<div dir="ltr">I have had absolutely no trouble with Windows 10 and Chirp. Works great!</div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div>Stuart Rauh</div><div><a href="mailto:Stuart@Rauhnet.com" target="_blank">Stuart@Rauhnet.com</a></div><div> </div></div></div>
<br><div class="gmail_quote">On Mon, May 22, 2017 at 9:20 PM, roland kelts via chirp_users <span dir="ltr"><<a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.danplanet.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!!<br>
------------------------------<wbr>--------------<br>
On Sun, 5/21/17, <<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.<wbr>danplanet.com</a>> wrote:<br>
<br>
Subject: chirp_users Digest, Vol 101, Issue 20<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
Date: Sunday, May 21, 2017, 12:00 PM<br>
<br>
Send chirp_users mailing list submissions to<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<br>
To subscribe or unsubscribe via the<br>
World Wide Web, visit<br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
or, via email, send a message with<br>
subject or body 'help' to<br>
<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.<wbr>danplanet.com</a><br>
<br>
You can reach the person managing the<br>
list at<br>
<a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.<wbr>danplanet.com</a><br>
<br>
When replying, please edit your Subject<br>
line so it is more specific<br>
than "Re: Contents of chirp_users<br>
digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: Cannot read Baofeng<br>
BF-888S (Jim Unroe)<br>
2. Re: Leixen VV-898E on MacOS?<br>
(was: ...daily-20170501<br>
repeatable crash)<br>
(Rich Baker)<br>
3. Re: Cannot read Baofeng<br>
BF-888S (Rich Baker)<br>
4. Re: Leixen VV-898E on MacOS?<br>
(was: ...daily-20170501<br>
repeatable crash)<br>
(Jardy Dawson)<br>
5. Re: Cannot read Baofeng<br>
BF-888S (Jardy Dawson)<br>
6. Re: Cannot read Baofeng<br>
BF-888S (Jim McCorison)<br>
7. Re: Leixen VV-898E on MacOS?<br>
(was: ...daily-20170501<br>
repeatable crash)<br>
(Rich Baker)<br>
8. Re: Cannot read Baofeng<br>
BF-888S (Rich Baker)<br>
9. Re: Cannot read Baofeng<br>
BF-888S (Jim McCorison)<br>
10. FT2D (NNN Wx)<br>
11. Re: chirp_users Digest, Vol<br>
101, Issue 19 (Bob Decker)<br>
12. Re: chirp_users Digest, Vol<br>
101, Issue 19 (Carrie Jackson)<br>
13. Re: Cannot read Baofeng<br>
BF-888S (Joe Puma)<br>
14. Re: Cannot read Baofeng<br>
BF-888S (Joe Puma)<br>
<br>
<br>
------------------------------<wbr>------------------------------<wbr>----------<br>
<br>
Message: 1<br>
Date: Sat, 20 May 2017 15:36:37 -0400<br>
From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
<br>
<CADnO8U4_wsaCLet=nu=<wbr>0a90pNzdt=<a href="mailto:DQc%2Bi7v0b_A_xXK9CTowA@mail.gmail.com">DQc+i7v0b_A_<wbr>xXK9CTowA@mail.gmail.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
On Sat, May 20, 2017 at 11:08 AM, Herb<br>
Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
wrote:<br>
> I have been fighting similar<br>
problems on Win10 on my Baofeng UV-5R+. I too<br>
> rolled back the driver to 3.2.0.0<br>
to get my "genuine" cable that I purchase<br>
> from HRO to work once I upgraded<br>
to Win10. It worked fine on Win7 and never<br>
> had a problem with the latest<br>
driver but would not work on Win10 till I<br>
> rolled the driver back. I<br>
then turned off the auto driver updates for this<br>
> device. Everything worked<br>
fine after rolling the driver back.<br>
><br>
> A few months later when I tried to<br>
read the radio again, it would not<br>
> connect. I checked the<br>
driver and it was still the 3.2.0.0 driver in my<br>
> listing. It took me several<br>
days till I updated the driver to the latest<br>
> driver which of course did not<br>
work, but when I rolled it back again the<br>
> 3.2.0.0 driver from the pick list<br>
for this device, it began to work again.<br>
> Don't ask me what is going on but<br>
then set it back for auto updates. I will<br>
> now just roll the driver back<br>
every time I want to use this cable.<br>
><br>
> I suggest you try to update your<br>
driver and then roll it back again to<br>
> 3.2.0.0 to see if that works for<br>
you. I know it sounds stupid but it is<br>
> worth a try since it worked for<br>
me.<br>
><br>
><br>
> Herb, KB7UVC<br>
> NW APRS Group, West Sound<br>
Coordinator<br>
> Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
<br>
There is no need to disable updates. If<br>
Windows does update your<br>
Prolific driver, the previous driver is<br>
still installed. All you have<br>
to do is go into Device Manager and<br>
re-select the driver version that<br>
you want to use. I keep several<br>
Prolific driver versions installed and<br>
switch between then at will for testing<br>
purposes.<br>
<br>
Jim KC9HI<br>
-------------- next part<br>
--------------<br>
A non-text attachment was scrubbed...<br>
Name: ProlificDrivers2.jpg<br>
Type: image/jpeg<br>
Size: 161541 bytes<br>
Desc: not available<br>
Url : <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40ab39a9/attachment-0001.jpg" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/40ab39a9/<wbr>attachment-0001.jpg</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sat, 20 May 2017 17:58:49 -0400<br>
From: Rich Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
Subject: Re: [chirp_users] Leixen<br>
VV-898E on MacOS? (was:<br>
...daily-20170501<br>
repeatable crash)<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
<<a href="mailto:CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng@mail.gmail.com">CAELWbPHggmTKrpxz-nTzfz-<wbr>m2RxrEts0WSatBGaV3zZMA6V1ng@<wbr>mail.gmail.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
Unsubscribe me from this list NOW.<br>
<br>
On Sat, May 20, 2017 at 1:59 PM, Steve<br>
Sergeant <<a href="mailto:stevesgt@effable.com">stevesgt@effable.com</a>><br>
wrote:<br>
<br>
> Just to ping the group again:<br>
><br>
> Has anybody out there had recent<br>
luck programming the Leixen VV-898E<br>
> using a recent build of Chirp on<br>
MacOS?<br>
><br>
><br>
><br>
> On 5/2/17 0:08 AM, Steve Sergeant<br>
wrote:<br>
> > I just installed<br>
chirp-daily-20170501.app to try. I am attempting to<br>
> > copy setups from one Leixen<br>
VV-898E radio into several others.<br>
> ><br>
> > However, a fraction of a<br>
second after the screen fills with the data<br>
> > from the radio, Chirp<br>
unexpectedly quits, and I'm given the opportunity<br>
> > to send a report to Apple.<br>
> ><br>
> > My system is:<br>
> ><br>
> > Macbook Air 11"<br>
(MacBookAir6,1)<br>
> > MacOS X 10.11.6 (15G1421)<br>
> > 4GB RAM<br>
> ><br>
> > The last line in<br>
.chirp/debug.log reads:<br>
> ><br>
/Users/username/Applications/<wbr>chirp-daily-20170501.app/<br>
><br>
Contents/MacOS/../Resources/<wbr>chirp/chirpw:143:<br>
> > PangoWarning: Invalid UTF-8<br>
string passed to pango_layout_set_text()<br>
> > gtk.main()<br>
> ><br>
> > I'm using the<br>
osx-pl2303-installer.pkg for my serial driver. This is<br>
> > currently the only radio for<br>
which I have a programming cable.<br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Rich at<br>
<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
> To unsubscribe, send an email to<br>
chirp_users-unsubscribe@<br>
> <a href="http://intrepid.danplanet.com" target="_blank" rel="noreferrer">intrepid.danplanet.com</a><br>
><br>
<br>
<br>
<br>
--<br>
S. Richard Baker<br>
250 Furnace Dock Road<br>
Cortlandt Manor, NY 10567<br>
<br>
Home: <a href="tel:914-736-1350" value="+19147361350">914-736-1350</a><br>
Cell: <a href="tel:917-922-2463" value="+19179222463">917-922-2463</a><br>
Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00d7f0f7/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/00d7f0f7/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Sat, 20 May 2017 17:59:05 -0400<br>
From: Rich Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
<<a href="mailto:CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ@mail.gmail.com">CAELWbPEYTesu5jWmSHgqmF70N6Mr<wbr>jqCZfYx0GmpYybU4fz4iQQ@mail.<wbr>gmail.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
Unsubscribe me from this list NOW.<br>
<br>
On Sat, May 20, 2017 at 3:36 PM, Jim<br>
Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
wrote:<br>
<br>
> On Sat, May 20, 2017 at 11:08 AM,<br>
Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
> wrote:<br>
> > I have been fighting similar<br>
problems on Win10 on my Baofeng UV-5R+. I<br>
> too<br>
> > rolled back the driver to<br>
3.2.0.0 to get my "genuine" cable that I<br>
> purchase<br>
> > from HRO to work once I<br>
upgraded to Win10. It worked fine on Win7 and<br>
> never<br>
> > had a problem with the latest<br>
driver but would not work on Win10 till I<br>
> > rolled the driver back. <br>
I then turned off the auto driver updates for<br>
> this<br>
> > device. Everything<br>
worked fine after rolling the driver back.<br>
> ><br>
> > A few months later when I<br>
tried to read the radio again, it would not<br>
> > connect. I checked the<br>
driver and it was still the 3.2.0.0 driver in my<br>
> > listing. It took me<br>
several days till I updated the driver to the latest<br>
> > driver which of course did<br>
not work, but when I rolled it back again the<br>
> > 3.2.0.0 driver from the pick<br>
list for this device, it began to work<br>
> again.<br>
> > Don't ask me what is going on<br>
but then set it back for auto updates. I<br>
> will<br>
> > now just roll the driver back<br>
every time I want to use this cable.<br>
> ><br>
> > I suggest you try to update<br>
your driver and then roll it back again to<br>
> > 3.2.0.0 to see if that works<br>
for you. I know it sounds stupid but it is<br>
> > worth a try since it worked<br>
for me.<br>
> ><br>
> ><br>
> > Herb, KB7UVC<br>
> > NW APRS Group, West Sound<br>
Coordinator<br>
> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
><br>
> There is no need to disable<br>
updates. If Windows does update your<br>
> Prolific driver, the previous<br>
driver is still installed. All you have<br>
> to do is go into Device Manager<br>
and re-select the driver version that<br>
> you want to use. I keep several<br>
Prolific driver versions installed and<br>
> switch between then at will for<br>
testing purposes.<br>
><br>
> Jim KC9HI<br>
><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Rich at<br>
<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
> To unsubscribe, send an email to<br>
chirp_users-unsubscribe@<br>
> <a href="http://intrepid.danplanet.com" target="_blank" rel="noreferrer">intrepid.danplanet.com</a><br>
><br>
<br>
<br>
<br>
--<br>
S. Richard Baker<br>
250 Furnace Dock Road<br>
Cortlandt Manor, NY 10567<br>
<br>
Home: <a href="tel:914-736-1350" value="+19147361350">914-736-1350</a><br>
Cell: <a href="tel:917-922-2463" value="+19179222463">917-922-2463</a><br>
Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3ef22303/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/3ef22303/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Sat, 20 May 2017 15:06:24 -0700<br>
From: Jardy Dawson <<a href="mailto:jardy72@yahoo.com">jardy72@yahoo.com</a>><br>
Subject: Re: [chirp_users] Leixen<br>
VV-898E on MacOS? (was:<br>
<br>
...daily-20170501 repeatable crash)<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <<a href="mailto:E64697DE-5BA1-4595-AC56-99B0663E9B06@yahoo.com">E64697DE-5BA1-4595-AC56-<wbr>99B0663E9B06@yahoo.com</a>><br>
Content-Type: text/plain;<br>
charset="us-ascii"<br>
<br>
You have to do that yourself by READING<br>
THE LINKS AT THE BOTTOM OF EACH EMAIL.<br>
<br>
Jardy Dawson<br>
WA7JRD Ham Radio<br>
<br>
Message relayed from secret Hillary<br>
Clinton server, located in the basement of her house. <br>
OOPS, you aren't supposed to know that!<br>
<br>
On May 20, 2017, at 14:58, Rich Baker<br>
<<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
<br>
Unsubscribe me from this list<br>
NOW. <br>
<br>
> On Sat, May 20, 2017 at 1:59 PM,<br>
Steve Sergeant <<a href="mailto:stevesgt@effable.com">stevesgt@effable.com</a>><br>
wrote:<br>
> Just to ping the group again:<br>
><br>
> Has anybody out there had recent<br>
luck programming the Leixen VV-898E<br>
> using a recent build of Chirp on<br>
MacOS?<br>
><br>
><br>
><br>
> On 5/2/17 0:08 AM, Steve Sergeant<br>
wrote:<br>
> > I just installed<br>
chirp-daily-20170501.app to try. I am attempting to<br>
> > copy setups from one Leixen<br>
VV-898E radio into several others.<br>
> ><br>
> > However, a fraction of a<br>
second after the screen fills with the data<br>
> > from the radio, Chirp<br>
unexpectedly quits, and I'm given the opportunity<br>
> > to send a report to Apple.<br>
> ><br>
> > My system is:<br>
> ><br>
> > Macbook Air 11"<br>
(MacBookAir6,1)<br>
> > MacOS X 10.11.6 (15G1421)<br>
> > 4GB RAM<br>
> ><br>
> > The last line in<br>
.chirp/debug.log reads:<br>
> ><br>
/Users/username/Applications/<wbr>chirp-daily-20170501.app/<wbr>Contents/MacOS/../Resources/<wbr>chirp/chirpw:143:<br>
> > PangoWarning: Invalid UTF-8<br>
string passed to pango_layout_set_text()<br>
> > gtk.main()<br>
> ><br>
> > I'm using the<br>
osx-pl2303-installer.pkg for my serial driver. This is<br>
> > currently the only radio for<br>
which I have a programming cable.<br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Rich at<br>
<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
> To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<br>
<br>
<br>
--<br>
S. Richard Baker<br>
250 Furnace Dock Road<br>
Cortlandt Manor, NY 10567<br>
<br>
Home: <a href="tel:914-736-1350" value="+19147361350">914-736-1350</a><br>
Cell: <a href="tel:917-922-2463" value="+19179222463">917-922-2463</a><br>
Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
This message was sent to Jardy at <a href="mailto:jardy72@yahoo.com">jardy72@yahoo.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/7bfa552d/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/7bfa552d/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 5<br>
Date: Sat, 20 May 2017 15:07:04 -0700<br>
From: Jardy Dawson <<a href="mailto:jardy72@yahoo.com">jardy72@yahoo.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <<a href="mailto:DA466B25-CD12-4633-B731-5B3B12630FC0@yahoo.com">DA466B25-CD12-4633-B731-<wbr>5B3B12630FC0@yahoo.com</a>><br>
Content-Type: text/plain;<br>
charset="us-ascii"<br>
<br>
Unsub yourself.<br>
<br>
Jardy Dawson<br>
WA7JRD Ham Radio<br>
<br>
Message relayed from secret Hillary<br>
Clinton server, located in the basement of her house. <br>
OOPS, you aren't supposed to know that!<br>
<br>
On May 20, 2017, at 14:59, Rich Baker<br>
<<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
<br>
Unsubscribe me from this list<br>
NOW. <br>
<br>
> On Sat, May 20, 2017 at 3:36 PM,<br>
Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
wrote:<br>
> On Sat, May 20, 2017 at 11:08 AM,<br>
Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
wrote:<br>
> > I have been fighting similar<br>
problems on Win10 on my Baofeng UV-5R+. I too<br>
> > rolled back the driver to<br>
3.2.0.0 to get my "genuine" cable that I purchase<br>
> > from HRO to work once I<br>
upgraded to Win10. It worked fine on Win7 and never<br>
> > had a problem with the latest<br>
driver but would not work on Win10 till I<br>
> > rolled the driver back. <br>
I then turned off the auto driver updates for this<br>
> > device. Everything<br>
worked fine after rolling the driver back.<br>
> ><br>
> > A few months later when I<br>
tried to read the radio again, it would not<br>
> > connect. I checked the<br>
driver and it was still the 3.2.0.0 driver in my<br>
> > listing. It took me<br>
several days till I updated the driver to the latest<br>
> > driver which of course did<br>
not work, but when I rolled it back again the<br>
> > 3.2.0.0 driver from the pick<br>
list for this device, it began to work again.<br>
> > Don't ask me what is going on<br>
but then set it back for auto updates. I will<br>
> > now just roll the driver back<br>
every time I want to use this cable.<br>
> ><br>
> > I suggest you try to update<br>
your driver and then roll it back again to<br>
> > 3.2.0.0 to see if that works<br>
for you. I know it sounds stupid but it is<br>
> > worth a try since it worked<br>
for me.<br>
> ><br>
> ><br>
> > Herb, KB7UVC<br>
> > NW APRS Group, West Sound<br>
Coordinator<br>
> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
><br>
> There is no need to disable<br>
updates. If Windows does update your<br>
> Prolific driver, the previous<br>
driver is still installed. All you have<br>
> to do is go into Device Manager<br>
and re-select the driver version that<br>
> you want to use. I keep several<br>
Prolific driver versions installed and<br>
> switch between then at will for<br>
testing purposes.<br>
><br>
> Jim KC9HI<br>
><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Rich at<br>
<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
> To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<br>
<br>
<br>
--<br>
S. Richard Baker<br>
250 Furnace Dock Road<br>
Cortlandt Manor, NY 10567<br>
<br>
Home: <a href="tel:914-736-1350" value="+19147361350">914-736-1350</a><br>
Cell: <a href="tel:917-922-2463" value="+19179222463">917-922-2463</a><br>
Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
This message was sent to Jardy at <a href="mailto:jardy72@yahoo.com">jardy72@yahoo.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ef1b4428/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/ef1b4428/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 6<br>
Date: Sat, 20 May 2017 15:06:24 -0700<br>
From: Jim McCorison <<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <<a href="mailto:3E9DA26F-DC85-4AA2-9A7E-AF109E11437C@mccorison.com">3E9DA26F-DC85-4AA2-9A7E-<wbr>AF109E11437C@mccorison.com</a>><br>
Content-Type: text/plain;<br>
charset="us-ascii"<br>
<br>
Wow! What a polite request. I just<br>
can't try and help you fast enough.<br>
<br>
Not.<br>
<br>
Jim McCorison<br>
Orcas Island, WA<br>
<br>
> On May 20, 2017, at 2:59 PM, Rich<br>
Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
><br>
> Unsubscribe me from this list<br>
NOW. <br>
><br>
>> On Sat, May 20, 2017 at 3:36<br>
PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
wrote:<br>
>> On Sat, May 20, 2017 at 11:08<br>
AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
wrote:<br>
>> > I have been fighting<br>
similar problems on Win10 on my Baofeng UV-5R+. I too<br>
>> > rolled back the driver to<br>
3.2.0.0 to get my "genuine" cable that I purchase<br>
>> > from HRO to work once I<br>
upgraded to Win10. It worked fine on Win7 and never<br>
>> > had a problem with the<br>
latest driver but would not work on Win10 till I<br>
>> > rolled the driver<br>
back. I then turned off the auto driver updates for<br>
this<br>
>> > device. Everything<br>
worked fine after rolling the driver back.<br>
>> ><br>
>> > A few months later when I<br>
tried to read the radio again, it would not<br>
>> > connect. I checked<br>
the driver and it was still the 3.2.0.0 driver in my<br>
>> > listing. It took me<br>
several days till I updated the driver to the latest<br>
>> > driver which of course<br>
did not work, but when I rolled it back again the<br>
>> > 3.2.0.0 driver from the<br>
pick list for this device, it began to work again.<br>
>> > Don't ask me what is<br>
going on but then set it back for auto updates. I<br>
will<br>
>> > now just roll the driver<br>
back every time I want to use this cable.<br>
>> ><br>
>> > I suggest you try to<br>
update your driver and then roll it back again to<br>
>> > 3.2.0.0 to see if that<br>
works for you. I know it sounds stupid but it is<br>
>> > worth a try since it<br>
worked for me.<br>
>> ><br>
>> ><br>
>> > Herb, KB7UVC<br>
>> > NW APRS Group, West Sound<br>
Coordinator<br>
>> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
>><br>
>> There is no need to disable<br>
updates. If Windows does update your<br>
>> Prolific driver, the previous<br>
driver is still installed. All you have<br>
>> to do is go into Device<br>
Manager and re-select the driver version that<br>
>> you want to use. I keep<br>
several Prolific driver versions installed and<br>
>> switch between then at will<br>
for testing purposes.<br>
>><br>
>> Jim KC9HI<br>
>><br>
>><br>
______________________________<wbr>_________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
>> This message was sent to Rich<br>
at <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
>> To unsubscribe, send an email<br>
to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
><br>
><br>
><br>
> --<br>
> S. Richard Baker<br>
> 250 Furnace Dock Road<br>
> Cortlandt Manor, NY 10567<br>
><br>
> Home: <a href="tel:914-736-1350" value="+19147361350">914-736-1350</a><br>
> Cell: <a href="tel:917-922-2463" value="+19179222463">917-922-2463</a><br>
> Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to K2SON at<br>
<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a><br>
> To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/4f76cc98/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/4f76cc98/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 7<br>
Date: Sat, 20 May 2017 19:29:42 -0400<br>
From: Rich Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
Subject: Re: [chirp_users] Leixen<br>
VV-898E on MacOS? (was:<br>
...daily-20170501<br>
repeatable crash)<br>
To: Jardy Dawson <<a href="mailto:jardy72@yahoo.com">jardy72@yahoo.com</a>>,<br>
Discussion of CHIRP<br>
<<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
<br>
<CAELWbPGOpWuJE5WYt0n8CN9u8q9+<wbr>PzH5swHspN+D6J=<a href="mailto:zBNbSFg@mail.gmail.com">zBNbSFg@mail.<wbr>gmail.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
I have done that over 10 times<br>
now. It does not work.<br>
<br>
On Sat, May 20, 2017 at 6:06 PM, Jardy<br>
Dawson via chirp_users <<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
wrote:<br>
<br>
> You have to do that yourself by<br>
READING THE LINKS AT THE BOTTOM OF EACH<br>
> EMAIL.<br>
><br>
> Jardy Dawson<br>
> WA7JRD Ham Radio<br>
><br>
> Message relayed from secret<br>
Hillary Clinton server, located in the<br>
> basement of her house. OOPS,<br>
you aren't supposed to know that!<br>
><br>
> On May 20, 2017, at 14:58, Rich<br>
Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
><br>
> Unsubscribe me from this list<br>
NOW.<br>
><br>
> On Sat, May 20, 2017 at 1:59 PM,<br>
Steve Sergeant <<a href="mailto:stevesgt@effable.com">stevesgt@effable.com</a>><br>
> wrote:<br>
><br>
>> Just to ping the group again:<br>
>><br>
>> Has anybody out there had<br>
recent luck programming the Leixen VV-898E<br>
>> using a recent build of Chirp<br>
on MacOS?<br>
>><br>
>><br>
>><br>
>> On 5/2/17 0:08 AM, Steve<br>
Sergeant wrote:<br>
>> > I just installed<br>
chirp-daily-20170501.app to try. I am attempting to<br>
>> > copy setups from one<br>
Leixen VV-898E radio into several others.<br>
>> ><br>
>> > However, a fraction of a<br>
second after the screen fills with the data<br>
>> > from the radio, Chirp<br>
unexpectedly quits, and I'm given the opportunity<br>
>> > to send a report to<br>
Apple.<br>
>> ><br>
>> > My system is:<br>
>> ><br>
>> > Macbook Air 11"<br>
(MacBookAir6,1)<br>
>> > MacOS X 10.11.6<br>
(15G1421)<br>
>> > 4GB RAM<br>
>> ><br>
>> > The last line in<br>
.chirp/debug.log reads:<br>
>> ><br>
/Users/username/Applications/<wbr>chirp-daily-20170501.app/<wbr>Conten<br>
>><br>
ts/MacOS/../Resources/chirp/<wbr>chirpw:143:<br>
>> > PangoWarning: Invalid<br>
UTF-8 string passed to pango_layout_set_text()<br>
>> > gtk.main()<br>
>> ><br>
>> > I'm using the<br>
osx-pl2303-installer.pkg for my serial driver. This is<br>
>> > currently the only radio<br>
for which I have a programming cable.<br>
>><br>
______________________________<wbr>_________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
>> This message was sent to Rich<br>
at <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
>> To unsubscribe, send an email<br>
to chirp_users-unsubscribe@intrep<br>
>> <a href="http://id.danplanet.com" target="_blank" rel="noreferrer">id.danplanet.com</a><br>
>><br>
><br>
><br>
><br>
> --<br>
> S. Richard Baker<br>
> 250 Furnace Dock Road<br>
> Cortlandt Manor, NY 10567<br>
><br>
> Home: <a href="tel:914-736-1350" value="+19147361350">914-736-1350</a><br>
<(914)%20736-1350><br>
> Cell: <a href="tel:917-922-2463" value="+19179222463">917-922-2463</a><br>
<(917)%20922-2463><br>
> Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Jardy at<br>
<a href="mailto:jardy72@yahoo.com">jardy72@yahoo.com</a><br>
> To unsubscribe, send an email to<br>
chirp_users-unsubscribe@<br>
> <a href="http://intrepid.danplanet.com" target="_blank" rel="noreferrer">intrepid.danplanet.com</a><br>
><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Rich at<br>
<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
> To unsubscribe, send an email to<br>
chirp_users-unsubscribe@<br>
> <a href="http://intrepid.danplanet.com" target="_blank" rel="noreferrer">intrepid.danplanet.com</a><br>
><br>
<br>
<br>
<br>
--<br>
S. Richard Baker<br>
250 Furnace Dock Road<br>
Cortlandt Manor, NY 10567<br>
<br>
Home: 914-736-1350<br>
Cell: 917-922-2463<br>
Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/b15c20c7/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/b15c20c7/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 8<br>
Date: Sat, 20 May 2017 19:30:55 -0400<br>
From: Rich Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
<br>
<CAELWbPGYBw51s9AL8BoZuUighp_<wbr>aUj05Dfj_vL9ZWKyqidhp=<a href="mailto:Q@mail.gmail.com">Q@mail.<wbr>gmail.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
Tried to unsubscribe over 10 times both<br>
on the website and by sending<br>
emails.<br>
<br>
On Sat, May 20, 2017 at 6:06 PM, Jim<br>
McCorison <<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a>><br>
wrote:<br>
<br>
> Wow! What a polite request. I just<br>
can't try and help you fast enough.<br>
><br>
> Not.<br>
><br>
> Jim McCorison<br>
> Orcas Island, WA<br>
><br>
> On May 20, 2017, at 2:59 PM, Rich<br>
Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
><br>
> Unsubscribe me from this list<br>
NOW.<br>
><br>
> On Sat, May 20, 2017 at 3:36 PM,<br>
Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
wrote:<br>
><br>
>> On Sat, May 20, 2017 at 11:08<br>
AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
>> wrote:<br>
>> > I have been fighting<br>
similar problems on Win10 on my Baofeng UV-5R+. I<br>
>> too<br>
>> > rolled back the driver to<br>
3.2.0.0 to get my "genuine" cable that I<br>
>> purchase<br>
>> > from HRO to work once I<br>
upgraded to Win10. It worked fine on Win7 and<br>
>> never<br>
>> > had a problem with the<br>
latest driver but would not work on Win10 till I<br>
>> > rolled the driver<br>
back. I then turned off the auto driver updates for<br>
>> this<br>
>> > device. Everything<br>
worked fine after rolling the driver back.<br>
>> ><br>
>> > A few months later when I<br>
tried to read the radio again, it would not<br>
>> > connect. I checked<br>
the driver and it was still the 3.2.0.0 driver in my<br>
>> > listing. It took me<br>
several days till I updated the driver to the<br>
>> latest<br>
>> > driver which of course<br>
did not work, but when I rolled it back again the<br>
>> > 3.2.0.0 driver from the<br>
pick list for this device, it began to work<br>
>> again.<br>
>> > Don't ask me what is<br>
going on but then set it back for auto updates. I<br>
>> will<br>
>> > now just roll the driver<br>
back every time I want to use this cable.<br>
>> ><br>
>> > I suggest you try to<br>
update your driver and then roll it back again to<br>
>> > 3.2.0.0 to see if that<br>
works for you. I know it sounds stupid but it is<br>
>> > worth a try since it<br>
worked for me.<br>
>> ><br>
>> ><br>
>> > Herb, KB7UVC<br>
>> > NW APRS Group, West Sound<br>
Coordinator<br>
>> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
>><br>
>> There is no need to disable<br>
updates. If Windows does update your<br>
>> Prolific driver, the previous<br>
driver is still installed. All you have<br>
>> to do is go into Device<br>
Manager and re-select the driver version that<br>
>> you want to use. I keep<br>
several Prolific driver versions installed and<br>
>> switch between then at will<br>
for testing purposes.<br>
>><br>
>> Jim KC9HI<br>
>><br>
>><br>
______________________________<wbr>_________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
>> This message was sent to Rich<br>
at <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
>> To unsubscribe, send an email<br>
to chirp_users-unsubscribe@intrep<br>
>> <a href="http://id.danplanet.com" target="_blank" rel="noreferrer">id.danplanet.com</a><br>
>><br>
><br>
><br>
><br>
> --<br>
> S. Richard Baker<br>
> 250 Furnace Dock Road<br>
> Cortlandt Manor, NY 10567<br>
><br>
> Home: 914-736-1350<br>
<(914)%20736-1350><br>
> Cell: 917-922-2463<br>
<(917)%20922-2463><br>
> Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to K2SON at<br>
<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a><br>
> To unsubscribe, send an email to<br>
chirp_users-unsubscribe@<br>
> <a href="http://intrepid.danplanet.com" target="_blank" rel="noreferrer">intrepid.danplanet.com</a><br>
><br>
><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Rich at<br>
<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
> To unsubscribe, send an email to<br>
chirp_users-unsubscribe@<br>
> <a href="http://intrepid.danplanet.com" target="_blank" rel="noreferrer">intrepid.danplanet.com</a><br>
><br>
<br>
<br>
<br>
--<br>
S. Richard Baker<br>
250 Furnace Dock Road<br>
Cortlandt Manor, NY 10567<br>
<br>
Home: 914-736-1350<br>
Cell: 917-922-2463<br>
Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/70cc1511/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/70cc1511/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 9<br>
Date: Sat, 20 May 2017 18:03:34 -0700<br>
From: Jim McCorison <<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <<a href="mailto:20885233-494D-4BE4-B06E-CDBE22B4C2BF@mccorison.com">20885233-494D-4BE4-B06E-<wbr>CDBE22B4C2BF@mccorison.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
Perhaps it you reached out with a<br>
polite request along the lines of ?I?m having problems<br>
unsubscribing from this list. I?ve sent an unsubscribe<br>
request email without success and I?ve tried the website<br>
without success. Does any body have any ideas what I?m doing<br>
wrong?? Bonus points for sending it as a separate thread<br>
with s subject of something like ?Need help. Problems<br>
unsubscribing." Such an inquiry will probably get you a lot<br>
more assistance than just throwing a grenade into the<br>
mailing list.<br>
<br>
---<br>
Jim McCorison<br>
Orcas Island, WA<br>
<br>
<br>
<br>
> On May 20, 2017, at 4:30 PM, Rich<br>
Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
><br>
> Tried to unsubscribe over 10 times<br>
both on the website and by sending emails.<br>
><br>
> On Sat, May 20, 2017 at 6:06 PM,<br>
Jim McCorison <<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a><br>
<mailto:<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a>>><br>
wrote:<br>
> Wow! What a polite request. I just<br>
can't try and help you fast enough.<br>
><br>
> Not.<br>
><br>
> Jim McCorison<br>
> Orcas Island, WA<br>
><br>
> On May 20, 2017, at 2:59 PM, Rich<br>
Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
<mailto:<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>>><br>
wrote:<br>
><br>
>> Unsubscribe me from this list<br>
NOW. <br>
>><br>
>> On Sat, May 20, 2017 at 3:36<br>
PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a><br>
<mailto:<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>>><br>
wrote:<br>
>> On Sat, May 20, 2017 at 11:08<br>
AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a><br>
<mailto:<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.<wbr>com</a>>><br>
wrote:<br>
>> > I have been fighting<br>
similar problems on Win10 on my Baofeng UV-5R+. I too<br>
>> > rolled back the driver to<br>
3.2.0.0 to get my "genuine" cable that I purchase<br>
>> > from HRO to work once I<br>
upgraded to Win10. It worked fine on Win7 and never<br>
>> > had a problem with the<br>
latest driver but would not work on Win10 till I<br>
>> > rolled the driver<br>
back. I then turned off the auto driver updates for<br>
this<br>
>> > device. Everything<br>
worked fine after rolling the driver back.<br>
>> ><br>
>> > A few months later when I<br>
tried to read the radio again, it would not<br>
>> > connect. I checked<br>
the driver and it was still the 3.2.0.0 driver in my<br>
>> > listing. It took me<br>
several days till I updated the driver to the latest<br>
>> > driver which of course<br>
did not work, but when I rolled it back again the<br>
>> > 3.2.0.0 driver from the<br>
pick list for this device, it began to work again.<br>
>> > Don't ask me what is<br>
going on but then set it back for auto updates. I<br>
will<br>
>> > now just roll the driver<br>
back every time I want to use this cable.<br>
>> ><br>
>> > I suggest you try to<br>
update your driver and then roll it back again to<br>
>> > 3.2.0.0 to see if that<br>
works for you. I know it sounds stupid but it is<br>
>> > worth a try since it<br>
worked for me.<br>
>> ><br>
>> ><br>
>> > Herb, KB7UVC<br>
>> > NW APRS Group, West Sound<br>
Coordinator<br>
>> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a> <<a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a>><br>
>><br>
>> There is no need to disable<br>
updates. If Windows does update your<br>
>> Prolific driver, the previous<br>
driver is still installed. All you have<br>
>> to do is go into Device<br>
Manager and re-select the driver version that<br>
>> you want to use. I keep<br>
several Prolific driver versions installed and<br>
>> switch between then at will<br>
for testing purposes.<br>
>><br>
>> Jim KC9HI<br>
>><br>
>><br>
______________________________<wbr>_________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
<<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br>
>> This message was sent to Rich<br>
at <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
<mailto:<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
>> To unsubscribe, send an email<br>
to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br>
>><br>
>><br>
>><br>
>> --<br>
>> S. Richard Baker<br>
>> 250 Furnace Dock Road<br>
>> Cortlandt Manor, NY 10567<br>
>><br>
>> Home: 914-736-1350<br>
<tel:(914)%20736-1350><br>
>> Cell: <br>
917-922-2463 <tel:(917)%20922-2463><br>
>> Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
<mailto:<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>>____<wbr>______________________________<wbr>_____________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
<<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br>
>> This message was sent to K2SON<br>
at <a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a><br>
<mailto:<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a>><br>
>> To unsubscribe, send an email<br>
to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
<<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br>
> This message was sent to Rich at<br>
<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
<mailto:<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
> To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br>
><br>
><br>
><br>
> --<br>
> S. Richard Baker<br>
> 250 Furnace Dock Road<br>
> Cortlandt Manor, NY 10567<br>
><br>
> Home: 914-736-1350<br>
> Cell: 917-922-2463<br>
> Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
<mailto:<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>>____<wbr>______________________________<wbr>_____________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
<<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.<wbr>com/mailman/listinfo/chirp_<wbr>users</a>><br>
> This message was sent to K2SON at<br>
<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a><br>
<mailto:<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a>><br>
> To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<mailto:<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-<wbr>unsubscribe@intrepid.<wbr>danplanet.com</a>><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/049c5d1b/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/049c5d1b/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 10<br>
Date: Sat, 20 May 2017 19:40:49 -0600<br>
From: NNN Wx <<a href="mailto:nthreewx@gmail.com">nthreewx@gmail.com</a>><br>
Subject: [chirp_users] FT2D<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
Message-ID: <<a href="mailto:EB99DD23-C6B9-482B-AC28-220025DC2B3B@gmail.com">EB99DD23-C6B9-482B-AC28-<wbr>220025DC2B3B@gmail.com</a>><br>
Content-Type: text/plain;<br>
charset=utf-8<br>
<br>
I see ?bug? numbers 3325 and 3257 from<br>
last year, hoping support for Yaesu FT2D radio will work.<br>
It?s in the wish list, and doesn?t seem to need hardware for<br>
testing.<br>
I?m interested in getting chirp to<br>
work, and for some insights into how to get the serial<br>
connection to work on Macintosh OS X 10.12.5.<br>
<br>
HOW CAN I HELP (assuming this<br>
just needs effort)??<br>
<br>
------------------------------<br>
<br>
Message: 11<br>
Date: Sun, 21 May 2017 02:25:30 +0000<br>
(UTC)<br>
From: Bob Decker <<a href="mailto:k7bd@yahoo.com">k7bd@yahoo.com</a>><br>
Subject: Re: [chirp_users] chirp_users<br>
Digest, Vol 101, Issue 19<br>
To: "<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>"<br>
<<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <<a href="mailto:1930811399.2660365.1495333530472@mail.yahoo.com">1930811399.2660365.<wbr>1495333530472@mail.yahoo.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
Your method of removal from list did<br>
not work. I must cut back mailwh9ch I do not use.? Remove my<br>
address. The only other way to remove youre-mail by listing<br>
it as spam.ThanksBob<br>
<br>
<br>
On Saturday, May 20, 2017<br>
12:00 PM, "<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.<wbr>danplanet.com</a>"<br>
<<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.<wbr>danplanet.com</a>><br>
wrote:<br>
<br>
<br>
Send chirp_users mailing list<br>
submissions to<br>
??? <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<br>
To subscribe or unsubscribe via the<br>
World Wide Web, visit<br>
??? <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
or, via email, send a message with<br>
subject or body 'help' to<br>
??? <a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.<wbr>danplanet.com</a><br>
<br>
You can reach the person managing the<br>
list at<br>
??? <a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.<wbr>danplanet.com</a><br>
<br>
When replying, please edit your Subject<br>
line so it is more specific<br>
than "Re: Contents of chirp_users<br>
digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
? 1. RepeaterBook Proximety Not<br>
Accurate? (John Kobeck)<br>
? 2. Re: RepeaterBook Proximety Not<br>
Accurate? (Jim Unroe)<br>
? 3. Re: Cannot read Baofeng BF-888S<br>
(Herb Gerhardt)<br>
? 4. Re: Cannot read Baofeng BF-888S<br>
(Amnon Zohar)<br>
? 5. Re: Cannot read Baofeng BF-888S<br>
(Glenn At Home)<br>
? 6. Leixen VV-898E on MacOS? (was:<br>
...daily-20170501??? repeatable<br>
? ? ? crash) (Steve Sergeant)<br>
<br>
<br>
------------------------------<wbr>------------------------------<wbr>----------<br>
<br>
Message: 1<br>
Date: Fri, 19 May 2017 23:04:47 -0400<br>
From: John Kobeck <<a href="mailto:johnkobeck@me.com">johnkobeck@me.com</a>><br>
Subject: [chirp_users] RepeaterBook<br>
Proximety Not Accurate?<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
Message-ID: <<a href="mailto:5F40902E-156A-415A-B687-A0118642A496@me.com">5F40902E-156A-415A-B687-<wbr>A0118642A496@me.com</a>><br>
Content-Type: text/plain;<br>
charset=utf-8<br>
<br>
<br>
Hello Chirpers;<br>
<br>
I have a question. I am trying to<br>
program repeaters into a Kenwood TMV7. I have been using<br>
RepeaterBooks Proximity search. When setting a Manhattan?<br>
zip code for example, it doesn?t seem to matter if I<br>
indicate a 100 mile radius or a 300 mile radius. It only<br>
seems pull about a 15 miles radius. Is there a default that<br>
won?t allow a larger range?<br>
<br>
73s<br>
KC2MPG<br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sat, 20 May 2017 05:48:35 -0400<br>
From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
Subject: Re: [chirp_users] RepeaterBook<br>
Proximety Not Accurate?<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
???<br>
<<a href="mailto:CADnO8U7LPAPZM6s2Y6mtYQd1qz%2Bt%2BQNJR9xDXG_AAX2kbBvqug@mail.gmail.com">CADnO8U7LPAPZM6s2Y6mtYQd1qz+<wbr>t+QNJR9xDXG_AAX2kbBvqug@mail.<wbr>gmail.com</a>><br>
Content-Type: text/plain;<br>
charset="UTF-8"<br>
<br>
On Fri, May 19, 2017 at 11:04 PM, John<br>
Kobeck <<a href="mailto:johnkobeck@me.com">johnkobeck@me.com</a>><br>
wrote:<br>
><br>
> Hello Chirpers;<br>
><br>
> I have a question. I am trying to<br>
program repeaters into a Kenwood TMV7. I have been using<br>
RepeaterBooks Proximity search. When setting a Manhattan?<br>
zip code for example, it doesn?t seem to matter if I<br>
indicate a 100 mile radius or a 300 mile radius. It only<br>
seems pull about a 15 miles radius. Is there a default that<br>
won?t allow a larger range?<br>
><br>
> 73s<br>
> KC2MPG<br>
<br>
Using "Import from data source",<br>
"Location" = 10001 and "Band" = "2<br>
meters (144MHz)", I the following<br>
numbers of repeaters are retrieved.<br>
<br>
Distance: # of repeaters<br>
15: 50<br>
100: 367<br>
300: 1387<br>
<br>
Jim KC9HI<br>
<br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Sat, 20 May 2017 08:08:14 -0700<br>
From: "Herb Gerhardt" <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
<001301d2d17a$e7936ea0$<wbr>b6ba4be0$@com><br>
Content-Type: text/plain;???<br>
charset="us-ascii"<br>
<br>
I have been fighting similar problems<br>
on Win10 on my Baofeng UV-5R+.? I too<br>
rolled back the driver to 3.2.0.0 to<br>
get my "genuine" cable that I purchase<br>
from HRO to work once I upgraded to<br>
Win10.? It worked fine on Win7 and never<br>
had a problem with the latest driver<br>
but would not work on Win10 till I<br>
rolled the driver back.? I then turned<br>
off the auto driver updates for this<br>
device.? Everything worked fine after<br>
rolling the driver back.<br>
<br>
A few months later when I tried to read<br>
the radio again, it would not<br>
connect.? I checked the driver and it<br>
was still the 3.2.0.0 driver in my<br>
listing.? It took me several days till<br>
I updated the driver to the latest<br>
driver which of course did not work,<br>
but when I rolled it back again the<br>
3.2.0.0 driver from the pick list for<br>
this device, it began to work again.<br>
Don't ask me what is going on but then<br>
set it back for auto updates.? I will<br>
now just roll the driver back every<br>
time I want to use this cable.<br>
<br>
I suggest you try to update your driver<br>
and then roll it back again to<br>
3.2.0.0 to see if that works for you.?<br>
I know it sounds stupid but it is<br>
worth a try since it worked for me.<br>
<br>
<br>
Herb, KB7UVC<br>
NW APRS Group, West Sound Coordinator<br>
Our WEB Site:? <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
<br>
<br>
<br>
<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.<wbr>danplanet.com</a><br>
[mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@<wbr>intrepid.danplanet.com</a>]<br>
On Behalf Of YT9TP -<br>
Pedja<br>
Sent: Friday, May 19, 2017 1:08 AM<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
Subject: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
<br>
I have strange issue with Windows 10,<br>
prolific serial adapter and BF-888S.<br>
It reports unable to download from<br>
radio.<br>
<br>
Driver is proper (version 3.2.0.0,<br>
update is disabled), and Chirp works fine<br>
with the same adapter and other radio<br>
(Baofeng UV-B5) reading and writing.<br>
<br>
I tried four different BF-888S and<br>
neither can be read.<br>
<br>
However, when I use the same USB<br>
adapter on my old Windows XP computer,<br>
Chirp easily reads and writes those<br>
BF-888S.<br>
<br>
Has anyone met with this problem?<br>
<br>
--<br>
<br>
YT9TP, Pedja<br>
<a href="http://www.yt9tp.iz.rs" target="_blank" rel="noreferrer">http://www.yt9tp.iz.rs</a><br>
<br>
<br>
<br>
---<br>
This email has been checked for viruses<br>
by Avast antivirus software.<br>
<a href="https://www.avast.com/antivirus" target="_blank" rel="noreferrer">https://www.avast.com/<wbr>antivirus</a><br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Sat, 20 May 2017 18:23:30 +0300<br>
From: Amnon Zohar <<a href="mailto:amnon.zohar@gmail.com">amnon.zohar@gmail.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
??? <<a href="mailto:CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A@mail.gmail.com">CAN5HzcQAXwM2rBUjdtwkMCOb7_<wbr>XfsmQ6PgMSqsc5M4B0i19F-A@mail.<wbr>gmail.com</a>><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
I guess some update of win10 change<br>
some part of the driver without<br>
changing the driver version number.<br>
Redowngrading probably fix this. But<br>
this just a wild guess. The solution is<br>
important. The reason is less<br>
important<br>
<br>
?????? 20 ???? 2017 18:09,? "Herb<br>
Gerhardt" <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
???:<br>
<br>
> I have been fighting similar<br>
problems on Win10 on my Baofeng UV-5R+.? I too<br>
> rolled back the driver to 3.2.0.0<br>
to get my "genuine" cable that I purchase<br>
> from HRO to work once I upgraded<br>
to Win10.? It worked fine on Win7 and<br>
> never<br>
> had a problem with the latest<br>
driver but would not work on Win10 till I<br>
> rolled the driver back.? I then<br>
turned off the auto driver updates for this<br>
> device.? Everything worked fine<br>
after rolling the driver back.<br>
><br>
> A few months later when I tried to<br>
read the radio again, it would not<br>
> connect.? I checked the driver and<br>
it was still the 3.2.0.0 driver in my<br>
> listing.? It took me several days<br>
till I updated the driver to the latest<br>
> driver which of course did not<br>
work, but when I rolled it back again the<br>
> 3.2.0.0 driver from the pick list<br>
for this device, it began to work again.<br>
> Don't ask me what is going on but<br>
then set it back for auto updates.? I<br>
> will<br>
> now just roll the driver back<br>
every time I want to use this cable.<br>
><br>
> I suggest you try to update your<br>
driver and then roll it back again to<br>
> 3.2.0.0 to see if that works for<br>
you.? I know it sounds stupid but it is<br>
> worth a try since it worked for<br>
me.<br>
><br>
><br>
> Herb, KB7UVC<br>
> NW APRS Group, West Sound<br>
Coordinator<br>
> Our WEB Site:? <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
><br>
><br>
><br>
><br>
><br>
> -----Original Message-----<br>
> From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.<wbr>danplanet.com</a><br>
> [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@<wbr>intrepid.danplanet.com</a>]<br>
On Behalf Of YT9TP -<br>
> Pedja<br>
> Sent: Friday, May 19, 2017 1:08<br>
AM<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> Subject: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
><br>
> I have strange issue with Windows<br>
10, prolific serial adapter and BF-888S.<br>
> It reports unable to download from<br>
radio.<br>
><br>
> Driver is proper (version 3.2.0.0,<br>
update is disabled), and Chirp works<br>
> fine<br>
> with the same adapter and other<br>
radio (Baofeng UV-B5) reading and writing.<br>
><br>
> I tried four different BF-888S and<br>
neither can be read.<br>
><br>
> However, when I use the same USB<br>
adapter on my old Windows XP computer,<br>
> Chirp easily reads and writes<br>
those BF-888S.<br>
><br>
> Has anyone met with this problem?<br>
><br>
> --<br>
><br>
> YT9TP, Pedja<br>
> <a href="http://www.yt9tp.iz.rs" target="_blank" rel="noreferrer">http://www.yt9tp.iz.rs</a><br>
><br>
><br>
><br>
> ---<br>
> This email has been checked for<br>
viruses by Avast antivirus software.<br>
> <a href="https://www.avast.com/antivirus" target="_blank" rel="noreferrer">https://www.avast.com/<wbr>antivirus</a><br>
><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to amnon at<br>
<a href="mailto:amnon.zohar@gmail.com">amnon.zohar@gmail.com</a><br>
> To unsubscribe, send an email to<br>
chirp_users-unsubscribe@<br>
> <a href="http://intrepid.danplanet.com" target="_blank" rel="noreferrer">intrepid.danplanet.com</a><br>
><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ec65c2c2/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/ec65c2c2/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 5<br>
Date: Sat, 20 May 2017 11:13:04 -0500<br>
From: "Glenn At Home" <<a href="mailto:GlennErvin@cableone.net">GlennErvin@cableone.net</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: "Discussion of CHIRP" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID:<br>
<047601d2d183$f683cf00$<wbr>0601a8c0@NUCPPYH><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
I wonder if you did not reboot windows<br>
soon enough to solidify the change.<br>
You would think that this would not<br>
matter, but maybe Windows needs to reboot for changes such<br>
as the driver setting.<br>
Glenn<br>
I have been fighting similar problems<br>
on Win10 on my Baofeng UV-5R+.? I too<br>
rolled back the driver to 3.2.0.0 to<br>
get my "genuine" cable that I purchase<br>
from HRO to work once I upgraded to<br>
Win10.? It worked fine on Win7 and never<br>
had a problem with the latest driver<br>
but would not work on Win10 till I<br>
rolled the driver back.? I then turned<br>
off the auto driver updates for this<br>
device.? Everything worked fine after<br>
rolling the driver back.<br>
<br>
A few months later when I tried to read<br>
the radio again, it would not<br>
connect.? I checked the driver and it<br>
was still the 3.2.0.0 driver in my<br>
listing.? It took me several days till<br>
I updated the driver to the latest<br>
driver which of course did not work,<br>
but when I rolled it back again the<br>
3.2.0.0 driver from the pick list for<br>
this device, it began to work again.<br>
Don't ask me what is going on but then<br>
set it back for auto updates.? I will<br>
now just roll the driver back every<br>
time I want to use this cable.<br>
<br>
I suggest you try to update your driver<br>
and then roll it back again to<br>
3.2.0.0 to see if that works for you.?<br>
I know it sounds stupid but it is<br>
worth a try since it worked for me.<br>
<br>
<br>
Herb, KB7UVC<br>
NW APRS Group, West Sound Coordinator<br>
Our WEB Site:? <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
<br>
<br>
<br>
<br>
<br>
-----Original Message-----<br>
From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.<wbr>danplanet.com</a><br>
[mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@<wbr>intrepid.danplanet.com</a>]<br>
On Behalf Of YT9TP -<br>
Pedja<br>
Sent: Friday, May 19, 2017 1:08 AM<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
Subject: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
<br>
I have strange issue with Windows 10,<br>
prolific serial adapter and BF-888S.<br>
It reports unable to download from<br>
radio.<br>
<br>
Driver is proper (version 3.2.0.0,<br>
update is disabled), and Chirp works fine<br>
with the same adapter and other radio<br>
(Baofeng UV-B5) reading and writing.<br>
<br>
I tried four different BF-888S and<br>
neither can be read.<br>
<br>
However, when I use the same USB<br>
adapter on my old Windows XP computer,<br>
Chirp easily reads and writes those<br>
BF-888S.<br>
<br>
Has anyone met with this problem?<br>
<br>
--<br>
<br>
YT9TP, Pedja<br>
<a href="http://www.yt9tp.iz.rs" target="_blank" rel="noreferrer">http://www.yt9tp.iz.rs</a><br>
<br>
<br>
<br>
---<br>
This email has been checked for viruses<br>
by Avast antivirus software.<br>
<a href="https://www.avast.com/antivirus" target="_blank" rel="noreferrer">https://www.avast.com/<wbr>antivirus</a><br>
<br>
______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
This message was sent to amnon at <a href="mailto:amnon.zohar@gmail.com">amnon.zohar@gmail.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<br>
<br>
<br>
------------------------------<wbr>------------------------------<wbr>--------------------<br>
<br>
<br>
______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
This message was sent to Glenn at <a href="mailto:glennervin@cableone.net">glennervin@cableone.net</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/c0433d81/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/c0433d81/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 6<br>
Date: Sat, 20 May 2017 10:59:00 -0700<br>
From: Steve Sergeant <<a href="mailto:stevesgt@effable.com">stevesgt@effable.com</a>><br>
Subject: [chirp_users] Leixen VV-898E<br>
on MacOS? (was:<br>
??? ...daily-20170501??? repeatable<br>
crash)<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
Message-ID: <<a href="mailto:7623fd03-20f3-5351-6a42-7fc3f405c22a@effable.com">7623fd03-20f3-5351-6a42-<wbr>7fc3f405c22a@effable.com</a>><br>
Content-Type: text/plain;<br>
charset=utf-8<br>
<br>
Just to ping the group again:<br>
<br>
Has anybody out there had recent luck<br>
programming the Leixen VV-898E<br>
using a recent build of Chirp on<br>
MacOS?<br>
<br>
<br>
<br>
On 5/2/17 0:08 AM, Steve Sergeant<br>
wrote:<br>
> I just installed<br>
chirp-daily-20170501.app to try. I am attempting to<br>
> copy setups from one Leixen<br>
VV-898E radio into several others.<br>
><br>
> However, a fraction of a second<br>
after the screen fills with the data<br>
> from the radio, Chirp unexpectedly<br>
quits, and I'm given the opportunity<br>
> to send a report to Apple.<br>
><br>
> My system is:<br>
><br>
> Macbook Air 11" (MacBookAir6,1)<br>
> MacOS X 10.11.6 (15G1421)<br>
> 4GB RAM<br>
><br>
> The last line in .chirp/debug.log<br>
reads:<br>
><br>
/Users/username/Applications/<wbr>chirp-daily-20170501.app/<wbr>Contents/MacOS/../Resources/<wbr>chirp/chirpw:143:<br>
> PangoWarning: Invalid UTF-8 string<br>
passed to pango_layout_set_text()<br>
>? gtk.main()<br>
><br>
> I'm using the<br>
osx-pl2303-installer.pkg for my serial driver. This is<br>
> currently the only radio for which<br>
I have a programming cable.<br>
<br>
<br>
------------------------------<br>
<br>
______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<br>
End of chirp_users Digest, Vol 101,<br>
Issue 19<br>
******************************<wbr>**************<br>
<br>
<br>
<br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/7b6dbd28/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170521/7b6dbd28/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 12<br>
Date: Sat, 20 May 2017 21:28:16 -0500<br>
From: Carrie Jackson <<a href="mailto:mssjacksonifyournasty@gmail.com">mssjacksonifyournasty@gmail.<wbr>com</a>><br>
Subject: Re: [chirp_users] chirp_users<br>
Digest, Vol 101, Issue 19<br>
To: Bob Decker <<a href="mailto:k7bd@yahoo.com">k7bd@yahoo.com</a>>,<br>
Discussion of CHIRP<br>
<<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <93a354da-a162-4ad8-a2e4-<wbr>25a707fed0f1@Spark><br>
Content-Type: text/plain;<br>
charset="utf-8"<br>
<br>
<br>
<br>
Carrie Jackson liked your e-mail<br>
<br>
Spark by Readdle (<a href="https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_viral" target="_blank" rel="noreferrer">https://itunes.apple.com/app/<wbr>id997102246?mt=8&uo=4&at=<wbr>10l6UJ&ct=Spark_QR_viral</a>)<br>
<br>
Spark by Readdle (<a href="https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_viral" target="_blank" rel="noreferrer">https://itunes.apple.com/app/<wbr>id997102246?mt=8&uo=4&at=<wbr>10l6UJ&ct=Spark_QR_viral</a>)<br>
<br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/1bba98f9/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170520/1bba98f9/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 13<br>
Date: Sun, 21 May 2017 13:58:24 -0400<br>
From: Joe Puma <<a href="mailto:theprogramllc@yahoo.com">theprogramllc@yahoo.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <<a href="mailto:762A954A-D894-4632-A374-F805FE65E9A1@yahoo.com">762A954A-D894-4632-A374-<wbr>F805FE65E9A1@yahoo.com</a>><br>
Content-Type: text/plain;<br>
charset="us-ascii"<br>
<br>
Rich do it yourself. Read bottom of<br>
email.<br>
<br>
<br>
Sent from my iPhone<br>
<br>
> On May 20, 2017, at 5:59 PM, Rich<br>
Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
><br>
> Unsubscribe me from this list<br>
NOW. <br>
><br>
>> On Sat, May 20, 2017 at 3:36<br>
PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
wrote:<br>
>> On Sat, May 20, 2017 at 11:08<br>
AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
wrote:<br>
>> > I have been fighting<br>
similar problems on Win10 on my Baofeng UV-5R+. I too<br>
>> > rolled back the driver to<br>
3.2.0.0 to get my "genuine" cable that I purchase<br>
>> > from HRO to work once I<br>
upgraded to Win10. It worked fine on Win7 and never<br>
>> > had a problem with the<br>
latest driver but would not work on Win10 till I<br>
>> > rolled the driver<br>
back. I then turned off the auto driver updates for<br>
this<br>
>> > device. Everything<br>
worked fine after rolling the driver back.<br>
>> ><br>
>> > A few months later when I<br>
tried to read the radio again, it would not<br>
>> > connect. I checked<br>
the driver and it was still the 3.2.0.0 driver in my<br>
>> > listing. It took me<br>
several days till I updated the driver to the latest<br>
>> > driver which of course<br>
did not work, but when I rolled it back again the<br>
>> > 3.2.0.0 driver from the<br>
pick list for this device, it began to work again.<br>
>> > Don't ask me what is<br>
going on but then set it back for auto updates. I<br>
will<br>
>> > now just roll the driver<br>
back every time I want to use this cable.<br>
>> ><br>
>> > I suggest you try to<br>
update your driver and then roll it back again to<br>
>> > 3.2.0.0 to see if that<br>
works for you. I know it sounds stupid but it is<br>
>> > worth a try since it<br>
worked for me.<br>
>> ><br>
>> ><br>
>> > Herb, KB7UVC<br>
>> > NW APRS Group, West Sound<br>
Coordinator<br>
>> > Our WEB Site: <a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
>><br>
>> There is no need to disable<br>
updates. If Windows does update your<br>
>> Prolific driver, the previous<br>
driver is still installed. All you have<br>
>> to do is go into Device<br>
Manager and re-select the driver version that<br>
>> you want to use. I keep<br>
several Prolific driver versions installed and<br>
>> switch between then at will<br>
for testing purposes.<br>
>><br>
>> Jim KC9HI<br>
>><br>
>><br>
______________________________<wbr>_________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
>> This message was sent to Rich<br>
at <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
>> To unsubscribe, send an email<br>
to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
><br>
><br>
><br>
> --<br>
> S. Richard Baker<br>
> 250 Furnace Dock Road<br>
> Cortlandt Manor, NY 10567<br>
><br>
> Home: 914-736-1350<br>
> Cell: 917-922-2463<br>
> Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Joe Puma<br>
at <a href="mailto:theprogramllc@yahoo.com">theprogramllc@yahoo.com</a><br>
> To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/ec3050d6/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170521/ec3050d6/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
Message: 14<br>
Date: Sun, 21 May 2017 13:59:32 -0400<br>
From: Joe Puma <<a href="mailto:theprogramllc@yahoo.com">theprogramllc@yahoo.com</a>><br>
Subject: Re: [chirp_users] Cannot read<br>
Baofeng BF-888S<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a>><br>
Message-ID: <<a href="mailto:9FDE6A55-5F80-439E-AFFE-51E5AF484F0D@yahoo.com">9FDE6A55-5F80-439E-AFFE-<wbr>51E5AF484F0D@yahoo.com</a>><br>
Content-Type: text/plain;<br>
charset="us-ascii"<br>
<br>
Lol<br>
<br>
<br>
Sent from my iPhone<br>
<br>
> On May 20, 2017, at 6:06 PM, Jim<br>
McCorison <<a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a>><br>
wrote:<br>
><br>
> Wow! What a polite request. I just<br>
can't try and help you fast enough.<br>
><br>
> Not.<br>
><br>
> Jim McCorison<br>
> Orcas Island, WA<br>
><br>
>> On May 20, 2017, at 2:59 PM,<br>
Rich Baker <<a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a>><br>
wrote:<br>
>><br>
>> Unsubscribe me from this list<br>
NOW. <br>
>><br>
>>> On Sat, May 20, 2017 at<br>
3:36 PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
wrote:<br>
>>> On Sat, May 20, 2017 at<br>
11:08 AM, Herb Gerhardt <<a href="mailto:hgerhardt@wavecable.com">hgerhardt@wavecable.com</a>><br>
wrote:<br>
>>> > I have been fighting<br>
similar problems on Win10 on my Baofeng UV-5R+. I too<br>
>>> > rolled back the<br>
driver to 3.2.0.0 to get my "genuine" cable that I purchase<br>
>>> > from HRO to work once<br>
I upgraded to Win10. It worked fine on Win7 and never<br>
>>> > had a problem with<br>
the latest driver but would not work on Win10 till I<br>
>>> > rolled the driver<br>
back. I then turned off the auto driver updates for<br>
this<br>
>>> > device. <br>
Everything worked fine after rolling the driver back.<br>
>>> ><br>
>>> > A few months later<br>
when I tried to read the radio again, it would not<br>
>>> > connect. I<br>
checked the driver and it was still the 3.2.0.0 driver in<br>
my<br>
>>> > listing. It<br>
took me several days till I updated the driver to the<br>
latest<br>
>>> > driver which of<br>
course did not work, but when I rolled it back again the<br>
>>> > 3.2.0.0 driver from<br>
the pick list for this device, it began to work again.<br>
>>> > Don't ask me what is<br>
going on but then set it back for auto updates. I<br>
will<br>
>>> > now just roll the<br>
driver back every time I want to use this cable.<br>
>>> ><br>
>>> > I suggest you try to<br>
update your driver and then roll it back again to<br>
>>> > 3.2.0.0 to see if<br>
that works for you. I know it sounds stupid but it is<br>
>>> > worth a try since it<br>
worked for me.<br>
>>> ><br>
>>> ><br>
>>> > Herb, KB7UVC<br>
>>> > NW APRS Group, West<br>
Sound Coordinator<br>
>>> > Our WEB Site: <br>
<a href="http://blog.nwaprs.info/" target="_blank" rel="noreferrer">http://blog.nwaprs.info/</a><br>
>>><br>
>>> There is no need to<br>
disable updates. If Windows does update your<br>
>>> Prolific driver, the<br>
previous driver is still installed. All you have<br>
>>> to do is go into Device<br>
Manager and re-select the driver version that<br>
>>> you want to use. I keep<br>
several Prolific driver versions installed and<br>
>>> switch between then at<br>
will for testing purposes.<br>
>>><br>
>>> Jim KC9HI<br>
>>><br>
>>><br>
______________________________<wbr>_________________<br>
>>> chirp_users mailing list<br>
>>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
>>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
>>> This message was sent to<br>
Rich at <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
>>> To unsubscribe, send an<br>
email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
>><br>
>><br>
>><br>
>> --<br>
>> S. Richard Baker<br>
>> 250 Furnace Dock Road<br>
>> Cortlandt Manor, NY 10567<br>
>><br>
>> Home: 914-736-1350<br>
>> Cell: <br>
917-922-2463<br>
>> Email: <a href="mailto:rbakedq@gmail.com">rbakedq@gmail.com</a><br>
>><br>
______________________________<wbr>_________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
>> This message was sent to K2SON<br>
at <a href="mailto:jimmcc@mccorison.com">jimmcc@mccorison.com</a><br>
>> To unsubscribe, send an email<br>
to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
><br>
______________________________<wbr>_________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
> This message was sent to Joe Puma<br>
at <a href="mailto:theprogramllc@yahoo.com">theprogramllc@yahoo.com</a><br>
> To unsubscribe, send an email to<br>
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
-------------- next part<br>
--------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/161a0e09/attachment-0001.html" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>pipermail/chirp_users/<wbr>attachments/20170521/161a0e09/<wbr>attachment-0001.html</a><br>
<br>
<br>
------------------------------<br>
<br>
______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br>
<br>
End of chirp_users Digest, Vol 101,<br>
Issue 20<br>
******************************<wbr>**************<br>
<br>
______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank" rel="noreferrer">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
This message was sent to Stuart Rauh at <a href="mailto:stuart@rauhnet.com">stuart@rauhnet.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a></blockquote></div><br></div>