<div dir="ltr">I just got a pair of Baofeng UV-5RTP tri-power (8/4/1W) HT&#39;s.  I see on <a href="http://chirp.danplanet.com/projects/chirp/wiki/Home">CHIRP&#39;s wiki page</a> and elsewhere to use BF-F8HP when trying to program from CHIRP.  However, when I select that I get &quot;An error has occurred: Incorrect &#39;Model&#39; selected&quot; and the radio reboots.<div><br></div><div>If I select UV-5R as the model then CHIRP is able to download from the radio - but in CHIRP the only available power settings are HIGH and LOW.<br><div><br></div><div>I tried uploading to one of the radios when selecting UV-5R and it seemed to work fine.  On the radio I was still able to switch the transmit power between HIGH, MEDIUM and LOW - I&#39;m just not able to set that in CHIRP.</div></div><div><br></div><div>Should I just keep using the UV-5R selection or will that have unforeseen consequences (beyond having to manually set transmit power if I want medium). </div><div><br></div><div>The firmware for both (holding down #3 while starting up) is listed as BFP3-23.</div><div><br></div><div>I&#39;m on macOS 10.12.3 and using CHIRP daily-20170311 (latest build as of this morning).</div><div><br></div><div>Thanks for any info,</div><div>Tycen K7TYC</div></div>