br>
><br>
> Can anyone help me out with this?<br>
><br>
><br>
><br>
><br>
> --<br>
><br>
> Patricia Wilson<br>
> Apache Junction, AZ<br>
> Member NRA, ARRL<br>
> WB8DXX (Extra)<br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/b3a2feed/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/b3a2feed/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 9<br>
> Date: Tue, 3 Jul 2018 19:39:39 -0400<br>
> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank" rel="noreferrer">rock.unroe@gmail.com</a>><br>
> Subject: Re: [chirp_users] fail programming a Jetstream JT270M<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<br>
> <a href="mailto:CADnO8U5mLqAqAvcaHt8ZAJ_24ZWCzQqxK4GZ0cKruK39jvMaEg@mail.gmail.com" target="_blank" rel="noreferrer">CADnO8U5mLqAqAvcaHt8ZAJ_24ZWCzQqxK4GZ0cKruK39jvMaEg@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="UTF-8"<br>
><br>
> > The CHIRP Error message pop-up says<br>
> ><br>
> > An error has occurred<br>
> > could not open com4 (Error 2) The system can not find the file specified.<br>
> ><br>
> > In the WIN10 Device manager listing for COM4 it says<br>
> > Driver provide is prolific<br>
> > Date is 10-17-2017<br>
> > Version is 3.8.18.0<br>
> ><br>
> > Device status is<br>
> > This device cannot start. (Code 10)<br>
> > A device which does not exist was specified.<br>
> ><br>
> > Can anyone help me out with this?<br>
><br>
> This is a common problem, You must download, install and select an<br>
> older Prolific device driver (V3.2.0.0 ). This page has a link to the<br>
> device driver and instructions for installing it.<br>
><br>
> <a href="http://www.miklor.com/COM/UV_Drivers.php" rel="noreferrer noreferrer" target="_blank">http://www.miklor.com/COM/UV_Drivers.php</a><br>
><br>
> Jim KC9HI<br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 10<br>
> Date: Tue, 3 Jul 2018 17:27:20 -0700<br>
> From: Patricia Wilson <<a href="mailto:wilson.pr.gm@gmail.com" target="_blank" rel="noreferrer">wilson.pr.gm@gmail.com</a>><br>
> Subject: Re: [chirp_users] fail programming a Jetstream JT270M<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> Message-ID:<br>
> <CAAwRy+Tp69WhocVuPLVtTjRHA+sD1Dxb3WcG=<br>
> <a href="mailto:y-mEbN7nnV0uw@mail.gmail.com" target="_blank" rel="noreferrer">y-mEbN7nnV0uw@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> I had tried that and somehow screwed up. This time around SUCCESS!!! Thank<br>
> you ever so much and<br>
><br>
> CONGRATS to Dan on the 10th anniversary.<br>
><br>
> On Tue, Jul 3, 2018 at 4:40 PM Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank" rel="noreferrer">rock.unroe@gmail.com</a>> wrote:<br>
><br>
> > > The CHIRP Error message pop-up says<br>
> > ><br>
> > > An error has occurred<br>
> > > could not open com4 (Error 2) The system can not find the file<br>
> specified.<br>
> > ><br>
> > > In the WIN10 Device manager listing for COM4 it says<br>
> > > Driver provide is prolific<br>
> > > Date is 10-17-2017<br>
> > > Version is 3.8.18.0<br>
> > ><br>
> > > Device status is<br>
> > > This device cannot start. (Code 10)<br>
> > > A device which does not exist was specified.<br>
> > ><br>
> > > Can anyone help me out with this?<br>
> ><br>
> > This is a common problem, You must download, install and select an<br>
> > older Prolific device driver (V3.2.0.0 ). This page has a link to the<br>
> > device driver and instructions for installing it.<br>
> ><br>
> > <a href="http://www.miklor.com/COM/UV_Drivers.php" rel="noreferrer noreferrer" target="_blank">http://www.miklor.com/COM/UV_Drivers.php</a><br>
> ><br>
> > Jim KC9HI<br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Patricia Wilson at <a href="mailto:wilson.pr.gm@gmail.com" target="_blank" rel="noreferrer">wilson.pr.gm@gmail.com</a><br>
> > To unsubscribe, send an email to<br>
> > <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> ><br>
><br>
><br>
> --<br>
><br>
> Patricia Wilson<br>
> Apache Junction, AZ<br>
> Member NRA, ARRL<br>
> WB8DXX (Extra)<br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/93a7464e/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/93a7464e/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 11<br>
> Date: Tue, 3 Jul 2018 22:12:41 -0500<br>
> From: Dennis Wage <<a href="mailto:dwage@dwage.com" target="_blank" rel="noreferrer">dwage@dwage.com</a>><br>
> Subject: Re: [chirp_users] CSV Partial Load<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<br>
> <a href="mailto:CAE1d062WotJGkESaQTQ0RqwQxy_hCh8L-xU52YWUAXVg667XzQ@mail.gmail.com" target="_blank" rel="noreferrer">CAE1d062WotJGkESaQTQ0RqwQxy_hCh8L-xU52YWUAXVg667XzQ@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> ??<br>
> Columns G, H, I, J, and L require data be in the CSV file. Of these columns<br>
> some will produce a Chirp error but if you continue Chirp will kindly fill<br>
> in dummy data. And some of the columns require data, that if not there will<br>
> stop the import.<br>
> I just don't have time to research and tell you which. But simply put, put<br>
> data in all fields.<br>
><br>
> This will work:<br>
> 88.5 88.5 23 NN FM 5 and so will this:<br>
> 67 67 23 NN FM 5<br>
> Your rTone on channel 57, line 58 is wrong too.<br>
><br>
> Dennis M. Wage (W9BOQ)<br>
><br>
> 245 Corum Hill Road<br>
> Castalian Springs, TN 37031<br>
> (615) 310-4242 Cell<br>
> (615) 562-5128 Home<br>
> <a href="http://hammondb3organ.net" rel="noreferrer noreferrer" target="_blank">http://hammondb3organ.net</a><br>
> <a href="http://overdubs.net" rel="noreferrer noreferrer" target="_blank">http://overdubs.net</a><br>
><br>
> On Tue, Jul 3, 2018 at 6:08 PM, Nigel A. Gunn G8IFF/W8IFF <<a href="mailto:nigel@ngunn.net" target="_blank" rel="noreferrer">nigel@ngunn.net</a><br>
> ><br>
> wrote:<br>
><br>
> > Your frequency doesn't conform to an acceptable frequency step?<br>
> ><br>
> ><br>
> > On 03 July 2018 at 14:50 imatglamis <<a href="mailto:imatglamis@gmail.com" target="_blank" rel="noreferrer">imatglamis@gmail.com</a>> wrote:<br>
> ><br>
> > I just trimmed off all the punctuation spaces and made names 8 characters<br>
> > or less. Same problem, it imports and shows channels 0-34 fine but stops<br>
> > at 34 with errors:<br>
> ><br>
> > Line 35: [rtone] could not convert string to float:<br>
> ><br>
> > Line 36: [rtone] could not convert string to float:<br>
> ><br>
> > Line 37: [rtone] could not convert string to float:<br>
> ><br>
> > Line 38: [rtone] could not convert string to float:<br>
> > ...<br>
> ><br>
> > to the end of the list just after channel 70cm Cal:<br>
> ><br>
> > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,,<br>
> > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,,<br>
> > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,,<br>
> > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,,<br>
> ><br>
> > Something is happening here between 33 and 34.<br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Nigel Gunn, W8IFF at <a href="mailto:nigel@ngunn.net" target="_blank" rel="noreferrer">nigel@ngunn.net</a><br>
> > To unsubscribe, send an email to chirp_users-unsubscribe@<br>
> > <a href="http://intrepid.danplanet.com" rel="noreferrer noreferrer" target="_blank">intrepid.danplanet.com</a><br>
> ><br>
> ><br>
> > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1<br>
> 937<br>
> > 825 5032<br>
> > Amateur Radio G8IFF W8IFF (was KC8NHF 9H3GN), e-mail <a href="mailto:nigel@ngunn.net" target="_blank" rel="noreferrer">nigel@ngunn.net</a> www<br>
> > <a href="http://www.ngunn.net" rel="noreferrer noreferrer" target="_blank">http://www.ngunn.net</a><br>
> > Member of ARRL, QRPARCI #11644, SOC #548, Flying Pigs QRP Club<br>
> > International #385,<br>
> > Dayton ARA #2128, AMSAT-NA LM-1691, GCARES, EAA382.<br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Dennis Wage at <a href="mailto:dwage@dwage.com" target="_blank" rel="noreferrer">dwage@dwage.com</a><br>
> > To unsubscribe, send an email to chirp_users-unsubscribe@<br>
> > <a href="http://intrepid.danplanet.com" rel="noreferrer noreferrer" target="_blank">intrepid.danplanet.com</a><br>
> ><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/c4cdd456/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/c4cdd456/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 12<br>
> Date: Tue, 3 Jul 2018 23:51:12 -0500<br>
> From: Chuck Hast <<a href="mailto:kp4djt@gmail.com" target="_blank" rel="noreferrer">kp4djt@gmail.com</a>><br>
> Subject: Re: [chirp_users] Chirp began ten years ago today...<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<br>
> <a href="mailto:CAN9xdP80-orjA2bSoXvSeMaGkD_SwiDLzEbUwc8bb40FNEDQtg@mail.gmail.com" target="_blank" rel="noreferrer">CAN9xdP80-orjA2bSoXvSeMaGkD_SwiDLzEbUwc8bb40FNEDQtg@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Dan,<br>
> First a big hat off to you and all on that list for the great work and<br>
> piece of art.<br>
> It is funny, I was working in Kalama WA in a newly opened glass plant, the<br>
> company that<br>
> I worked for had sold them the fore hearths and glass container inspection<br>
> machines. My<br>
> job was to bring those machines on line and then train and shepherd those<br>
> folks in the<br>
> inspections of the bottles. I had tons of overtime so I toddled down to HRO<br>
> in PDX and<br>
> got me a 92AT. That was I think in late Aug 2008 or Sept. I know it had not<br>
> started raining<br>
> yet and the weather was still good. It was one of the folks at HRO that<br>
> aimed me your<br>
> direction I believe it was. I did not know that the project was that new. I<br>
> do not remember<br>
> when I downloaded the first code, but it worked on that 92AT (I still have<br>
> it).<br>
><br>
> By way I now live in Oklahoma, but I sure miss the NW...<br>
><br>
> Looks like I joined the list on 20 Jun 2009.<br>
><br>
> On Tue, Jul 3, 2018 at 5:53 PM W. T. Jones <<a href="mailto:wn3lif@gmail.com" target="_blank" rel="noreferrer">wn3lif@gmail.com</a>> wrote:<br>
><br>
> > Thanks to All that made Chirp possible! Never knew there were so many.<br>
> ><br>
> ><br>
> ><br>
> > Regards,<br>
> ><br>
> > WT<br>
> > Real heroes do not wear capes. They wear dog tags, turnout gear, and<br>
> > badges!<br>
> ><br>
> > On Tue, Jul 3, 2018 at 2:50 PM, John La <<a href="mailto:Johnla@usa.net" target="_blank" rel="noreferrer">Johnla@usa.net</a>> wrote:<br>
> ><br>
> >><br>
> >><br>
> >> *Thank you* to Team CHIRP.<br>
> >> An invaluable service to the Amateur Radio community.<br>
> >><br>
> >> John ?Miklor? K3NXU<br>
> >><br>
> >> <a href="http://www.miklor.com" rel="noreferrer noreferrer" target="_blank">http://www.miklor.com</a><br>
> >><br>
> >> <a href="http://www.miklor.com/DMR/" rel="noreferrer noreferrer" target="_blank">http://www.miklor.com/DMR/</a><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> *From:* <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a> [mailto:<br>
> >> <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a>] *On Behalf Of *Barry K<br>
> >> *Sent:* Tuesday, July 3, 2018 2:32 PM<br>
> >><br>
> >> *To:* Discussion of CHIRP<br>
> >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...<br>
> >><br>
> >><br>
> >><br>
> >> *yes this program has saved a lot of hours*<br>
> >><br>
> >> *thanks for it*<br>
> >><br>
> >><br>
> >><br>
> >> *Barry** aka * *N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT,<br>
> >> SKYWARN 128A*<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> ------------------------------<br>
> >><br>
> >> *From:* <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a> <<br>
> >> <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a>> on behalf of Norman Sebern<br>
> <<br>
> >> <a href="mailto:nsebern14@gmail.com" target="_blank" rel="noreferrer">nsebern14@gmail.com</a>><br>
> >> *Sent:* Tuesday, July 3, 2018 10:38 AM<br>
> >> *To:* Discussion of CHIRP<br>
> >> *Subject:* Re: [chirp_users] Chirp began ten years ago today...<br>
> >><br>
> >><br>
> >><br>
> >> Thank YOU.<br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >><br>
> >> On Tue, Jul 3, 2018, 7:32 AM Frank <<a href="mailto:k1hlz@pcicon.net" target="_blank" rel="noreferrer">k1hlz@pcicon.net</a>> wrote:<br>
> >><br>
> >> Congratulations on reaching your 10 year milestone with such a great<br>
> >> piece of software!<br>
> >> As a fairly new Ham, it's made my life a lot easier.<br>
> >> Thank you!<br>
> >><br>
> >> 73s<br>
> >> Frank<br>
> >> K1HLZ<br>
> >><br>
> >> On July 3, 2018 9:24:44 AM EDT, Dan Smith <<a href="mailto:dsmith@danplanet.com" target="_blank" rel="noreferrer">dsmith@danplanet.com</a>> wrote:<br>
> >><br>
> >> Hi all,<br>
> >><br>
> >> I just wanted to share a milestone in the CHIRP project with the<br>
> community. Ten years ago today, on July 3rd 2008, I made the first commit<br>
> to the repository which started the chirp project:<br>
> >><br>
> >><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb</a><br>
> >><br>
> >> It was just a rough bit of code that could talk to an Icom IC-92AD and<br>
> I was apparently thinking of calling it "repidr". I do not recall what that<br>
> was supposed to stand for, but by July 16th I had renamed it to CHIRP:<br>
> >><br>
> >><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b</a><br>
> >><br>
> >> By July 19th, I was ready to make something available, which was just<br>
> able to read and write CSV files, and talk to Icom IC-9x radios and the<br>
> ID-800H. This was the first version 0.1.1:<br>
> >><br>
> >><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7</a><br>
> >><br>
> >> I still remember the large stack of paper on the corner of my desk<br>
> where I had written out tons of hex, all in pencil, erased and re-written<br>
> many times, trying to decode the first few radio memories and looking for<br>
> patterns to make it easier.<br>
> >><br>
> >> The project has come a long way since then, largely due to the help and<br>
> involvement of other volunteers and users. While the first release<br>
> supported two radio models, the latest one supports 228 distinct models,<br>
> with more if you count the many clones that exist. The users mailing list<br>
> has a fairly amazing 2892 people subscribed, from all over the world,<br>
> representing a tiny fraction of the total user base.<br>
> >><br>
> >> So, I just want to thank all the people who have made CHIRP possible<br>
> and successful. Especially contributors of code, bug reports, and test<br>
> reports, but also people who have spent hours on this list helping others<br>
> and being the support system that allows volunteer developers to focus on<br>
> what they do best. Thanks to anyone who has ever sent a donation, as well<br>
> as the commercial outfits who have contributed radios and other help. There<br>
> are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a<br>
> few that come to mind as having a substantial impact.<br>
> >><br>
> >> At the end of this email is a very rough list of all the code<br>
> contributors to the project, extracted from the repository with minimal<br>
> attempts to squash some duplicates. These are the rock stars that have<br>
> gotten us to where we are today, so please join me in thanking them for<br>
> spending their nights and weekends making this project the success that it<br>
> is today!<br>
> >><br>
> >> --Dan<br>
> >><br>
> >><br>
> >> Commits Contributor<br>
> >> -------|<br>
> >><br>
> >> ------------------------------<br>
> >><br>
> >><br>
> >> 1865 Dan Smith<br>
> >> 240 Jim Unroe<br>
> >> 189 Tom Hayward<br>
> >> 188 Marco Filippi<br>
> >> 137 Zach Welch<br>
> >> 59 Jens Jensen<br>
> >> 58 Pavel Milanes (CO7WT)<br>
> >> 26 K. Arvanitis<br>
> >> 15 Tyler Tidman<br>
> >> 12 Richard Cochran<br>
> >> 10 Dan Drogichen<br>
> >> 8 Sean Burford<br>
> >> 8 Rick Farina<br>
> >> 8 Michael Wagner<br>
> >> 8 Eric Allen<br>
> >> 8 Brian Dickman<br>
> >> 7 SASANO Takayoshi<br>
> >> 6 Vernon Mauery<br>
> >> 6 Ron Wellsted<br>
> >> 6 Rhett Robinson<br>
> >> 6 Ray Cielencki<br>
> >> 5 Rick DeWitt<br>
> >> 5 Keith Williamson<br>
> >> 4 Tim Smith<br>
> >> 4 Nicolas Pike<br>
> >> 4 Mathias Weyland<br>
> >> 4 IT2 Stuart Blake Tener, USNR (N3GWG)<br>
> >> 4 David Griffith<br>
> >> 4 Chris Fosnight<br>
> >> 4 Angus Ainslie<br>
> >> 4 Alexey K<br>
> >> 3 Rick Farina<br>
> >> 3 Leo B?rring<br>
> >> 3 Jon K Hellan<br>
> >> 3 Christopher Hoover<br>
> >> 3 Ben Smith<br>
> >> 2 Richard Birch<br>
> >> 2 Nathan Crapo<br>
> >> 2 Michal Demin<br>
> >> 2 Louie Ilievski<br>
> >> 2 Johan Adler<br>
> >> 2 Dean Gibson<br>
> >> 2 Cody P Schafer<br>
> >> 1 Windsor Schmidt<br>
> >> 1 Wade Simmons<br>
> >> 1 Stuart Tener<br>
> >> 1 Steve Conklin<br>
> >> 1 Ryan Tourge K2RRT x<br>
> >> 1 Robert Terzi<br>
> >> 1 Robert Morris<br>
> >> 1 Patrik Nilsson<br>
> >> 1 nytowl<br>
> >> 1 Nolan Darilek<br>
> >> 1 nicolas jon pike<br>
> >> 1 Mike Pittaro<br>
> >> 1 Michal D<br>
> >> 1 Michael Lippold<br>
> >> 1 Mark Adams<br>
> >> 1 <a href="mailto:loudawgucr@gmail.com" target="_blank" rel="noreferrer">loudawgucr@gmail.com</a><br>
> >> 1 Krystian SP6IT<br>
> >> 1 <a href="mailto:kc1ckh@arrl.net" target="_blank" rel="noreferrer">kc1ckh@arrl.net</a><br>
> >> 1 Jeremy McDermond<br>
> >> 1 James Lee N1DDK<br>
> >> 1 Imuli<br>
> >> 1 Eric Dropps<br>
> >> 1 Ed Santiago<br>
> >> 1 Declan Rieb<br>
> >> 1 David Fannin<br>
> >> 1 Dave Allan<br>
> >> 1 Dale Tyler<br>
> >> 1 Charles Stewart<br>
> >> 1 Brett Bump<br>
> >> 1 Brad Ackerman<br>
> >> 1 Attilio Pannella<br>
> >> 1 Andrew<br>
> >> 1 Adam Coddington<br>
> >> 1 ac2lq<br>
> >> 1 Aaron Pelly<br>
> >><br>
> >> ------------------------------<br>
> >><br>
> >><br>
> >> chirp_users mailing list<br>
> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> >> This message was sent to FRANK G at <a href="mailto:k1hlz@pcicon.net" target="_blank" rel="noreferrer">k1hlz@pcicon.net</a><br>
> >> To unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> >><br>
> >><br>
> >> --<br>
> >> Sent from my Android device with K-9 Mail. Please excuse my brevity.<br>
> >><br>
> >> _______________________________________________<br>
> >> chirp_users mailing list<br>
> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> >> This message was sent to Norman Sebern at <a href="mailto:nsebern14@gmail.com" target="_blank" rel="noreferrer">nsebern14@gmail.com</a><br>
> >> To unsubscribe, send an email to<br>
> >> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> >><br>
> >><br>
> >> _______________________________________________<br>
> >> chirp_users mailing list<br>
> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> >> This message was sent to WT at <a href="mailto:wn3lif@gmail.com" target="_blank" rel="noreferrer">wn3lif@gmail.com</a><br>
> >> To unsubscribe, send an email to<br>
> >> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
> >><br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Chuck Hast at <a href="mailto:kp4djt@gmail.com" target="_blank" rel="noreferrer">kp4djt@gmail.com</a><br>
> > To unsubscribe, send an email to<br>
> > <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
><br>
><br>
><br>
> --<br>
> Chirp + Editcp + MD380Tools on Linux<br>
> Celestial!!!<br>
> Chuck -- KP4DJT<br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/4a16ee0c/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180703/4a16ee0c/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 13<br>
> Date: Wed, 4 Jul 2018 06:24:13 -0600<br>
> From: <<a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a>><br>
> Subject: Re: [chirp_users] Chirp began ten years ago today...<br>
> To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <009e01d41391$ed23a970$c76afc50$@<a href="http://elp.rr.com" rel="noreferrer noreferrer" target="_blank">elp.rr.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Congratulations, and thanks for all the hard work. Few will actually<br>
> realize the dedication it takes to do this for 10 years, and without profit.<br>
><br>
> Vy73 ? Mike ? KD5KC<br>
> El Paso, Texas ? DM61rt<br>
><br>
><br>
><br>
> -----Original Message-----<br>
> From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a> <<br>
> <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a>> On Behalf Of Dan Smith<br>
> Sent: Tuesday, July 3, 2018 7:25 AM<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Subject: [chirp_users] Chirp began ten years ago today...<br>
><br>
> Hi all,<br>
><br>
> I just wanted to share a milestone in the CHIRP project with the<br>
> community. Ten years ago today, on July 3rd 2008, I made the first commit<br>
> to the repository which started the chirp project:<br>
><br>
><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb</a><br>
><br>
> It was just a rough bit of code that could talk to an Icom IC-92AD and I<br>
> was apparently thinking of calling it "repidr". I do not recall what that<br>
> was supposed to stand for, but by July 16th I had renamed it to CHIRP:<br>
><br>
><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b</a><br>
><br>
> By July 19th, I was ready to make something available, which was just able<br>
> to read and write CSV files, and talk to Icom IC-9x radios and the ID-800H.<br>
> This was the first version 0.1.1:<br>
><br>
><br>
> <a href="https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7</a><br>
><br>
> I still remember the large stack of paper on the corner of my desk where I<br>
> had written out tons of hex, all in pencil, erased and re-written many<br>
> times, trying to decode the first few radio memories and looking for<br>
> patterns to make it easier.<br>
><br>
> The project has come a long way since then, largely due to the help and<br>
> involvement of other volunteers and users. While the first release<br>
> supported two radio models, the latest one supports 228 distinct models,<br>
> with more if you count the many clones that exist. The users mailing list<br>
> has a fairly amazing 2892 people subscribed, from all over the world,<br>
> representing a tiny fraction of the total user base.<br>
><br>
> So, I just want to thank all the people who have made CHIRP possible and<br>
> successful. Especially contributors of code, bug reports, and test reports,<br>
> but also people who have spent hours on this list helping others and being<br>
> the support system that allows volunteer developers to focus on what they<br>
> do best. Thanks to anyone who has ever sent a donation, as well as the<br>
> commercial outfits who have contributed radios and other help. There are<br>
> too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few<br>
> that come to mind as having a substantial impact.<br>
><br>
> At the end of this email is a very rough list of all the code contributors<br>
> to the project, extracted from the repository with minimal attempts to<br>
> squash some duplicates. These are the rock stars that have gotten us to<br>
> where we are today, so please join me in thanking them for spending their<br>
> nights and weekends making this project the success that it is today!<br>
><br>
> --Dan<br>
><br>
><br>
> Commits Contributor<br>
> -------|--------------------------------------------------<br>
> 1865 Dan Smith<br>
> 240 Jim Unroe<br>
> 189 Tom Hayward<br>
> 188 Marco Filippi<br>
> 137 Zach Welch<br>
> 59 Jens Jensen<br>
> 58 Pavel Milanes (CO7WT)<br>
> 26 K. Arvanitis<br>
> 15 Tyler Tidman<br>
> 12 Richard Cochran<br>
> 10 Dan Drogichen<br>
> 8 Sean Burford<br>
> 8 Rick Farina<br>
> 8 Michael Wagner<br>
> 8 Eric Allen<br>
> 8 Brian Dickman<br>
> 7 SASANO Takayoshi<br>
> 6 Vernon Mauery<br>
> 6 Ron Wellsted<br>
> 6 Rhett Robinson<br>
> 6 Ray Cielencki<br>
> 5 Rick DeWitt<br>
> 5 Keith Williamson<br>
> 4 Tim Smith<br>
> 4 Nicolas Pike<br>
> 4 Mathias Weyland<br>
> 4 IT2 Stuart Blake Tener, USNR (N3GWG)<br>
> 4 David Griffith<br>
> 4 Chris Fosnight<br>
> 4 Angus Ainslie<br>
> 4 Alexey K<br>
> 3 Rick Farina<br>
> 3 Leo B?rring<br>
> 3 Jon K Hellan<br>
> 3 Christopher Hoover<br>
> 3 Ben Smith<br>
> 2 Richard Birch<br>
> 2 Nathan Crapo<br>
> 2 Michal Demin<br>
> 2 Louie Ilievski<br>
> 2 Johan Adler<br>
> 2 Dean Gibson<br>
> 2 Cody P Schafer<br>
> 1 Windsor Schmidt<br>
> 1 Wade Simmons<br>
> 1 Stuart Tener<br>
> 1 Steve Conklin<br>
> 1 Ryan Tourge K2RRT x<br>
> 1 Robert Terzi<br>
> 1 Robert Morris<br>
> 1 Patrik Nilsson<br>
> 1 nytowl<br>
> 1 Nolan Darilek<br>
> 1 nicolas jon pike<br>
> 1 Mike Pittaro<br>
> 1 Michal D<br>
> 1 Michael Lippold<br>
> 1 Mark Adams<br>
> 1 <a href="mailto:loudawgucr@gmail.com" target="_blank" rel="noreferrer">loudawgucr@gmail.com</a><br>
> 1 Krystian SP6IT<br>
> 1 <a href="mailto:kc1ckh@arrl.net" target="_blank" rel="noreferrer">kc1ckh@arrl.net</a><br>
> 1 Jeremy McDermond<br>
> 1 James Lee N1DDK<br>
> 1 Imuli<br>
> 1 Eric Dropps<br>
> 1 Ed Santiago<br>
> 1 Declan Rieb<br>
> 1 David Fannin<br>
> 1 Dave Allan<br>
> 1 Dale Tyler<br>
> 1 Charles Stewart<br>
> 1 Brett Bump<br>
> 1 Brad Ackerman<br>
> 1 Attilio Pannella<br>
> 1 Andrew<br>
> 1 Adam Coddington<br>
> 1 ac2lq<br>
> 1 Aaron Pelly<br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> This message was sent to <a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a> at <a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a> To<br>
> unsubscribe, send an email to<br>
> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
><br>
><br>
><br>
> ------------------------------<br>
><br>
> Message: 14<br>
> Date: Wed, 4 Jul 2018 07:48:57 -0500<br>
> From: Dennis Wage <<a href="mailto:dwage@dwage.com" target="_blank" rel="noreferrer">dwage@dwage.com</a>><br>
> Subject: Re: [chirp_users] Chirp began ten years ago today...<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<br>
> <a href="mailto:CAE1d061W%2BAKz-b5bv%2B5yKMzAAEH-5Fo_400e69OH4YjPBhAndA@mail.gmail.com" target="_blank" rel="noreferrer">CAE1d061W+AKz-b5bv+5yKMzAAEH-5Fo_400e69OH4YjPBhAndA@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> Don't be that guy. Donate now here:<br>
> <a href="https://chirp.danplanet.com/projects/chirp/wiki/Download" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/wiki/Download</a><br>
><br>
> Dennis M. Wage (W9BOQ)<br>
><br>
> 245 Corum Hill Road<br>
> Castalian Springs, TN 37031<br>
> (615) 310-4242 Cell<br>
> (615) 562-5128 Home<br>
> <a href="http://hammondb3organ.net" rel="noreferrer noreferrer" target="_blank">http://hammondb3organ.net</a><br>
> <a href="http://overdubs.net" rel="noreferrer noreferrer" target="_blank">http://overdubs.net</a><br>
><br>
> On Wed, Jul 4, 2018 at 7:24 AM, <<a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a>> wrote:<br>
><br>
> > Congratulations, and thanks for all the hard work. Few will actually<br>
> > realize the dedication it takes to do this for 10 years, and without<br>
> profit.<br>
> ><br>
> > Vy73 ? Mike ? KD5KC<br>
> > El Paso, Texas ? DM61rt<br>
> ><br>
> ><br>
> ><br>
> > -----Original Message-----<br>
> > From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a> <<br>
> > <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users-bounces@intrepid.danplanet.com</a>> On Behalf Of Dan Smith<br>
> > Sent: Tuesday, July 3, 2018 7:25 AM<br>
> > To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> > Subject: [chirp_users] Chirp began ten years ago today...<br>
> ><br>
> > Hi all,<br>
> ><br>
> > I just wanted to share a milestone in the CHIRP project with the<br>
> > community. Ten years ago today, on July 3rd 2008, I made the first commit<br>
> > to the repository which started the chirp project:<br>
> ><br>
> > <a href="https://chirp.danplanet.com/projects/chirp/repository/" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/</a><br>
> > revisions/31cfb1a376fb<br>
> ><br>
> > It was just a rough bit of code that could talk to an Icom IC-92AD and I<br>
> > was apparently thinking of calling it "repidr". I do not recall what that<br>
> > was supposed to stand for, but by July 16th I had renamed it to CHIRP:<br>
> ><br>
> > <a href="https://chirp.danplanet.com/projects/chirp/repository/" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/</a><br>
> > revisions/646c121a847b<br>
> ><br>
> > By July 19th, I was ready to make something available, which was just<br>
> able<br>
> > to read and write CSV files, and talk to Icom IC-9x radios and the<br>
> ID-800H.<br>
> > This was the first version 0.1.1:<br>
> ><br>
> > <a href="https://chirp.danplanet.com/projects/chirp/repository/" rel="noreferrer noreferrer" target="_blank">https://chirp.danplanet.com/projects/chirp/repository/</a><br>
> > revisions/1428729c41b7<br>
> ><br>
> > I still remember the large stack of paper on the corner of my desk where<br>
> I<br>
> > had written out tons of hex, all in pencil, erased and re-written many<br>
> > times, trying to decode the first few radio memories and looking for<br>
> > patterns to make it easier.<br>
> ><br>
> > The project has come a long way since then, largely due to the help and<br>
> > involvement of other volunteers and users. While the first release<br>
> > supported two radio models, the latest one supports 228 distinct models,<br>
> > with more if you count the many clones that exist. The users mailing list<br>
> > has a fairly amazing 2892 people subscribed, from all over the world,<br>
> > representing a tiny fraction of the total user base.<br>
> ><br>
> > So, I just want to thank all the people who have made CHIRP possible and<br>
> > successful. Especially contributors of code, bug reports, and test<br>
> reports,<br>
> > but also people who have spent hours on this list helping others and<br>
> being<br>
> > the support system that allows volunteer developers to focus on what they<br>
> > do best. Thanks to anyone who has ever sent a donation, as well as the<br>
> > commercial outfits who have contributed radios and other help. There are<br>
> > too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few<br>
> > that come to mind as having a substantial impact.<br>
> ><br>
> > At the end of this email is a very rough list of all the code<br>
> contributors<br>
> > to the project, extracted from the repository with minimal attempts to<br>
> > squash some duplicates. These are the rock stars that have gotten us to<br>
> > where we are today, so please join me in thanking them for spending their<br>
> > nights and weekends making this project the success that it is today!<br>
> ><br>
> > --Dan<br>
> ><br>
> ><br>
> > Commits Contributor<br>
> > -------|--------------------------------------------------<br>
> > 1865 Dan Smith<br>
> > 240 Jim Unroe<br>
> > 189 Tom Hayward<br>
> > 188 Marco Filippi<br>
> > 137 Zach Welch<br>
> > 59 Jens Jensen<br>
> > 58 Pavel Milanes (CO7WT)<br>
> > 26 K. Arvanitis<br>
> > 15 Tyler Tidman<br>
> > 12 Richard Cochran<br>
> > 10 Dan Drogichen<br>
> > 8 Sean Burford<br>
> > 8 Rick Farina<br>
> > 8 Michael Wagner<br>
> > 8 Eric Allen<br>
> > 8 Brian Dickman<br>
> > 7 SASANO Takayoshi<br>
> > 6 Vernon Mauery<br>
> > 6 Ron Wellsted<br>
> > 6 Rhett Robinson<br>
> > 6 Ray Cielencki<br>
> > 5 Rick DeWitt<br>
> > 5 Keith Williamson<br>
> > 4 Tim Smith<br>
> > 4 Nicolas Pike<br>
> > 4 Mathias Weyland<br>
> > 4 IT2 Stuart Blake Tener, USNR (N3GWG)<br>
> > 4 David Griffith<br>
> > 4 Chris Fosnight<br>
> > 4 Angus Ainslie<br>
> > 4 Alexey K<br>
> > 3 Rick Farina<br>
> > 3 Leo B?rring<br>
> > 3 Jon K Hellan<br>
> > 3 Christopher Hoover<br>
> > 3 Ben Smith<br>
> > 2 Richard Birch<br>
> > 2 Nathan Crapo<br>
> > 2 Michal Demin<br>
> > 2 Louie Ilievski<br>
> > 2 Johan Adler<br>
> > 2 Dean Gibson<br>
> > 2 Cody P Schafer<br>
> > 1 Windsor Schmidt<br>
> > 1 Wade Simmons<br>
> > 1 Stuart Tener<br>
> > 1 Steve Conklin<br>
> > 1 Ryan Tourge K2RRT x<br>
> > 1 Robert Terzi<br>
> > 1 Robert Morris<br>
> > 1 Patrik Nilsson<br>
> > 1 nytowl<br>
> > 1 Nolan Darilek<br>
> > 1 nicolas jon pike<br>
> > 1 Mike Pittaro<br>
> > 1 Michal D<br>
> > 1 Michael Lippold<br>
> > 1 Mark Adams<br>
> > 1 <a href="mailto:loudawgucr@gmail.com" target="_blank" rel="noreferrer">loudawgucr@gmail.com</a><br>
> > 1 Krystian SP6IT<br>
> > 1 <a href="mailto:kc1ckh@arrl.net" target="_blank" rel="noreferrer">kc1ckh@arrl.net</a><br>
> > 1 Jeremy McDermond<br>
> > 1 James Lee N1DDK<br>
> > 1 Imuli<br>
> > 1 Eric Dropps<br>
> > 1 Ed Santiago<br>
> > 1 Declan Rieb<br>
> > 1 David Fannin<br>
> > 1 Dave Allan<br>
> > 1 Dale Tyler<br>
> > 1 Charles Stewart<br>
> > 1 Brett Bump<br>
> > 1 Brad Ackerman<br>
> > 1 Attilio Pannella<br>
> > 1 Andrew<br>
> > 1 Adam Coddington<br>
> > 1 ac2lq<br>
> > 1 Aaron Pelly<br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to <a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a> at <a href="mailto:mike-2007@elp.rr.com" target="_blank" rel="noreferrer">mike-2007@elp.rr.com</a> To<br>
> > unsubscribe, send an email to chirp_users-unsubscribe@<br>
> > <a href="http://intrepid.danplanet.com" rel="noreferrer noreferrer" target="_blank">intrepid.danplanet.com</a><br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> > This message was sent to Dennis Wage at <a href="mailto:dwage@dwage.com" target="_blank" rel="noreferrer">dwage@dwage.com</a><br>
> > To unsubscribe, send an email to chirp_users-unsubscribe@<br>
> > <a href="http://intrepid.danplanet.com" rel="noreferrer noreferrer" target="_blank">intrepid.danplanet.com</a><br>
> ><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/4c16af16/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/4c16af16/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 15<br>
> Date: Wed, 04 Jul 2018 10:48:54 -0300<br>
> From: <a href="mailto:survivor@cryptolab.net" target="_blank" rel="noreferrer">survivor@cryptolab.net</a><br>
> Subject: [chirp_users] How to empty or null tone channel in Chirp?<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a><br>
> Message-ID: <<a href="mailto:d8d337ecd37909ed5276af33628b3181@cryptolab.net" target="_blank" rel="noreferrer">d8d337ecd37909ed5276af33628b3181@cryptolab.net</a>><br>
> Content-Type: text/plain; charset="us-ascii"<br>
><br>
> When I use Chirp to set radio channels, there are many columns I cannot<br>
> let empty, unless I cannot save it or uploat to radio. Most repeaters<br>
> here have no subtone and I cannot let tone column empty, or null or<br>
> zero. In chirp, there is a preseted tone list from 67.0 to 254.1. When I<br>
> power on the transceiver in frequency mode and ajust to repeater<br>
> channel, I can hear people talking normally. When I power on in channel<br>
> mode and choose the respective channel with the same frequency, I cannot<br>
> hear people talking. Pearhaps, tone values are wrong and in most cases<br>
> they are unnecessary. How to I solve this?<br>
> I have a Baofeng UV-82 WITH 8 Watts (HP).<br>
> Firmware<br>
> 3 KEY: N822413<br>
> 6 KEY: 140902N<br>
><br>
> TKS<br>
><br>
> PU4YOU<br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/290ff6da/attachment-0001.html" rel="noreferrer noreferrer" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20180704/290ff6da/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 16<br>
> Date: Wed, 4 Jul 2018 09:06:29 -0500<br>
> From: Dennis Wage <<a href="mailto:dwage@dwage.com" target="_blank" rel="noreferrer">dwage@dwage.com</a>><br>
> Subject: Re: [chirp_users] How to empty or null tone channel in Chirp?<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank" rel="noreferrer">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <CAE1d062sy4JN0ySc=<br>
> <a href="mailto:5EH0yfu_w10HzbxEm52hqG7Ju%2Bn4Ph-5A@mail.gmail.com" target="_blank" rel="noreferrer">5EH0yfu_w10HzbxEm52hqG7Ju+n4Ph-5A@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="utf-8"<br>
><br>
> You should be able to leave the "TONE" column empty, which means the values<br>
> in rToneFreq, cToneFreq will be ignored. And like you said those columns<br>
> cannot be empty. If you do leave them empty, Chirp by default will add 88.5<br>
> as extraneous data that will be ignored.<br>
><br>
> Hope this helps.<br>
><br>
> DW<br>
><br>
><br>
> Dennis M. Wage (W9BOQ)<br>
><br>
> 245 Corum Hill Road<br>
> Castalian Springs, TN 37031<br>
> (615) 310-4242 Cell<br>
> (615) 562-5128 Home<br>
> <a href="http://hammondb3organ.net" rel="noreferrer noreferrer" target="_blank">http://hammondb3organ.net</a><br>
> <a href="http://overdubs.net" rel="noreferrer noreferrer" target="_blank">http://overdubs.net</a><br>
><br>
> On Wed, Jul 4, 2018 at 8:48 AM, <<a href="mailto:survivor@cryptolab.net" target="_blank" rel="noreferrer">survivor@cryptolab.net</a>> wrote:<br>
><br>
> ><br>
> > When I use Chirp to set radio channels, there are many columns I cannot<br>
> > let empty, unless I cannot save it or uploat to radio. Most repeaters<br>
> here<br>
> > have no subtone and I cannot let tone column empty, or null or zero. In<br>
> > chirp, there is a preseted tone list from 67.0 to 254.1. When I power on<br>
> > the transceiver in frequency mode and ajust to repeater channel, I can<br>
> hear<br>
> > people talking normally. When I power on in channel mode and choose the<br>
> > respective channel with the same frequency, I cannot hear people talking.<br>
> > Pearhaps, tone values are wrong and in most cases they are unnecessary.<br>
> How<br>
> > to I solve this?<br>
> > I have a Baofeng UV-82 WITH 8 Watts (HP).<br>
> > Firmwar</blockquote></div>