<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Hi Gene, <br>
</p>
<p>Kenwood TK-372G Driver author here.</p>
<p>There are some kind of USB-TTL adapters that are picky about
cloning this Kenwood Family, please try this:</p>
<ul>
<li>Use a real Serial port if possible (the ones in the back of
the PC)</li>
<li>If you use a USB adapter try <b>NOT to use it on a USB 3.0</b>
port or a USB hub.</li>
<li>If none of this above works, try a different USB-Serial
Adapter. (if your interface allow it)<br>
</li>
<li>If all this don't work, please test the USB-serial + program
interface with the OEM software to check it's working ok. <br>
</li>
</ul>
<p>You described that the radio is getting the PC signal (it shows
-PC- in the display) and the log shows that the radio didn't
accept the PROGRAM command after trying 10 times...</p>
<p>In my experience some USB-TTL adapters just don't work with this
radios (but yes with others, like the Feidaxin FD268A or the
Baofengs) I suspect about the USB-serial chip sets or USB driver
not keeping up with the requirements of the radio.</p>
<p>In this case the radio is passing to program mode and answering
back but the PC seems to have a lag or not in sync with the
answer... <br>
</p>
<p>Culprit?: who knows... chipset... driver...
python-serial+driver...</p>
<p>In any case I'm willing to resolve that issue, please test the
proposed curse of action and report back.</p>
<p>Cheers, Pavel, CO7WT.<br>
</p>
<br>
<div class="moz-cite-prefix">El 11/05/18 a las 02:12, Gene Vincent
escribió:<br>
</div>
<blockquote type="cite"
cite="mid:CAEAGfVDvKVQ=qu-E4sBxL6oXNh_AO64BqzmkeosW2_-rqLjung@mail.gmail.com">
<div dir="ltr">I have a Kenwood 372G (1). The radio shows - PC-
and CHIRP seems to indicate everything is going smooth
(cloning) until the very end. The radios are for work and I only
want to leave commercial frequencies in it.
<div><br>
</div>
<div>I guess I haven't figured out how to report an issue, so
bear with me for posting here.</div>
<div><br>
</div>
<div>The debug file is attached. The errors above the one in the
subject got corrected and can be ignored, I think.</div>
<div><br>
</div>
<div>Thanks.</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
chirp_users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a class="moz-txt-link-freetext" href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to M.Sc. Pavel Milanes Costa at <a class="moz-txt-link-abbreviated" href="mailto:pavelmc@gmail.com">pavelmc@gmail.com</a>
To unsubscribe, send an email to <a class="moz-txt-link-abbreviated" href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a></pre>
</blockquote>
<br>
</body>
</html>