<div dir="auto">I have just heard about Win 10 S intended for schools and seniors which is crippled to only run MS approved apps. Might this be the problem? <div dir="auto">Fred VA6FFM</div></div><div class="gmail_extra"><br><div class="gmail_quote">On May 23, 2017 8:17 AM, "Bob Boehme" <<a href="mailto:w2iri@cox.net">w2iri@cox.net</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div lang="EN-US" link="blue" vlink="purple"><div class="m_-6401658913239624747WordSection1"><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">One way I found that has been great is to use a raspberry pi.. They now have a 7 inch display that bolts into a case with the pi and a lithium battery which means you can make it completely portable .. I’ve had not problems programming all of my radios with the pi.. <u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><div style="border:none;border-top:solid #b5c4df 1.0pt;padding:3.0pt 0in 0in 0in"><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@intrepid.<wbr>danplanet.com</a> [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@<wbr>intrepid.danplanet.com</a>] <b>On Behalf Of </b>Stuart Rauh<br><b>Sent:</b> Tuesday, May 23, 2017 6:22 AM<br><b>To:</b> roland kelts; Discussion of CHIRP<br><b>Subject:</b> Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20<u></u><u></u></span></p></div><p class="MsoNormal"><u></u> <u></u></p><div><p class="MsoNormal">I have had absolutely no trouble with Windows 10 and Chirp. Works great!<u></u><u></u></p></div><div><p class="MsoNormal"><br clear="all"><u></u><u></u></p><div><div><div><p class="MsoNormal">Stuart Rauh<u></u><u></u></p></div><div><p class="MsoNormal"><a href="mailto:Stuart@Rauhnet.com" target="_blank">Stuart@Rauhnet.com</a><u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div></div></div><p class="MsoNormal"><u></u> <u></u></p><div><p class="MsoNormal">On Mon, May 22, 2017 at 9:20 PM, roland kelts via chirp_users <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>> wrote:<u></u><u></u></p><p class="MsoNormal">people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!!<br>------------------------------<wbr>--------------<br>On Sun, 5/21/17, <<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.<wbr>danplanet.com</a>> wrote:<br><br> Subject: chirp_users Digest, Vol 101, Issue 20<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> Date: Sunday, May 21, 2017, 12:00 PM<br><br> Send chirp_users mailing list submissions to<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br><br> To subscribe or unsubscribe via the<br> World Wide Web, visit<br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> or, via email, send a message with<br> subject or body 'help' to<br> <a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.<wbr>danplanet.com</a><br><br> You can reach the person managing the<br> list at<br> <a href="mailto:chirp_users-owner@intrepid.danplanet.com" target="_blank">chirp_users-owner@intrepid.<wbr>danplanet.com</a><br><br> When replying, please edit your Subject<br> line so it is more specific<br> than "Re: Contents of chirp_users<br> digest..."<br><br><br> Today's Topics:<br><br> 1. Re: Cannot read Baofeng<br> BF-888S (Jim Unroe)<br> 2. Re: Leixen VV-898E on MacOS?<br> (was: ...daily-20170501<br> repeatable crash)<br> (Rich Baker)<br> 3. Re: Cannot read Baofeng<br> BF-888S (Rich Baker)<br> 4. Re: Leixen VV-898E on MacOS?<br> (was: ...daily-20170501<br> repeatable crash)<br> (Jardy Dawson)<br> 5. Re: Cannot read Baofeng<br> BF-888S (Jardy Dawson)<br> 6. Re: Cannot read Baofeng<br> BF-888S (Jim McCorison)<br> 7. Re: Leixen VV-898E on MacOS?<br> (was: ...daily-20170501<br> repeatable crash)<br> (Rich Baker)<br> 8. Re: Cannot read Baofeng<br> BF-888S (Rich Baker)<br> 9. Re: Cannot read Baofeng<br> BF-888S (Jim McCorison)<br> 10. FT2D (NNN Wx)<br> 11. Re: chirp_users Digest, Vol<br> 101, Issue 19 (Bob Decker)<br> 12. Re: chirp_users Digest, Vol<br> 101, Issue 19 (Carrie Jackson)<br> 13. Re: Cannot read Baofeng<br> BF-888S (Joe Puma)<br> 14. Re: Cannot read Baofeng<br> BF-888S (Joe Puma)<br><br><br> -----------------------------<wbr>------------------------------<wbr>-----------<br><br> Message: 1<br> Date: Sat, 20 May 2017 15:36:37 -0400<br> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> <br> <CADnO8U4_wsaCLet=nu=<wbr>0a90pNzdt=<a href="mailto:DQc%2Bi7v0b_A_xXK9CTowA@mail.gmail.com" target="_blank">DQc+i7v0b_A_<wbr>xXK9CTowA@mail.gmail.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> On Sat, May 20, 2017 at 11:08 AM, Herb<br> Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> wrote:<br> > I have been fighting similar<br> problems on Win10 on my Baofeng UV-5R+. I too<br> > rolled back the driver to 3.2.0.0<br> to get my "genuine" cable that I purchase<br> > from HRO to work once I upgraded<br> to Win10. It worked fine on Win7 and never<br> > had a problem with the latest<br> driver but would not work on Win10 till I<br> > rolled the driver back. I<br> then turned off the auto driver updates for this<br> > device. Everything worked<br> fine after rolling the driver back.<br> ><br> > A few months later when I tried to<br> read the radio again, it would not<br> > connect. I checked the<br> driver and it was still the 3.2.0.0 driver in my<br> > listing. It took me several<br> days till I updated the driver to the latest<br> > driver which of course did not<br> work, but when I rolled it back again the<br> > 3.2.0.0 driver from the pick list<br> for this device, it began to work again.<br> > Don't ask me what is going on but<br> then set it back for auto updates. I will<br> > now just roll the driver back<br> every time I want to use this cable.<br> ><br> > I suggest you try to update your<br> driver and then roll it back again to<br> > 3.2.0.0 to see if that works for<br> you. I know it sounds stupid but it is<br> > worth a try since it worked for<br> me.<br> ><br> ><br> > Herb, KB7UVC<br> > NW APRS Group, West Sound<br> Coordinator<br> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br><br> There is no need to disable updates. If<br> Windows does update your<br> Prolific driver, the previous driver is<br> still installed. All you have<br> to do is go into Device Manager and<br> re-select the driver version that<br> you want to use. I keep several<br> Prolific driver versions installed and<br> switch between then at will for testing<br> purposes.<br><br> Jim KC9HI<br> -------------- next part<br> --------------<br> A non-text attachment was scrubbed...<br> Name: ProlificDrivers2.jpg<br> Type: image/jpeg<br> Size: 161541 bytes<br> Desc: not available<br> Url : <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40ab39a9/attachment-0001.jpg" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/40ab39a9/<wbr>attachment-0001.jpg</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 2<br> Date: Sat, 20 May 2017 17:58:49 -0400<br> From: Rich Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> Subject: Re: [chirp_users] Leixen<br> VV-898E on MacOS? (was:<br> ...daily-20170501<br> repeatable crash)<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> <<a href="mailto:CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng@mail.gmail.com" target="_blank">CAELWbPHggmTKrpxz-nTzfz-<wbr>m2RxrEts0WSatBGaV3zZMA6V1ng@<wbr>mail.gmail.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> Unsubscribe me from this list NOW.<br><br> On Sat, May 20, 2017 at 1:59 PM, Steve<br> Sergeant <<a href="mailto:stevesgt@effable.com" target="_blank">stevesgt@effable.com</a>><br> wrote:<br><br> > Just to ping the group again:<br> ><br> > Has anybody out there had recent<br> luck programming the Leixen VV-898E<br> > using a recent build of Chirp on<br> MacOS?<br> ><br> ><br> ><br> > On 5/2/17 0:08 AM, Steve Sergeant<br> wrote:<br> > > I just installed<br> chirp-daily-20170501.app to try. I am attempting to<br> > > copy setups from one Leixen<br> VV-898E radio into several others.<br> > ><br> > > However, a fraction of a<br> second after the screen fills with the data<br> > > from the radio, Chirp<br> unexpectedly quits, and I'm given the opportunity<br> > > to send a report to Apple.<br> > ><br> > > My system is:<br> > ><br> > > Macbook Air 11"<br> (MacBookAir6,1)<br> > > MacOS X 10.11.6 (15G1421)<br> > > 4GB RAM<br> > ><br> > > The last line in<br> .chirp/debug.log reads:<br> > ><br> /Users/username/Applications/<wbr>chirp-daily-20170501.app/<br> ><br> Contents/MacOS/../Resources/<wbr>chirp/chirpw:143:<br> > > PangoWarning: Invalid UTF-8<br> string passed to pango_layout_set_text()<br> > > gtk.main()<br> > ><br> > > I'm using the<br> osx-pl2303-installer.pkg for my serial driver. This is<br> > > currently the only radio for<br> which I have a programming cable.<br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Rich at<br> <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> > To unsubscribe, send an email to<br> chirp_users-unsubscribe@<br> > <a href="http://intrepid.danplanet.com" target="_blank">intrepid.danplanet.com</a><br> ><br><br><br><br> --<br> S. Richard Baker<br> 250 Furnace Dock Road<br> Cortlandt Manor, NY 10567<br><br> Home: <a href="tel:914-736-1350" target="_blank">914-736-1350</a><br> Cell: <a href="tel:917-922-2463" target="_blank">917-922-2463</a><br> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00d7f0f7/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/00d7f0f7/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 3<br> Date: Sat, 20 May 2017 17:59:05 -0400<br> From: Rich Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> <<a href="mailto:CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ@mail.gmail.com" target="_blank">CAELWbPEYTesu5jWmSHgqmF70N6Mr<wbr>jqCZfYx0GmpYybU4fz4iQQ@mail.<wbr>gmail.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> Unsubscribe me from this list NOW.<br><br> On Sat, May 20, 2017 at 3:36 PM, Jim<br> Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> wrote:<br><br> > On Sat, May 20, 2017 at 11:08 AM,<br> Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> > wrote:<br> > > I have been fighting similar<br> problems on Win10 on my Baofeng UV-5R+. I<br> > too<br> > > rolled back the driver to<br> 3.2.0.0 to get my "genuine" cable that I<br> > purchase<br> > > from HRO to work once I<br> upgraded to Win10. It worked fine on Win7 and<br> > never<br> > > had a problem with the latest<br> driver but would not work on Win10 till I<br> > > rolled the driver back. <br> I then turned off the auto driver updates for<br> > this<br> > > device. Everything<br> worked fine after rolling the driver back.<br> > ><br> > > A few months later when I<br> tried to read the radio again, it would not<br> > > connect. I checked the<br> driver and it was still the 3.2.0.0 driver in my<br> > > listing. It took me<br> several days till I updated the driver to the latest<br> > > driver which of course did<br> not work, but when I rolled it back again the<br> > > 3.2.0.0 driver from the pick<br> list for this device, it began to work<br> > again.<br> > > Don't ask me what is going on<br> but then set it back for auto updates. I<br> > will<br> > > now just roll the driver back<br> every time I want to use this cable.<br> > ><br> > > I suggest you try to update<br> your driver and then roll it back again to<br> > > 3.2.0.0 to see if that works<br> for you. I know it sounds stupid but it is<br> > > worth a try since it worked<br> for me.<br> > ><br> > ><br> > > Herb, KB7UVC<br> > > NW APRS Group, West Sound<br> Coordinator<br> > > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br> ><br> > There is no need to disable<br> updates. If Windows does update your<br> > Prolific driver, the previous<br> driver is still installed. All you have<br> > to do is go into Device Manager<br> and re-select the driver version that<br> > you want to use. I keep several<br> Prolific driver versions installed and<br> > switch between then at will for<br> testing purposes.<br> ><br> > Jim KC9HI<br> ><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Rich at<br> <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> > To unsubscribe, send an email to<br> chirp_users-unsubscribe@<br> > <a href="http://intrepid.danplanet.com" target="_blank">intrepid.danplanet.com</a><br> ><br><br><br><br> --<br> S. Richard Baker<br> 250 Furnace Dock Road<br> Cortlandt Manor, NY 10567<br><br> Home: <a href="tel:914-736-1350" target="_blank">914-736-1350</a><br> Cell: <a href="tel:917-922-2463" target="_blank">917-922-2463</a><br> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3ef22303/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/3ef22303/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 4<br> Date: Sat, 20 May 2017 15:06:24 -0700<br> From: Jardy Dawson <<a href="mailto:jardy72@yahoo.com" target="_blank">jardy72@yahoo.com</a>><br> Subject: Re: [chirp_users] Leixen<br> VV-898E on MacOS? (was:<br> <br> ...daily-20170501 repeatable crash)<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <<a href="mailto:E64697DE-5BA1-4595-AC56-99B0663E9B06@yahoo.com" target="_blank">E64697DE-5BA1-4595-AC56-<wbr>99B0663E9B06@yahoo.com</a>><br> Content-Type: text/plain;<br> charset="us-ascii"<br><br> You have to do that yourself by READING<br> THE LINKS AT THE BOTTOM OF EACH EMAIL.<br><br> Jardy Dawson<br> WA7JRD Ham Radio<br><br> Message relayed from secret Hillary<br> Clinton server, located in the basement of her house. <br> OOPS, you aren't supposed to know that!<br><br> On May 20, 2017, at 14:58, Rich Baker<br> <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br><br> Unsubscribe me from this list<br> NOW. <br><br> > On Sat, May 20, 2017 at 1:59 PM,<br> Steve Sergeant <<a href="mailto:stevesgt@effable.com" target="_blank">stevesgt@effable.com</a>><br> wrote:<br> > Just to ping the group again:<br> ><br> > Has anybody out there had recent<br> luck programming the Leixen VV-898E<br> > using a recent build of Chirp on<br> MacOS?<br> ><br> ><br> ><br> > On 5/2/17 0:08 AM, Steve Sergeant<br> wrote:<br> > > I just installed<br> chirp-daily-20170501.app to try. I am attempting to<br> > > copy setups from one Leixen<br> VV-898E radio into several others.<br> > ><br> > > However, a fraction of a<br> second after the screen fills with the data<br> > > from the radio, Chirp<br> unexpectedly quits, and I'm given the opportunity<br> > > to send a report to Apple.<br> > ><br> > > My system is:<br> > ><br> > > Macbook Air 11"<br> (MacBookAir6,1)<br> > > MacOS X 10.11.6 (15G1421)<br> > > 4GB RAM<br> > ><br> > > The last line in<br> .chirp/debug.log reads:<br> > ><br> /Users/username/Applications/<wbr>chirp-daily-20170501.app/<wbr>Contents/MacOS/../Resources/<wbr>chirp/chirpw:143:<br> > > PangoWarning: Invalid UTF-8<br> string passed to pango_layout_set_text()<br> > > gtk.main()<br> > ><br> > > I'm using the<br> osx-pl2303-installer.pkg for my serial driver. This is<br> > > currently the only radio for<br> which I have a programming cable.<br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Rich at<br> <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> > To unsubscribe, send an email to<br> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br><br><br><br> --<br> S. Richard Baker<br> 250 Furnace Dock Road<br> Cortlandt Manor, NY 10567<br><br> Home: <a href="tel:914-736-1350" target="_blank">914-736-1350</a><br> Cell: <a href="tel:917-922-2463" target="_blank">917-922-2463</a><br> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> _____________________________<wbr>__________________<br> chirp_users mailing list<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a><br> This message was sent to Jardy at <a href="mailto:jardy72@yahoo.com" target="_blank">jardy72@yahoo.com</a><br> To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/7bfa552d/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/7bfa552d/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 5<br> Date: Sat, 20 May 2017 15:07:04 -0700<br> From: Jardy Dawson <<a href="mailto:jardy72@yahoo.com" target="_blank">jardy72@yahoo.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <<a href="mailto:DA466B25-CD12-4633-B731-5B3B12630FC0@yahoo.com" target="_blank">DA466B25-CD12-4633-B731-<wbr>5B3B12630FC0@yahoo.com</a>><br> Content-Type: text/plain;<br> charset="us-ascii"<br><br> Unsub yourself.<br><br> Jardy Dawson<br> WA7JRD Ham Radio<br><br> Message relayed from secret Hillary<br> Clinton server, located in the basement of her house. <br> OOPS, you aren't supposed to know that!<br><br> On May 20, 2017, at 14:59, Rich Baker<br> <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br><br> Unsubscribe me from this list<br> NOW. <br><br> > On Sat, May 20, 2017 at 3:36 PM,<br> Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> wrote:<br> > On Sat, May 20, 2017 at 11:08 AM,<br> Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> wrote:<br> > > I have been fighting similar<br> problems on Win10 on my Baofeng UV-5R+. I too<br> > > rolled back the driver to<br> 3.2.0.0 to get my "genuine" cable that I purchase<br> > > from HRO to work once I<br> upgraded to Win10. It worked fine on Win7 and never<br> > > had a problem with the latest<br> driver but would not work on Win10 till I<br> > > rolled the driver back. <br> I then turned off the auto driver updates for this<br> > > device. Everything<br> worked fine after rolling the driver back.<br> > ><br> > > A few months later when I<br> tried to read the radio again, it would not<br> > > connect. I checked the<br> driver and it was still the 3.2.0.0 driver in my<br> > > listing. It took me<br> several days till I updated the driver to the latest<br> > > driver which of course did<br> not work, but when I rolled it back again the<br> > > 3.2.0.0 driver from the pick<br> list for this device, it began to work again.<br> > > Don't ask me what is going on<br> but then set it back for auto updates. I will<br> > > now just roll the driver back<br> every time I want to use this cable.<br> > ><br> > > I suggest you try to update<br> your driver and then roll it back again to<br> > > 3.2.0.0 to see if that works<br> for you. I know it sounds stupid but it is<br> > > worth a try since it worked<br> for me.<br> > ><br> > ><br> > > Herb, KB7UVC<br> > > NW APRS Group, West Sound<br> Coordinator<br> > > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br> ><br> > There is no need to disable<br> updates. If Windows does update your<br> > Prolific driver, the previous<br> driver is still installed. All you have<br> > to do is go into Device Manager<br> and re-select the driver version that<br> > you want to use. I keep several<br> Prolific driver versions installed and<br> > switch between then at will for<br> testing purposes.<br> ><br> > Jim KC9HI<br> ><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Rich at<br> <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> > To unsubscribe, send an email to<br> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br><br><br><br> --<br> S. Richard Baker<br> 250 Furnace Dock Road<br> Cortlandt Manor, NY 10567<br><br> Home: <a href="tel:914-736-1350" target="_blank">914-736-1350</a><br> Cell: <a href="tel:917-922-2463" target="_blank">917-922-2463</a><br> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> _____________________________<wbr>__________________<br> chirp_users mailing list<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a><br> This message was sent to Jardy at <a href="mailto:jardy72@yahoo.com" target="_blank">jardy72@yahoo.com</a><br> To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ef1b4428/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/ef1b4428/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 6<br> Date: Sat, 20 May 2017 15:06:24 -0700<br> From: Jim McCorison <<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <<a href="mailto:3E9DA26F-DC85-4AA2-9A7E-AF109E11437C@mccorison.com" target="_blank">3E9DA26F-DC85-4AA2-9A7E-<wbr>AF109E11437C@mccorison.com</a>><br> Content-Type: text/plain;<br> charset="us-ascii"<br><br> Wow! What a polite request. I just<br> can't try and help you fast enough.<br><br> Not.<br><br> Jim McCorison<br> Orcas Island, WA<br><br> > On May 20, 2017, at 2:59 PM, Rich<br> Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br> ><br> > Unsubscribe me from this list<br> NOW. <br> ><br> >> On Sat, May 20, 2017 at 3:36<br> PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> wrote:<br> >> On Sat, May 20, 2017 at 11:08<br> AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> wrote:<br> >> > I have been fighting<br> similar problems on Win10 on my Baofeng UV-5R+. I too<br> >> > rolled back the driver to<br> 3.2.0.0 to get my "genuine" cable that I purchase<br> >> > from HRO to work once I<br> upgraded to Win10. It worked fine on Win7 and never<br> >> > had a problem with the<br> latest driver but would not work on Win10 till I<br> >> > rolled the driver<br> back. I then turned off the auto driver updates for<br> this<br> >> > device. Everything<br> worked fine after rolling the driver back.<br> >> ><br> >> > A few months later when I<br> tried to read the radio again, it would not<br> >> > connect. I checked<br> the driver and it was still the 3.2.0.0 driver in my<br> >> > listing. It took me<br> several days till I updated the driver to the latest<br> >> > driver which of course<br> did not work, but when I rolled it back again the<br> >> > 3.2.0.0 driver from the<br> pick list for this device, it began to work again.<br> >> > Don't ask me what is<br> going on but then set it back for auto updates. I<br> will<br> >> > now just roll the driver<br> back every time I want to use this cable.<br> >> ><br> >> > I suggest you try to<br> update your driver and then roll it back again to<br> >> > 3.2.0.0 to see if that<br> works for you. I know it sounds stupid but it is<br> >> > worth a try since it<br> worked for me.<br> >> ><br> >> ><br> >> > Herb, KB7UVC<br> >> > NW APRS Group, West Sound<br> Coordinator<br> >> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br> >><br> >> There is no need to disable<br> updates. If Windows does update your<br> >> Prolific driver, the previous<br> driver is still installed. All you have<br> >> to do is go into Device<br> Manager and re-select the driver version that<br> >> you want to use. I keep<br> several Prolific driver versions installed and<br> >> switch between then at will<br> for testing purposes.<br> >><br> >> Jim KC9HI<br> >><br> >><br> _____________________________<wbr>__________________<br> >> chirp_users mailing list<br> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> >> This message was sent to Rich<br> at <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> >> To unsubscribe, send an email<br> to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> ><br> ><br> ><br> > --<br> > S. Richard Baker<br> > 250 Furnace Dock Road<br> > Cortlandt Manor, NY 10567<br> ><br> > Home: <a href="tel:914-736-1350" target="_blank">914-736-1350</a><br> > Cell: <a href="tel:917-922-2463" target="_blank">917-922-2463</a><br> > Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to K2SON at<br> <a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a><br> > To unsubscribe, send an email to<br> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/4f76cc98/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/4f76cc98/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 7<br> Date: Sat, 20 May 2017 19:29:42 -0400<br> From: Rich Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> Subject: Re: [chirp_users] Leixen<br> VV-898E on MacOS? (was:<br> ...daily-20170501<br> repeatable crash)<br> To: Jardy Dawson <<a href="mailto:jardy72@yahoo.com" target="_blank">jardy72@yahoo.com</a>>,<br> Discussion of CHIRP<br> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> <br> <<wbr>CAELWbPGOpWuJE5WYt0n8CN9u8q9+<wbr>PzH5swHspN+D6J=<a href="mailto:zBNbSFg@mail.gmail.com" target="_blank">zBNbSFg@mail.<wbr>gmail.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> I have done that over 10 times<br> now. It does not work.<br><br> On Sat, May 20, 2017 at 6:06 PM, Jardy<br> Dawson via chirp_users <<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> wrote:<br><br> > You have to do that yourself by<br> READING THE LINKS AT THE BOTTOM OF EACH<br> > EMAIL.<br> ><br> > Jardy Dawson<br> > WA7JRD Ham Radio<br> ><br> > Message relayed from secret<br> Hillary Clinton server, located in the<br> > basement of her house. OOPS,<br> you aren't supposed to know that!<br> ><br> > On May 20, 2017, at 14:58, Rich<br> Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br> ><br> > Unsubscribe me from this list<br> NOW.<br> ><br> > On Sat, May 20, 2017 at 1:59 PM,<br> Steve Sergeant <<a href="mailto:stevesgt@effable.com" target="_blank">stevesgt@effable.com</a>><br> > wrote:<br> ><br> >> Just to ping the group again:<br> >><br> >> Has anybody out there had<br> recent luck programming the Leixen VV-898E<br> >> using a recent build of Chirp<br> on MacOS?<br> >><br> >><br> >><br> >> On 5/2/17 0:08 AM, Steve<br> Sergeant wrote:<br> >> > I just installed<br> chirp-daily-20170501.app to try. I am attempting to<br> >> > copy setups from one<br> Leixen VV-898E radio into several others.<br> >> ><br> >> > However, a fraction of a<br> second after the screen fills with the data<br> >> > from the radio, Chirp<br> unexpectedly quits, and I'm given the opportunity<br> >> > to send a report to<br> Apple.<br> >> ><br> >> > My system is:<br> >> ><br> >> > Macbook Air 11"<br> (MacBookAir6,1)<br> >> > MacOS X 10.11.6<br> (15G1421)<br> >> > 4GB RAM<br> >> ><br> >> > The last line in<br> .chirp/debug.log reads:<br> >> ><br> /Users/username/Applications/<wbr>chirp-daily-20170501.app/<wbr>Conten<br> >><br> ts/MacOS/../Resources/chirp/<wbr>chirpw:143:<br> >> > PangoWarning: Invalid<br> UTF-8 string passed to pango_layout_set_text()<br> >> > gtk.main()<br> >> ><br> >> > I'm using the<br> osx-pl2303-installer.pkg for my serial driver. This is<br> >> > currently the only radio<br> for which I have a programming cable.<br> >><br> _____________________________<wbr>__________________<br> >> chirp_users mailing list<br> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> >> This message was sent to Rich<br> at <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> >> To unsubscribe, send an email<br> to chirp_users-unsubscribe@intrep<br> >> <a href="http://id.danplanet.com" target="_blank">id.danplanet.com</a><br> >><br> ><br> ><br> ><br> > --<br> > S. Richard Baker<br> > 250 Furnace Dock Road<br> > Cortlandt Manor, NY 10567<br> ><br> > Home: <a href="tel:914-736-1350" target="_blank">914-736-1350</a><br> <(914)%20736-1350><br> > Cell: <a href="tel:917-922-2463" target="_blank">917-922-2463</a><br> <(917)%20922-2463><br> > Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Jardy at<br> <a href="mailto:jardy72@yahoo.com" target="_blank">jardy72@yahoo.com</a><br> > To unsubscribe, send an email to<br> chirp_users-unsubscribe@<br> > <a href="http://intrepid.danplanet.com" target="_blank">intrepid.danplanet.com</a><br> ><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Rich at<br> <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> > To unsubscribe, send an email to<br> chirp_users-unsubscribe@<br> > <a href="http://intrepid.danplanet.com" target="_blank">intrepid.danplanet.com</a><br> ><br><br><br><br> --<br> S. Richard Baker<br> 250 Furnace Dock Road<br> Cortlandt Manor, NY 10567<br><br> Home: 914-736-1350<br> Cell: 917-922-2463<br> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/b15c20c7/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/b15c20c7/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 8<br> Date: Sat, 20 May 2017 19:30:55 -0400<br> From: Rich Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> <br> <CAELWbPGYBw51s9AL8BoZuUighp_<wbr>aUj05Dfj_vL9ZWKyqidhp=<a href="mailto:Q@mail.gmail.com" target="_blank">Q@mail.<wbr>gmail.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> Tried to unsubscribe over 10 times both<br> on the website and by sending<br> emails.<br><br> On Sat, May 20, 2017 at 6:06 PM, Jim<br> McCorison <<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a>><br> wrote:<br><br> > Wow! What a polite request. I just<br> can't try and help you fast enough.<br> ><br> > Not.<br> ><br> > Jim McCorison<br> > Orcas Island, WA<br> ><br> > On May 20, 2017, at 2:59 PM, Rich<br> Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br> ><br> > Unsubscribe me from this list<br> NOW.<br> ><br> > On Sat, May 20, 2017 at 3:36 PM,<br> Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> wrote:<br> ><br> >> On Sat, May 20, 2017 at 11:08<br> AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> >> wrote:<br> >> > I have been fighting<br> similar problems on Win10 on my Baofeng UV-5R+. I<br> >> too<br> >> > rolled back the driver to<br> 3.2.0.0 to get my "genuine" cable that I<br> >> purchase<br> >> > from HRO to work once I<br> upgraded to Win10. It worked fine on Win7 and<br> >> never<br> >> > had a problem with the<br> latest driver but would not work on Win10 till I<br> >> > rolled the driver<br> back. I then turned off the auto driver updates for<br> >> this<br> >> > device. Everything<br> worked fine after rolling the driver back.<br> >> ><br> >> > A few months later when I<br> tried to read the radio again, it would not<br> >> > connect. I checked<br> the driver and it was still the 3.2.0.0 driver in my<br> >> > listing. It took me<br> several days till I updated the driver to the<br> >> latest<br> >> > driver which of course<br> did not work, but when I rolled it back again the<br> >> > 3.2.0.0 driver from the<br> pick list for this device, it began to work<br> >> again.<br> >> > Don't ask me what is<br> going on but then set it back for auto updates. I<br> >> will<br> >> > now just roll the driver<br> back every time I want to use this cable.<br> >> ><br> >> > I suggest you try to<br> update your driver and then roll it back again to<br> >> > 3.2.0.0 to see if that<br> works for you. I know it sounds stupid but it is<br> >> > worth a try since it<br> worked for me.<br> >> ><br> >> ><br> >> > Herb, KB7UVC<br> >> > NW APRS Group, West Sound<br> Coordinator<br> >> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br> >><br> >> There is no need to disable<br> updates. If Windows does update your<br> >> Prolific driver, the previous<br> driver is still installed. All you have<br> >> to do is go into Device<br> Manager and re-select the driver version that<br> >> you want to use. I keep<br> several Prolific driver versions installed and<br> >> switch between then at will<br> for testing purposes.<br> >><br> >> Jim KC9HI<br> >><br> >><br> _____________________________<wbr>__________________<br> >> chirp_users mailing list<br> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> >> This message was sent to Rich<br> at <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> >> To unsubscribe, send an email<br> to chirp_users-unsubscribe@intrep<br> >> <a href="http://id.danplanet.com" target="_blank">id.danplanet.com</a><br> >><br> ><br> ><br> ><br> > --<br> > S. Richard Baker<br> > 250 Furnace Dock Road<br> > Cortlandt Manor, NY 10567<br> ><br> > Home: 914-736-1350<br> <(914)%20736-1350><br> > Cell: 917-922-2463<br> <(917)%20922-2463><br> > Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> ><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to K2SON at<br> <a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a><br> > To unsubscribe, send an email to<br> chirp_users-unsubscribe@<br> > <a href="http://intrepid.danplanet.com" target="_blank">intrepid.danplanet.com</a><br> ><br> ><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Rich at<br> <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> > To unsubscribe, send an email to<br> chirp_users-unsubscribe@<br> > <a href="http://intrepid.danplanet.com" target="_blank">intrepid.danplanet.com</a><br> ><br><br><br><br> --<br> S. Richard Baker<br> 250 Furnace Dock Road<br> Cortlandt Manor, NY 10567<br><br> Home: 914-736-1350<br> Cell: 917-922-2463<br> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/70cc1511/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/70cc1511/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 9<br> Date: Sat, 20 May 2017 18:03:34 -0700<br> From: Jim McCorison <<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <<a href="mailto:20885233-494D-4BE4-B06E-CDBE22B4C2BF@mccorison.com" target="_blank">20885233-494D-4BE4-B06E-<wbr>CDBE22B4C2BF@mccorison.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> Perhaps it you reached out with a<br> polite request along the lines of ?I?m having problems<br> unsubscribing from this list. I?ve sent an unsubscribe<br> request email without success and I?ve tried the website<br> without success. Does any body have any ideas what I?m doing<br> wrong?? Bonus points for sending it as a separate thread<br> with s subject of something like ?Need help. Problems<br> unsubscribing." Such an inquiry will probably get you a lot<br> more assistance than just throwing a grenade into the<br> mailing list.<br><br> ---<br> Jim McCorison<br> Orcas Island, WA<br><br><br><br> > On May 20, 2017, at 4:30 PM, Rich<br> Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br> ><br> > Tried to unsubscribe over 10 times<br> both on the website and by sending emails.<br> ><br> > On Sat, May 20, 2017 at 6:06 PM,<br> Jim McCorison <<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a><br> <mailto:<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a>><wbr>><br> wrote:<br> > Wow! What a polite request. I just<br> can't try and help you fast enough.<br> ><br> > Not.<br> ><br> > Jim McCorison<br> > Orcas Island, WA<br> ><br> > On May 20, 2017, at 2:59 PM, Rich<br> Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> <mailto:<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>>><br> wrote:<br> ><br> >> Unsubscribe me from this list<br> NOW. <br> >><br> >> On Sat, May 20, 2017 at 3:36<br> PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a><br> <mailto:<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><wbr>><br> wrote:<br> >> On Sat, May 20, 2017 at 11:08<br> AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a><br> <mailto:<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.<wbr>com</a>>><br> wrote:<br> >> > I have been fighting<br> similar problems on Win10 on my Baofeng UV-5R+. I too<br> >> > rolled back the driver to<br> 3.2.0.0 to get my "genuine" cable that I purchase<br> >> > from HRO to work once I<br> upgraded to Win10. It worked fine on Win7 and never<br> >> > had a problem with the<br> latest driver but would not work on Win10 till I<br> >> > rolled the driver<br> back. I then turned off the auto driver updates for<br> this<br> >> > device. Everything<br> worked fine after rolling the driver back.<br> >> ><br> >> > A few months later when I<br> tried to read the radio again, it would not<br> >> > connect. I checked<br> the driver and it was still the 3.2.0.0 driver in my<br> >> > listing. It took me<br> several days till I updated the driver to the latest<br> >> > driver which of course<br> did not work, but when I rolled it back again the<br> >> > 3.2.0.0 driver from the<br> pick list for this device, it began to work again.<br> >> > Don't ask me what is<br> going on but then set it back for auto updates. I<br> will<br> >> > now just roll the driver<br> back every time I want to use this cable.<br> >> ><br> >> > I suggest you try to<br> update your driver and then roll it back again to<br> >> > 3.2.0.0 to see if that<br> works for you. I know it sounds stupid but it is<br> >> > worth a try since it<br> worked for me.<br> >> ><br> >> ><br> >> > Herb, KB7UVC<br> >> > NW APRS Group, West Sound<br> Coordinator<br> >> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a> <<a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a>><br> >><br> >> There is no need to disable<br> updates. If Windows does update your<br> >> Prolific driver, the previous<br> driver is still installed. All you have<br> >> to do is go into Device<br> Manager and re-select the driver version that<br> >> you want to use. I keep<br> several Prolific driver versions installed and<br> >> switch between then at will<br> for testing purposes.<br> >><br> >> Jim KC9HI<br> >><br> >><br> _____________________________<wbr>__________________<br> >> chirp_users mailing list<br> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <mailto:<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> <<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br> >> This message was sent to Rich<br> at <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> <mailto:<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> >> To unsubscribe, send an email<br> to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> <mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br> >><br> >><br> >><br> >> --<br> >> S. Richard Baker<br> >> 250 Furnace Dock Road<br> >> Cortlandt Manor, NY 10567<br> >><br> >> Home: 914-736-1350<br> <<a href="tel:(914)%20736-1350" target="_blank">tel:(914)%20736-1350</a>><br> >> Cell: <br> 917-922-2463 <<a href="tel:(917)%20922-2463" target="_blank">tel:(917)%20922-2463</a>><br> >> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> <mailto:<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>>___<wbr>______________________________<wbr>______________<br> >> chirp_users mailing list<br> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <mailto:<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> <<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br> >> This message was sent to K2SON<br> at <a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a><br> <mailto:<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a>><br> >> To unsubscribe, send an email<br> to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> <mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <mailto:<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> <<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br> > This message was sent to Rich at<br> <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> <mailto:<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> > To unsubscribe, send an email to<br> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> <mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br> ><br> ><br> ><br> > --<br> > S. Richard Baker<br> > 250 Furnace Dock Road<br> > Cortlandt Manor, NY 10567<br> ><br> > Home: 914-736-1350<br> > Cell: 917-922-2463<br> > Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> <mailto:<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>>___<wbr>______________________________<wbr>______________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <mailto:<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> <<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br> > This message was sent to K2SON at<br> <a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a><br> <mailto:<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a>><br> > To unsubscribe, send an email to<br> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> <mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/049c5d1b/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/049c5d1b/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 10<br> Date: Sat, 20 May 2017 19:40:49 -0600<br> From: NNN Wx <<a href="mailto:nthreewx@gmail.com" target="_blank">nthreewx@gmail.com</a>><br> Subject: [chirp_users] FT2D<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> Message-ID: <<a href="mailto:EB99DD23-C6B9-482B-AC28-220025DC2B3B@gmail.com" target="_blank">EB99DD23-C6B9-482B-AC28-<wbr>220025DC2B3B@gmail.com</a>><br> Content-Type: text/plain;<br> charset=utf-8<br><br> I see ?bug? numbers 3325 and 3257 from<br> last year, hoping support for Yaesu FT2D radio will work.<br> It?s in the wish list, and doesn?t seem to need hardware for<br> testing.<br> I?m interested in getting chirp to<br> work, and for some insights into how to get the serial<br> connection to work on Macintosh OS X 10.12.5.<br><br> HOW CAN I HELP (assuming this<br> just needs effort)??<br><br> -----------------------------<wbr>-<br><br> Message: 11<br> Date: Sun, 21 May 2017 02:25:30 +0000<br> (UTC)<br> From: Bob Decker <<a href="mailto:k7bd@yahoo.com" target="_blank">k7bd@yahoo.com</a>><br> Subject: Re: [chirp_users] chirp_users<br> Digest, Vol 101, Issue 19<br> To: "<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>"<br> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <<a href="mailto:1930811399.2660365.1495333530472@mail.yahoo.com" target="_blank">1930811399.2660365.<wbr>1495333530472@mail.yahoo.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> Your method of removal from list did<br> not work. I must cut back mailwh9ch I do not use.? Remove my<br> address. The only other way to remove youre-mail by listing<br> it as spam.ThanksBob<br> <br><br> On Saturday, May 20, 2017<br> 12:00 PM, "<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.<wbr>danplanet.com</a>"<br> <<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@<wbr>intrepid.danplanet.com</a>><br> wrote:<br><br><br> Send chirp_users mailing list<br> submissions to<br> ??? <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br><br> To subscribe or unsubscribe via the<br> World Wide Web, visit<br> ??? <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> or, via email, send a message with<br> subject or body 'help' to<br> ??? <a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.<wbr>danplanet.com</a><br><br> You can reach the person managing the<br> list at<br> ??? <a href="mailto:chirp_users-owner@intrepid.danplanet.com" target="_blank">chirp_users-owner@intrepid.<wbr>danplanet.com</a><br><br> When replying, please edit your Subject<br> line so it is more specific<br> than "Re: Contents of chirp_users<br> digest..."<br><br><br> Today's Topics:<br><br> ? 1. RepeaterBook Proximety Not<br> Accurate? (John Kobeck)<br> ? 2. Re: RepeaterBook Proximety Not<br> Accurate? (Jim Unroe)<br> ? 3. Re: Cannot read Baofeng BF-888S<br> (Herb Gerhardt)<br> ? 4. Re: Cannot read Baofeng BF-888S<br> (Amnon Zohar)<br> ? 5. Re: Cannot read Baofeng BF-888S<br> (Glenn At Home)<br> ? 6. Leixen VV-898E on MacOS? (was:<br> ...daily-20170501??? repeatable<br> ? ? ? crash) (Steve Sergeant)<br><br><br> -----------------------------<wbr>------------------------------<wbr>-----------<br><br> Message: 1<br> Date: Fri, 19 May 2017 23:04:47 -0400<br> From: John Kobeck <<a href="mailto:johnkobeck@me.com" target="_blank">johnkobeck@me.com</a>><br> Subject: [chirp_users] RepeaterBook<br> Proximety Not Accurate?<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> Message-ID: <<a href="mailto:5F40902E-156A-415A-B687-A0118642A496@me.com" target="_blank">5F40902E-156A-415A-B687-<wbr>A0118642A496@me.com</a>><br> Content-Type: text/plain;<br> charset=utf-8<br><br><br> Hello Chirpers;<br><br> I have a question. I am trying to<br> program repeaters into a Kenwood TMV7. I have been using<br> RepeaterBooks Proximity search. When setting a Manhattan?<br> zip code for example, it doesn?t seem to matter if I<br> indicate a 100 mile radius or a 300 mile radius. It only<br> seems pull about a 15 miles radius. Is there a default that<br> won?t allow a larger range?<br><br> 73s<br> KC2MPG<br><br> -----------------------------<wbr>-<br><br> Message: 2<br> Date: Sat, 20 May 2017 05:48:35 -0400<br> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> Subject: Re: [chirp_users] RepeaterBook<br> Proximety Not Accurate?<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> ???<br> <<a href="mailto:CADnO8U7LPAPZM6s2Y6mtYQd1qz%2Bt%2BQNJR9xDXG_AAX2kbBvqug@mail.gmail.com" target="_blank">CADnO8U7LPAPZM6s2Y6mtYQd1qz+<wbr>t+QNJR9xDXG_AAX2kbBvqug@mail.<wbr>gmail.com</a>><br> Content-Type: text/plain;<br> charset="UTF-8"<br><br> On Fri, May 19, 2017 at 11:04 PM, John<br> Kobeck <<a href="mailto:johnkobeck@me.com" target="_blank">johnkobeck@me.com</a>><br> wrote:<br> ><br> > Hello Chirpers;<br> ><br> > I have a question. I am trying to<br> program repeaters into a Kenwood TMV7. I have been using<br> RepeaterBooks Proximity search. When setting a Manhattan?<br> zip code for example, it doesn?t seem to matter if I<br> indicate a 100 mile radius or a 300 mile radius. It only<br> seems pull about a 15 miles radius. Is there a default that<br> won?t allow a larger range?<br> ><br> > 73s<br> > KC2MPG<br><br> Using "Import from data source",<br> "Location" = 10001 and "Band" = "2<br> meters (144MHz)", I the following<br> numbers of repeaters are retrieved.<br><br> Distance: # of repeaters<br> 15: 50<br> 100: 367<br> 300: 1387<br><br> Jim KC9HI<br><br><br> -----------------------------<wbr>-<br><br> Message: 3<br> Date: Sat, 20 May 2017 08:08:14 -0700<br> From: "Herb Gerhardt" <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> <001301d2d17a$e7936ea0$<wbr>b6ba4be0$@com><br> Content-Type: text/plain;???<br> charset="us-ascii"<br><br> I have been fighting similar problems<br> on Win10 on my Baofeng UV-5R+.? I too<br> rolled back the driver to 3.2.0.0 to<br> get my "genuine" cable that I purchase<br> from HRO to work once I upgraded to<br> Win10.? It worked fine on Win7 and never<br> had a problem with the latest driver<br> but would not work on Win10 till I<br> rolled the driver back.? I then turned<br> off the auto driver updates for this<br> device.? Everything worked fine after<br> rolling the driver back.<br><br> A few months later when I tried to read<br> the radio again, it would not<br> connect.? I checked the driver and it<br> was still the 3.2.0.0 driver in my<br> listing.? It took me several days till<br> I updated the driver to the latest<br> driver which of course did not work,<br> but when I rolled it back again the<br> 3.2.0.0 driver from the pick list for<br> this device, it began to work again.<br> Don't ask me what is going on but then<br> set it back for auto updates.? I will<br> now just roll the driver back every<br> time I want to use this cable.<br><br> I suggest you try to update your driver<br> and then roll it back again to<br> 3.2.0.0 to see if that works for you.?<br> I know it sounds stupid but it is<br> worth a try since it worked for me.<br><br><br> Herb, KB7UVC<br> NW APRS Group, West Sound Coordinator<br> Our WEB Site:? <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br><br><br><br><br><br> -----Original Message-----<br> From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@intrepid.<wbr>danplanet.com</a><br> [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@<wbr>intrepid.danplanet.com</a>]<br> On Behalf Of YT9TP -<br> Pedja<br> Sent: Friday, May 19, 2017 1:08 AM<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> Subject: [chirp_users] Cannot read<br> Baofeng BF-888S<br><br> I have strange issue with Windows 10,<br> prolific serial adapter and BF-888S.<br> It reports unable to download from<br> radio.<br><br> Driver is proper (version 3.2.0.0,<br> update is disabled), and Chirp works fine<br> with the same adapter and other radio<br> (Baofeng UV-B5) reading and writing.<br><br> I tried four different BF-888S and<br> neither can be read.<br><br> However, when I use the same USB<br> adapter on my old Windows XP computer,<br> Chirp easily reads and writes those<br> BF-888S.<br><br> Has anyone met with this problem?<br><br> --<br><br> YT9TP, Pedja<br> <a href="http://www.yt9tp.iz.rs" target="_blank">http://www.yt9tp.iz.rs</a><br><br><br><br> ---<br> This email has been checked for viruses<br> by Avast antivirus software.<br> <a href="https://www.avast.com/antivirus" target="_blank">https://www.avast.com/<wbr>antivirus</a><br><br><br><br> -----------------------------<wbr>-<br><br> Message: 4<br> Date: Sat, 20 May 2017 18:23:30 +0300<br> From: Amnon Zohar <<a href="mailto:amnon.zohar@gmail.com" target="_blank">amnon.zohar@gmail.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> ??? <<a href="mailto:CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A@mail.gmail.com" target="_blank">CAN5HzcQAXwM2rBUjdtwkMCOb7_<wbr>XfsmQ6PgMSqsc5M4B0i19F-A@mail.<wbr>gmail.com</a>><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> I guess some update of win10 change<br> some part of the driver without<br> changing the driver version number.<br> Redowngrading probably fix this. But<br> this just a wild guess. The solution is<br> important. The reason is less<br> important<br><br> ?????? 20 ???? 2017 18:09,? "Herb<br> Gerhardt" <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> ???:<br><br> > I have been fighting similar<br> problems on Win10 on my Baofeng UV-5R+.? I too<br> > rolled back the driver to 3.2.0.0<br> to get my "genuine" cable that I purchase<br> > from HRO to work once I upgraded<br> to Win10.? It worked fine on Win7 and<br> > never<br> > had a problem with the latest<br> driver but would not work on Win10 till I<br> > rolled the driver back.? I then<br> turned off the auto driver updates for this<br> > device.? Everything worked fine<br> after rolling the driver back.<br> ><br> > A few months later when I tried to<br> read the radio again, it would not<br> > connect.? I checked the driver and<br> it was still the 3.2.0.0 driver in my<br> > listing.? It took me several days<br> till I updated the driver to the latest<br> > driver which of course did not<br> work, but when I rolled it back again the<br> > 3.2.0.0 driver from the pick list<br> for this device, it began to work again.<br> > Don't ask me what is going on but<br> then set it back for auto updates.? I<br> > will<br> > now just roll the driver back<br> every time I want to use this cable.<br> ><br> > I suggest you try to update your<br> driver and then roll it back again to<br> > 3.2.0.0 to see if that works for<br> you.? I know it sounds stupid but it is<br> > worth a try since it worked for<br> me.<br> ><br> ><br> > Herb, KB7UVC<br> > NW APRS Group, West Sound<br> Coordinator<br> > Our WEB Site:? <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br> ><br> ><br> ><br> ><br> ><br> > -----Original Message-----<br> > From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@intrepid.<wbr>danplanet.com</a><br> > [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@<wbr>intrepid.danplanet.com</a>]<br> On Behalf Of YT9TP -<br> > Pedja<br> > Sent: Friday, May 19, 2017 1:08<br> AM<br> > To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > Subject: [chirp_users] Cannot read<br> Baofeng BF-888S<br> ><br> > I have strange issue with Windows<br> 10, prolific serial adapter and BF-888S.<br> > It reports unable to download from<br> radio.<br> ><br> > Driver is proper (version 3.2.0.0,<br> update is disabled), and Chirp works<br> > fine<br> > with the same adapter and other<br> radio (Baofeng UV-B5) reading and writing.<br> ><br> > I tried four different BF-888S and<br> neither can be read.<br> ><br> > However, when I use the same USB<br> adapter on my old Windows XP computer,<br> > Chirp easily reads and writes<br> those BF-888S.<br> ><br> > Has anyone met with this problem?<br> ><br> > --<br> ><br> > YT9TP, Pedja<br> > <a href="http://www.yt9tp.iz.rs" target="_blank">http://www.yt9tp.iz.rs</a><br> ><br> ><br> ><br> > ---<br> > This email has been checked for<br> viruses by Avast antivirus software.<br> > <a href="https://www.avast.com/antivirus" target="_blank">https://www.avast.com/<wbr>antivirus</a><br> ><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to amnon at<br> <a href="mailto:amnon.zohar@gmail.com" target="_blank">amnon.zohar@gmail.com</a><br> > To unsubscribe, send an email to<br> chirp_users-unsubscribe@<br> > <a href="http://intrepid.danplanet.com" target="_blank">intrepid.danplanet.com</a><br> ><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ec65c2c2/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/ec65c2c2/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 5<br> Date: Sat, 20 May 2017 11:13:04 -0500<br> From: "Glenn At Home" <<a href="mailto:GlennErvin@cableone.net" target="_blank">GlennErvin@cableone.net</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: "Discussion of CHIRP" <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID:<br> <047601d2d183$f683cf00$<wbr>0601a8c0@NUCPPYH><br> Content-Type: text/plain;<br> charset="utf-8"<br><br> I wonder if you did not reboot windows<br> soon enough to solidify the change.<br> You would think that this would not<br> matter, but maybe Windows needs to reboot for changes such<br> as the driver setting.<br> Glenn<br> I have been fighting similar problems<br> on Win10 on my Baofeng UV-5R+.? I too<br> rolled back the driver to 3.2.0.0 to<br> get my "genuine" cable that I purchase<br> from HRO to work once I upgraded to<br> Win10.? It worked fine on Win7 and never<br> had a problem with the latest driver<br> but would not work on Win10 till I<br> rolled the driver back.? I then turned<br> off the auto driver updates for this<br> device.? Everything worked fine after<br> rolling the driver back.<br><br> A few months later when I tried to read<br> the radio again, it would not<br> connect.? I checked the driver and it<br> was still the 3.2.0.0 driver in my<br> listing.? It took me several days till<br> I updated the driver to the latest<br> driver which of course did not work,<br> but when I rolled it back again the<br> 3.2.0.0 driver from the pick list for<br> this device, it began to work again.<br> Don't ask me what is going on but then<br> set it back for auto updates.? I will<br> now just roll the driver back every<br> time I want to use this cable.<br><br> I suggest you try to update your driver<br> and then roll it back again to<br> 3.2.0.0 to see if that works for you.?<br> I know it sounds stupid but it is<br> worth a try since it worked for me.<br><br><br> Herb, KB7UVC<br> NW APRS Group, West Sound Coordinator<br> Our WEB Site:? <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br><br><br><br><br><br> -----Original Message-----<br> From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@intrepid.<wbr>danplanet.com</a><br> [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com" target="_blank">chirp_users-bounces@<wbr>intrepid.danplanet.com</a>]<br> On Behalf Of YT9TP -<br> Pedja<br> Sent: Friday, May 19, 2017 1:08 AM<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> Subject: [chirp_users] Cannot read<br> Baofeng BF-888S<br><br> I have strange issue with Windows 10,<br> prolific serial adapter and BF-888S.<br> It reports unable to download from<br> radio.<br><br> Driver is proper (version 3.2.0.0,<br> update is disabled), and Chirp works fine<br> with the same adapter and other radio<br> (Baofeng UV-B5) reading and writing.<br><br> I tried four different BF-888S and<br> neither can be read.<br><br> However, when I use the same USB<br> adapter on my old Windows XP computer,<br> Chirp easily reads and writes those<br> BF-888S.<br><br> Has anyone met with this problem?<br><br> --<br><br> YT9TP, Pedja<br> <a href="http://www.yt9tp.iz.rs" target="_blank">http://www.yt9tp.iz.rs</a><br><br><br><br> ---<br> This email has been checked for viruses<br> by Avast antivirus software.<br> <a href="https://www.avast.com/antivirus" target="_blank">https://www.avast.com/<wbr>antivirus</a><br><br> _____________________________<wbr>__________________<br> chirp_users mailing list<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a><br> This message was sent to amnon at <a href="mailto:amnon.zohar@gmail.com" target="_blank">amnon.zohar@gmail.com</a><br> To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br><br><br><br> -----------------------------<wbr>------------------------------<wbr>---------------------<br><br><br> _____________________________<wbr>__________________<br> chirp_users mailing list<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a><br> This message was sent to Glenn at <a href="mailto:glennervin@cableone.net" target="_blank">glennervin@cableone.net</a><br> To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/c0433d81/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/c0433d81/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 6<br> Date: Sat, 20 May 2017 10:59:00 -0700<br> From: Steve Sergeant <<a href="mailto:stevesgt@effable.com" target="_blank">stevesgt@effable.com</a>><br> Subject: [chirp_users] Leixen VV-898E<br> on MacOS? (was:<br> ??? ...daily-20170501??? repeatable<br> crash)<br> To: <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> Message-ID: <<a href="mailto:7623fd03-20f3-5351-6a42-7fc3f405c22a@effable.com" target="_blank">7623fd03-20f3-5351-6a42-<wbr>7fc3f405c22a@effable.com</a>><br> Content-Type: text/plain;<br> charset=utf-8<br><br> Just to ping the group again:<br><br> Has anybody out there had recent luck<br> programming the Leixen VV-898E<br> using a recent build of Chirp on<br> MacOS?<br><br><br><br> On 5/2/17 0:08 AM, Steve Sergeant<br> wrote:<br> > I just installed<br> chirp-daily-20170501.app to try. I am attempting to<br> > copy setups from one Leixen<br> VV-898E radio into several others.<br> ><br> > However, a fraction of a second<br> after the screen fills with the data<br> > from the radio, Chirp unexpectedly<br> quits, and I'm given the opportunity<br> > to send a report to Apple.<br> ><br> > My system is:<br> ><br> > Macbook Air 11" (MacBookAir6,1)<br> > MacOS X 10.11.6 (15G1421)<br> > 4GB RAM<br> ><br> > The last line in .chirp/debug.log<br> reads:<br> ><br> /Users/username/Applications/<wbr>chirp-daily-20170501.app/<wbr>Contents/MacOS/../Resources/<wbr>chirp/chirpw:143:<br> > PangoWarning: Invalid UTF-8 string<br> passed to pango_layout_set_text()<br> >? gtk.main()<br> ><br> > I'm using the<br> osx-pl2303-installer.pkg for my serial driver. This is<br> > currently the only radio for which<br> I have a programming cable.<br><br><br> -----------------------------<wbr>-<br><br> _____________________________<wbr>__________________<br> chirp_users mailing list<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a><br> To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br><br> End of chirp_users Digest, Vol 101,<br> Issue 19<br> *****************************<wbr>***************<br><br><br> <br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/7b6dbd28/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170521/7b6dbd28/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 12<br> Date: Sat, 20 May 2017 21:28:16 -0500<br> From: Carrie Jackson <<a href="mailto:mssjacksonifyournasty@gmail.com" target="_blank">mssjacksonifyournasty@gmail.<wbr>com</a>><br> Subject: Re: [chirp_users] chirp_users<br> Digest, Vol 101, Issue 19<br> To: Bob Decker <<a href="mailto:k7bd@yahoo.com" target="_blank">k7bd@yahoo.com</a>>,<br> Discussion of CHIRP<br> <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <93a354da-a162-4ad8-a2e4-<wbr>25a707fed0f1@Spark><br> Content-Type: text/plain;<br> charset="utf-8"<br><br><br><br> Carrie Jackson liked your e-mail<br><br> Spark by Readdle (<a href="https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_viral" target="_blank">https://itunes.apple.com/app/<wbr>id997102246?mt=8&uo=4&at=<wbr>10l6UJ&ct=Spark_QR_viral</a>)<br><br> Spark by Readdle (<a href="https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_viral" target="_blank">https://itunes.apple.com/app/<wbr>id997102246?mt=8&uo=4&at=<wbr>10l6UJ&ct=Spark_QR_viral</a>)<br><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/1bba98f9/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/1bba98f9/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 13<br> Date: Sun, 21 May 2017 13:58:24 -0400<br> From: Joe Puma <<a href="mailto:theprogramllc@yahoo.com" target="_blank">theprogramllc@yahoo.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <<a href="mailto:762A954A-D894-4632-A374-F805FE65E9A1@yahoo.com" target="_blank">762A954A-D894-4632-A374-<wbr>F805FE65E9A1@yahoo.com</a>><br> Content-Type: text/plain;<br> charset="us-ascii"<br><br> Rich do it yourself. Read bottom of<br> email.<br><br><br> Sent from my iPhone<br><br> > On May 20, 2017, at 5:59 PM, Rich<br> Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br> ><br> > Unsubscribe me from this list<br> NOW. <br> ><br> >> On Sat, May 20, 2017 at 3:36<br> PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> wrote:<br> >> On Sat, May 20, 2017 at 11:08<br> AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> wrote:<br> >> > I have been fighting<br> similar problems on Win10 on my Baofeng UV-5R+. I too<br> >> > rolled back the driver to<br> 3.2.0.0 to get my "genuine" cable that I purchase<br> >> > from HRO to work once I<br> upgraded to Win10. It worked fine on Win7 and never<br> >> > had a problem with the<br> latest driver but would not work on Win10 till I<br> >> > rolled the driver<br> back. I then turned off the auto driver updates for<br> this<br> >> > device. Everything<br> worked fine after rolling the driver back.<br> >> ><br> >> > A few months later when I<br> tried to read the radio again, it would not<br> >> > connect. I checked<br> the driver and it was still the 3.2.0.0 driver in my<br> >> > listing. It took me<br> several days till I updated the driver to the latest<br> >> > driver which of course<br> did not work, but when I rolled it back again the<br> >> > 3.2.0.0 driver from the<br> pick list for this device, it began to work again.<br> >> > Don't ask me what is<br> going on but then set it back for auto updates. I<br> will<br> >> > now just roll the driver<br> back every time I want to use this cable.<br> >> ><br> >> > I suggest you try to<br> update your driver and then roll it back again to<br> >> > 3.2.0.0 to see if that<br> works for you. I know it sounds stupid but it is<br> >> > worth a try since it<br> worked for me.<br> >> ><br> >> ><br> >> > Herb, KB7UVC<br> >> > NW APRS Group, West Sound<br> Coordinator<br> >> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br> >><br> >> There is no need to disable<br> updates. If Windows does update your<br> >> Prolific driver, the previous<br> driver is still installed. All you have<br> >> to do is go into Device<br> Manager and re-select the driver version that<br> >> you want to use. I keep<br> several Prolific driver versions installed and<br> >> switch between then at will<br> for testing purposes.<br> >><br> >> Jim KC9HI<br> >><br> >><br> _____________________________<wbr>__________________<br> >> chirp_users mailing list<br> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> >> This message was sent to Rich<br> at <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> >> To unsubscribe, send an email<br> to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> ><br> ><br> ><br> > --<br> > S. Richard Baker<br> > 250 Furnace Dock Road<br> > Cortlandt Manor, NY 10567<br> ><br> > Home: 914-736-1350<br> > Cell: 917-922-2463<br> > Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Joe Puma<br> at <a href="mailto:theprogramllc@yahoo.com" target="_blank">theprogramllc@yahoo.com</a><br> > To unsubscribe, send an email to<br> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/ec3050d6/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170521/ec3050d6/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> Message: 14<br> Date: Sun, 21 May 2017 13:59:32 -0400<br> From: Joe Puma <<a href="mailto:theprogramllc@yahoo.com" target="_blank">theprogramllc@yahoo.com</a>><br> Subject: Re: [chirp_users] Cannot read<br> Baofeng BF-888S<br> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>><br> Message-ID: <<a href="mailto:9FDE6A55-5F80-439E-AFFE-51E5AF484F0D@yahoo.com" target="_blank">9FDE6A55-5F80-439E-AFFE-<wbr>51E5AF484F0D@yahoo.com</a>><br> Content-Type: text/plain;<br> charset="us-ascii"<br><br> Lol<br><br><br> Sent from my iPhone<br><br> > On May 20, 2017, at 6:06 PM, Jim<br> McCorison <<a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a>><br> wrote:<br> ><br> > Wow! What a polite request. I just<br> can't try and help you fast enough.<br> ><br> > Not.<br> ><br> > Jim McCorison<br> > Orcas Island, WA<br> ><br> >> On May 20, 2017, at 2:59 PM,<br> Rich Baker <<a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a>><br> wrote:<br> >><br> >> Unsubscribe me from this list<br> NOW. <br> >><br> >>> On Sat, May 20, 2017 at<br> 3:36 PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com" target="_blank">rock.unroe@gmail.com</a>><br> wrote:<br> >>> On Sat, May 20, 2017 at<br> 11:08 AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com" target="_blank">hgerhardt@wavecable.com</a>><br> wrote:<br> >>> > I have been fighting<br> similar problems on Win10 on my Baofeng UV-5R+. I too<br> >>> > rolled back the<br> driver to 3.2.0.0 to get my "genuine" cable that I purchase<br> >>> > from HRO to work once<br> I upgraded to Win10. It worked fine on Win7 and never<br> >>> > had a problem with<br> the latest driver but would not work on Win10 till I<br> >>> > rolled the driver<br> back. I then turned off the auto driver updates for<br> this<br> >>> > device. <br> Everything worked fine after rolling the driver back.<br> >>> ><br> >>> > A few months later<br> when I tried to read the radio again, it would not<br> >>> > connect. I<br> checked the driver and it was still the 3.2.0.0 driver in<br> my<br> >>> > listing. It<br> took me several days till I updated the driver to the<br> latest<br> >>> > driver which of<br> course did not work, but when I rolled it back again the<br> >>> > 3.2.0.0 driver from<br> the pick list for this device, it began to work again.<br> >>> > Don't ask me what is<br> going on but then set it back for auto updates. I<br> will<br> >>> > now just roll the<br> driver back every time I want to use this cable.<br> >>> ><br> >>> > I suggest you try to<br> update your driver and then roll it back again to<br> >>> > 3.2.0.0 to see if<br> that works for you. I know it sounds stupid but it is<br> >>> > worth a try since it<br> worked for me.<br> >>> ><br> >>> ><br> >>> > Herb, KB7UVC<br> >>> > NW APRS Group, West<br> Sound Coordinator<br> >>> > Our WEB Site: <br> <a href="http://blog.nwaprs.info/" target="_blank">http://blog.nwaprs.info/</a><br> >>><br> >>> There is no need to<br> disable updates. If Windows does update your<br> >>> Prolific driver, the<br> previous driver is still installed. All you have<br> >>> to do is go into Device<br> Manager and re-select the driver version that<br> >>> you want to use. I keep<br> several Prolific driver versions installed and<br> >>> switch between then at<br> will for testing purposes.<br> >>><br> >>> Jim KC9HI<br> >>><br> >>><br> _____________________________<wbr>__________________<br> >>> chirp_users mailing list<br> >>> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> >>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> >>> This message was sent to<br> Rich at <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> >>> To unsubscribe, send an<br> email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> >><br> >><br> >><br> >> --<br> >> S. Richard Baker<br> >> 250 Furnace Dock Road<br> >> Cortlandt Manor, NY 10567<br> >><br> >> Home: 914-736-1350<br> >> Cell: <br> 917-922-2463<br> >> Email: <a href="mailto:rbakedq@gmail.com" target="_blank">rbakedq@gmail.com</a><br> >><br> _____________________________<wbr>__________________<br> >> chirp_users mailing list<br> >> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> >> This message was sent to K2SON<br> at <a href="mailto:jimmcc@mccorison.com" target="_blank">jimmcc@mccorison.com</a><br> >> To unsubscribe, send an email<br> to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> ><br> _____________________________<wbr>__________________<br> > chirp_users mailing list<br> > <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br> > This message was sent to Joe Puma<br> at <a href="mailto:theprogramllc@yahoo.com" target="_blank">theprogramllc@yahoo.com</a><br> > To unsubscribe, send an email to<br> <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br> -------------- next part<br> --------------<br> An HTML attachment was scrubbed...<br> URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/161a0e09/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170521/161a0e09/<wbr>attachment-0001.html</a><br><br><br> -----------------------------<wbr>-<br><br> _____________________________<wbr>__________________<br> chirp_users mailing list<br> <a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a><br> To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br><br> End of chirp_users Digest, Vol 101,<br> Issue 20<br> *****************************<wbr>***************<br><br>______________________________<wbr>_________________<br>chirp_users mailing list<br><a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br><a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>This message was sent to Stuart Rauh at <a href="mailto:stuart@rauhnet.com" target="_blank">stuart@rauhnet.com</a><br>To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><u></u><u></u></p></div><p class="MsoNormal"><u></u> <u></u></p></div></div></div><br>______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
This message was sent to Fred McDougall VA6FRM at <a href="mailto:frmcdo@gmail.com">frmcdo@gmail.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br></blockquote></div></div>