<div dir="ltr">Radio is powered by bench supply, so no batteries. Just checked for you to be sure the cable was in all the way.<div><br></div><div>The volume suggested was a good one though. One I hadn't considered. It was likely I had the volume all the way down before. Alas, excitedly I just jumped up to try it without any luck. I tried it at both half-volume and maxed out. I got the same results as mentioned originally.</div><div><br></div><div>Also, I found the debug.log file. If it means anything to anyone, here's the error:</div><blockquote><br>[2016-11-28 22:30:30,418] chirp.ui.mainapp - DEBUG: User selected Icom IC-2200H on port /dev/ttyUSB0<br>[2016-11-28 22:30:30,527] chirp.ui.clone - DEBUG: Clone thread started<br>[2016-11-28 22:30:31,029] chirp.ui.reporting - DEBUG: Throttling...<br>[2016-11-28 22:30:31,029] chirp.ui.common - ERROR: -- Exception: --<br>[2016-11-28 22:30:31,030] chirp.ui.common - ERROR: Traceback (most recent call last):<br> File "/usr/lib/python2.7/site-packages/chirp/ui/clone.py", line 249, in run<br> self.__radio.sync_in()<br> File "/usr/lib/python2.7/site-packages/chirp/drivers/icf.py", line 616, in sync_in<br> self._mmap = clone_from_radio(self)<br> File "/usr/lib/python2.7/site-packages/chirp/drivers/icf.py", line 322, in clone_from_radio<br> raise errors.RadioError("Failed to communicate with the radio: %s" % e)<br>RadioError: Failed to communicate with the radio: Unexpected response from radio<br>[2016-11-28 22:30:31,030] chirp.ui.common - ERROR: ----------------<br>[2016-11-28 22:30:31,030] chirp.ui.clone - ERROR: Clone failed: Failed to communicate with the radio: Unexpected response from radio<br>[2016-11-28 22:30:31,316] chirp.ui.clone - DEBUG: Clone thread ended<br>[2016-11-28 22:30:31,317] chirp.ui.reporting - DEBUG: Reporting model usage: Icom_IC-2200H,download,True<br>[2016-11-28 22:30:31,318] chirp.ui.reporting - DEBUG: Reporting exception<br>[2016-11-28 22:30:31,318] chirp.ui.inputdialog - ERROR: --- Exception Dialog: Failed to communicate with the radio: Unexpected response from radio ---<br>[2016-11-28 22:30:31,318] chirp.ui.inputdialog - ERROR: None<br>[2016-11-28 22:30:31,319] chirp.ui.inputdialog - ERROR: ----------------------------</blockquote></div><div class="gmail_extra"><br clear="all"><div><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><font face="courier new, monospace"><br></font></div><div><font face="courier new, monospace"><br></font></div><div><font face="courier new, monospace"><br></font></div><font face="courier new, monospace"><div><font face="courier new, monospace">---</font></div><div><font face="courier new, monospace"><br></font></div><font size="1">Preserve your right to privacy. When replying to this email, I encourage you to make use of PGP compliant encryption. My key ID is A50DB9BC.</font></font></div></div></div>
<br><div class="gmail_quote">On Mon, Nov 28, 2016 at 9:33 PM, Glenn <span dir="ltr"><<a href="mailto:glennervin@cableone.net" target="_blank">glennervin@cableone.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><u></u>
<div bgcolor="#ffffff">
<div><font color="#0000ff" size="2" face="Arial">Joe,</font></div>
<div><font color="#0000ff" size="2" face="Arial">Some folks have had trouble from
either not getting the cable pushed in far enough. Also, they say to turn
the volume up all the way on the radio.</font></div>
<div><font color="#0000ff" size="2" face="Arial">Is the battery on the radio charged
enough?</font></div>
<div><font color="#0000ff" size="2" face="Arial">HTH.</font></div>
<div><font color="#0000ff" size="2" face="Arial">Glenn</font></div>
<blockquote style="PADDING-LEFT:5px;MARGIN-LEFT:5px;BORDER-LEFT:#0000ff 2px solid;PADDING-RIGHT:0px;MARGIN-RIGHT:0px"><span class="">
<div style="FONT:10pt arial">----- Original Message ----- </div>
<div style="BACKGROUND:#e4e4e4;FONT:10pt arial"><b>From:</b>
<a title="kamikazejoe@gmail.com" href="mailto:kamikazejoe@gmail.com" target="_blank">Kamikaze
Joe</a> </div>
<div style="FONT:10pt arial"><b>To:</b> <a title="chirp_users@intrepid.danplanet.com" href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a>
</div>
<div style="FONT:10pt arial"><b>Sent:</b> Monday, November 28, 2016 2:23
AM</div>
<div style="FONT:10pt arial"><b>Subject:</b> [chirp_users] Trouble with
programming ICOM IC-2200H</div>
<div><br></div>
</span><div><div class="h5"><div dir="ltr">Was hoping I could find some help getting my IC-2200H programmed.
<br><br>I've tried downloading from the radio using a generic brand
cable I bought off Amazon.<br>The procedures I've tried:<br><br>Example
1:<br>1) Put my Icom in cloning mode.<br>2) Select "Download from Radio" from
the Radio menu in the Chirp application.<br>3) Verified the Port.
Selected "Icom" as the vendor. And "IC-2200H" as the Model.<br>4) Click
"OK"<br><br>Result: Before I can even hit the button on my Icom that starts
sending the data, Chirp briefly flashes the "Cloning" progress bar and then
throws an error of "Unexpected response from Radio".<br><br>Example 2:<br>If I
repeat the above steps, but instead select "Detect" as the Model, I
immediately get an error saying it can't detect the radio. I didn't
expect it to work, but I wanted to rule it out.<br><br>Example 3:<br>1) Put my
Icom in cloning mode.<br>2) Select "Download from Radio" from the Radio menu
in the Chirp application.<br>3) Again Verified the Port, Vendor, and Model as
stated above.<br>4) Before clicking "OK", I pressed the button on my Icom to
start sending data. <br>5) Then I clicked "OK" in the Chirp
application.<br><br>Result: I tried this pressing the start button on
the Icom before clicking "OK" in Chirp, and I've tried pressing them
simultaneously. This method returns an error saying "Out of sync with
radio".<br><br>I've search through the archive and see the same errors I'm
seeing, but on posts that are several years old. The responses usually
recommend checking for a driver issue, but I've done that. The cable
itself seems to be functional to some degree, at least to me. I wouldn't
get the "Out of sync with radio" error if the application didn't receive
anything at all, right? While I don't have another device to test this
particular cable with, I do have another cable that I use to program my
Baofeng UV-82 with. The alternate cable uses the same chip (PL2303) and
therefor the same driver/module, and that works just fine. I am able to
download and program my Baofeng without any issues. So to the best of my
troubleshooting abilities, the cable doesn't seem likely.<br><br>Additionally,
the previous posts also reference Windows machines, but I am running Linux and
I do not have a Windows computer at my disposal. I am also using the
chirp-daily package on my system and made sure it was updated. Currently on
"CHIRP daily-20161123" at the time of this writing.<br><br>Any further
suggestions would be appreciated.<br><br>Thanks in advance<br><br>-Joe</div>
</div></div><p>
</p><hr><span class="">
<p></p>______________________________<wbr>_________________<br>chirp_users mailing
list<br><a href="mailto:chirp_users@intrepid.danplanet.com" target="_blank">chirp_users@intrepid.<wbr>danplanet.com</a><br><a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br></span>This
message was sent to Glenn at <a href="mailto:glennervin@cableone.net" target="_blank">glennervin@cableone.net</a><span class=""><br>To unsubscribe, send
an email to
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com" target="_blank">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a></span><p></p></blockquote></div>
<br>______________________________<wbr>_________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.<wbr>danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" rel="noreferrer" target="_blank">http://intrepid.danplanet.com/<wbr>mailman/listinfo/chirp_users</a><br>
This message was sent to Kamikaze Joe at <a href="mailto:kamikazejoe@gmail.com">kamikazejoe@gmail.com</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@<wbr>intrepid.danplanet.com</a><br></blockquote></div><br></div>