<p dir="ltr">Does anyone know if the new version fixes the tune dial? </p>
<div class="gmail_quote">On May 16, 2016 1:20 PM, "Pavel Milanes (CO7WT)" <pavelmc@gmail.com> wrote:<br type='attribution'><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div>
<p>Hi Robert, <br />
</p>
<p>There is a new batch of BTECH (Generation 3) out there that don't
have Chirp support yet, that apply for recently purchased ones
(yes for all the three models of BTECH).</p>
<p>We have the IDs and all programming details thanks to the
cooperation of the OEM and a patch with support for those radios
is on the develop queue ready to apply.</p>
<p>Oops!!! <br />
</p>
<p>Writing this email I noticed that the patch was applied just a
minutes ago, tomorrow we will have new Chirp version with support
for these radios.</p>
<p>73<br />
</p>
<div>El 16/05/16 a las 15:56, Robert Frick
escribió:<br />
</div>
<blockquote>
<pre>I have recently acquired the Btech UV5001. I also have the Btech UV2501+200 and the FTDI cable and the latest drivers. I am able to download and upload on the 2501+200, but I have not been able to have a successful download with the 5001. I continually receive the error that the radio os unable to be identified. I am able to program manually but I hate not having the ability for uniform programming with my other radios via CHIRP and my saved CSV files. Is anyone still working on the UV5001? the radio works well, I just want to be able to program with CHIRP.
Regards,
Robert
Sent from my iPad
</pre>
<blockquote>
<pre>On May 16, 2016, at 2:00 PM, <a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a> wrote:
Send chirp_users mailing list submissions to
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
To subscribe or unsubscribe via the World Wide Web, visit
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
or, via email, send a message with subject or body 'help' to
<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a>
You can reach the person managing the list at
<a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a>
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: Kenwood TK-762H (Tim Billingsley)
2. Re: Kenwood TK-762H (David Marshall)
3. Re: Kenwood TK-762H (<a href="mailto:clowery@va.net">clowery@va.net</a>)
4. Re: Kenwood TK-762H (Chris Petry)
5. Re: Kenwood TK-762H (Pavel Milanes (CO7WT))
----------------------------------------------------------------------
Message: 1
Date: Sun, 15 May 2016 23:10:12 +0000
From: Tim Billingsley <a href="mailto:kd5ckp@gmail.com"><kd5ckp@gmail.com></a>
Subject: Re: [chirp_users] Kenwood TK-762H
To: Discussion of CHIRP <a href="mailto:chirp_users@intrepid.danplanet.com"><chirp_users@intrepid.danplanet.com></a>
Message-ID:
<a href="mailto:CAG82UfC5+WPQYqs7-ESY3wrXSPbaGDi2neDDvsFuR5=nTchh1w@mail.gmail.com"><CAG82UfC5+WPQYqs7-ESY3wrXSPbaGDi2neDDvsFuR5=nTchh1w@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"
On Sun, May 15, 2016 at 12:38 PM, David Marshall <a href="mailto:dozerboy0157@gmail.com"><dozerboy0157@gmail.com></a>
wrote:
</pre>
<blockquote>
<pre>I have had the same issue with a 760H. Talked with Pavel. He seems to
think its a firmware issue that he has not resolved at this time. Good
luck. KC1EXK.
</pre>
</blockquote>
<pre>Also are any of the aforementioned issues OS related? If I locate a Windows
machine should I expect any better results?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160515/6f14cb26/attachment-0001.html">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160515/6f14cb26/attachment-0001.html</a>
------------------------------
Message: 2
Date: Sun, 15 May 2016 19:26:10 -0400
From: David Marshall <a href="mailto:dozerboy0157@gmail.com"><dozerboy0157@gmail.com></a>
Subject: Re: [chirp_users] Kenwood TK-762H
To: Discussion of CHIRP <a href="mailto:chirp_users@intrepid.danplanet.com"><chirp_users@intrepid.danplanet.com></a>
Message-ID:
<a href="mailto:CADVJEOz6K=nqYeoRZwypTegXm=oPDsqUcrb0wiDFwrRXvKN5JA@mail.gmail.com"><CADVJEOz6K=nqYeoRZwypTegXm=oPDsqUcrb0wiDFwrRXvKN5JA@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"
I am using Windows 10. The problem as explained to me is Windows program
runs too fast . Radio cannot go into program mode fast enough before
program times out. Pavel wrote a patch that made program try 3 times before
giving up. That still did not fix problem. I asked about a month ago if any
solution had been found, no reply. The only other way is to locate an older
model computer that can run original MSDOS based software. Ebay about $130
plus price of software. Again good luck hate to toss my radio its in nice
shape. KC1EXK 73s.
</pre>
<blockquote>
<pre>On May 15, 2016 7:10 PM, "Tim Billingsley" <a href="mailto:kd5ckp@gmail.com"><kd5ckp@gmail.com></a> wrote:
On Sun, May 15, 2016 at 12:38 PM, David Marshall <a href="mailto:dozerboy0157@gmail.com"><dozerboy0157@gmail.com></a>
wrote:
</pre>
<blockquote>
<pre>I have had the same issue with a 760H. Talked with Pavel. He seems to
think its a firmware issue that he has not resolved at this time. Good
luck. KC1EXK.
</pre>
</blockquote>
<pre>Also are any of the aforementioned issues OS related? If I locate a
Windows machine should I expect any better results?
_______________________________________________
chirp_users mailing list
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to David Marshall at <a href="mailto:dozerboy0157@gmail.com">dozerboy0157@gmail.com</a>
To unsubscribe, send an email to
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
</pre>
</blockquote>
<pre>-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160515/05803d9f/attachment-0001.html">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160515/05803d9f/attachment-0001.html</a>
------------------------------
Message: 3
Date: Sun, 15 May 2016 20:32:22 -0400
From: <a href="mailto:clowery@va.net">"clowery@va.net"</a> <a href="mailto:clowery@va.net"><clowery@va.net></a>
Subject: Re: [chirp_users] Kenwood TK-762H
To: Discussion of CHIRP <a href="mailto:chirp_users@intrepid.danplanet.com"><chirp_users@intrepid.danplanet.com></a>
Message-ID: <a href="mailto:20160515203222.12543fru9pozsjk0@webmail.va.net"><20160515203222.12543fru9pozsjk0@webmail.va.net></a>
Content-Type: text/plain; charset=ISO-8859-1; DelSp="Yes";
format="flowed"
Try downloading and running MOSLO, we used to use it for commercial software.
Charles Lowery, NM4V
Quoting David Marshall <a href="mailto:dozerboy0157@gmail.com"><dozerboy0157@gmail.com></a>:
</pre>
<blockquote>
<pre>I am using Windows 10. The problem as explained to me is Windows program
runs too fast . Radio cannot go into program mode fast enough before
program times out. Pavel wrote a patch that made program try 3 times before
giving up. That still did not fix problem. I asked about a month ago if any
solution had been found, no reply. The only other way is to locate an older
model computer that can run original MSDOS based software. Ebay about $130
plus price of software. Again good luck hate to toss my radio its in nice
shape. KC1EXK 73s.
</pre>
<blockquote>
<pre>On May 15, 2016 7:10 PM, "Tim Billingsley" <a href="mailto:kd5ckp@gmail.com"><kd5ckp@gmail.com></a> wrote:
On Sun, May 15, 2016 at 12:38 PM, David Marshall <a href="mailto:dozerboy0157@gmail.com"><dozerboy0157@gmail.com></a>
wrote:
</pre>
<blockquote>
<pre>I have had the same issue with a 760H. Talked with Pavel. He seems to
think its a firmware issue that he has not resolved at this time. Good
luck. KC1EXK.
</pre>
</blockquote>
<pre>Also are any of the aforementioned issues OS related? If I locate a
Windows machine should I expect any better results?
_______________________________________________
chirp_users mailing list
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to David Marshall at <a href="mailto:dozerboy0157@gmail.com">dozerboy0157@gmail.com</a>
To unsubscribe, send an email to
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
</pre>
</blockquote>
</blockquote>
<pre>
------------------------------
Message: 4
Date: Sun, 15 May 2016 20:41:05 -0400
From: Chris Petry <a href="mailto:chrispetry1971@gmail.com"><chrispetry1971@gmail.com></a>
Subject: Re: [chirp_users] Kenwood TK-762H
To: Discussion of CHIRP <a href="mailto:chirp_users@intrepid.danplanet.com"><chirp_users@intrepid.danplanet.com></a>
Message-ID:
<a href="mailto:CAAh+rOp_4nEYV1WvMDocE2hjgp8GqrAMwEqDCk5AgtQxXj80jQ@mail.gmail.com"><CAAh+rOp_4nEYV1WvMDocE2hjgp8GqrAMwEqDCk5AgtQxXj80jQ@mail.gmail.com></a>
Content-Type: text/plain; charset="utf-8"
Would dosbox help? I seem to remember it has a feature to set clock speed.
Chris KM4PUR
</pre>
<blockquote>
<pre>On May 15, 2016 8:32 PM, <a href="mailto:clowery@va.net">"clowery@va.net"</a> <a href="mailto:clowery@va.net"><clowery@va.net></a> wrote:
Try downloading and running MOSLO, we used to use it for commercial
software.
Charles Lowery, NM4V
Quoting David Marshall <a href="mailto:dozerboy0157@gmail.com"><dozerboy0157@gmail.com></a>:
</pre>
<blockquote>
<pre>I am using Windows 10. The problem as explained to me is Windows program
runs too fast . Radio cannot go into program mode fast enough before
program times out. Pavel wrote a patch that made program try 3 times
</pre>
</blockquote>
<pre>before
</pre>
<blockquote>
<pre>giving up. That still did not fix problem. I asked about a month ago if
</pre>
</blockquote>
<pre>any
</pre>
<blockquote>
<pre>solution had been found, no reply. The only other way is to locate an
</pre>
</blockquote>
<pre>older
</pre>
<blockquote>
<pre>model computer that can run original MSDOS based software. Ebay about
</pre>
</blockquote>
<pre>$130
</pre>
<blockquote>
<pre>plus price of software. Again good luck hate to toss my radio its in nice
shape. KC1EXK 73s.
</pre>
<blockquote>
<pre>On May 15, 2016 7:10 PM, "Tim Billingsley" <a href="mailto:kd5ckp@gmail.com"><kd5ckp@gmail.com></a> wrote:
On Sun, May 15, 2016 at 12:38 PM, David Marshall <
</pre>
</blockquote>
</blockquote>
<pre><a href="mailto:dozerboy0157@gmail.com">dozerboy0157@gmail.com</a>>
</pre>
<blockquote>
<blockquote>
<pre>wrote:
</pre>
<blockquote>
<pre>I have had the same issue with a 760H. Talked with Pavel. He seems to
think its a firmware issue that he has not resolved at this time. Good
luck. KC1EXK.
</pre>
</blockquote>
<pre>Also are any of the aforementioned issues OS related? If I locate a
Windows machine should I expect any better results?
_______________________________________________
chirp_users mailing list
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to David Marshall at <a href="mailto:dozerboy0157@gmail.com">dozerboy0157@gmail.com</a>
To unsubscribe, send an email to
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
</pre>
</blockquote>
</blockquote>
<pre>
_______________________________________________
chirp_users mailing list
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to Chris at <a href="mailto:chrispetry1971@gmail.com">chrispetry1971@gmail.com</a>
To unsubscribe, send an email to
<a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
</pre>
</blockquote>
<pre>-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160515/8477b901/attachment-0001.html">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160515/8477b901/attachment-0001.html</a>
------------------------------
Message: 5
Date: Mon, 16 May 2016 09:55:34 -0400
From: "Pavel Milanes (CO7WT)" <a href="mailto:pavelmc@gmail.com"><pavelmc@gmail.com></a>
Subject: Re: [chirp_users] Kenwood TK-762H
To: Discussion of CHIRP <a href="mailto:chirp_users@intrepid.danplanet.com"><chirp_users@intrepid.danplanet.com></a>
Message-ID: <a href="mailto:4abb5711-8ff2-ffd2-7498-d1aafd3250e9@gmail.com"><4abb5711-8ff2-ffd2-7498-d1aafd3250e9@gmail.com></a>
Content-Type: text/plain; charset="windows-1252"
Hi Tim and everybody,
I had a lot of work recently and was away for a while... and now I'm
paying attention to the new variants of the mobile
QYT/BTECH/Juentai/Sainsonic etc mobiles that are growing like grass in
the spring. (I'm in change of the communication procedures for that also...)
I will revisit the Kenwood TK-760 driver as soon as I can get free time,
sorry for the delay on solving this.
73.
El 15/05/16 a las 03:27, Tim Billingsley escribi?:
</pre>
<blockquote>
<pre>I have a couple of old Kenwood TK-762H transceivers. I see the issue
on <a href="http://chirp.danplanet.com/issues/3139">http://chirp.danplanet.com/issues/3139</a> but I seem to be having
troubles. When I attempt to read from the radio using TK-762G it
appears to read from the radio then dumps the error dialog *"An error
has occurred: The radio doesn't accept program mode"*
ERROR: -- Exception: --
ERROR: Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238,
in run
self.__radio.sync_in()
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py",
line 884, in sync_in
self._mmap = do_download(self)
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py",
line 517, in do_download
_open_radio(radio, status)
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py",
line 478, in _open_radio
raise errors.RadioError("The radio doesn't accept program mode")
RadioError: The radio doesn't accept program mode
ERROR: ----------------
ERROR: Clone failed: The radio doesn't accept program mode
ERROR: --- Exception Dialog: The radio doesn't accept program mode ---
ERROR: None
ERROR: ----------------------------
If I attempt using TK-760 chirp attmpts to read and almost immediately
dumps the error dialog saying *"An error has occurred Radio refuse to
enter into program mode after a few tries"*
ERROR: ----------------------------
ERROR: -- Exception: --
ERROR: Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238,
in run
self.__radio.sync_in()
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
411, in sync_in
self._mmap = do_download(self)
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
255, in do_download
open_radio(radio)
File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line
227, in open_radio
raise errors.RadioError(msg)
RadioError: Radio refuse to enter into program mode after a few tries
ERROR: ----------------
ERROR: Clone failed: Radio refuse to enter into program mode after a
few tries
ERROR: --- Exception Dialog: Radio refuse to enter into program mode
after a few tries ---
ERROR: None
ERROR: ----------------------------
FWIW I am running
CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-)
speed~1700 MHz (max)
Kernel~4.2.0-34-generic i686
Mem~2035.9/3635.1MB
HDD~750.2GB(35.9% used)
Ubuntu 15.10
CHIRP daily-20160513
GTK 2.24.28
PyGTK 2.24.0
Python 2.7.10
I am also having issues with a QTY KT8900
I have tried to follow all this has been discussed on
<a href="http://chirp.danplanet.com/issues/2673">http://chirp.danplanet.com/issues/2673</a> but to no avail.
any assistance is appreciated
_______________________________________________
chirp_users mailing list
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to M.Sc. Pavel Milanes Costa at <a href="mailto:pavelmc@gmail.com">pavelmc@gmail.com</a>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
</pre>
</blockquote>
<pre>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160516/668c729f/attachment-0001.html">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20160516/668c729f/attachment-0001.html</a>
------------------------------
_______________________________________________
chirp_users mailing list
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
End of chirp_users Digest, Vol 89, Issue 13
*******************************************
</pre>
</blockquote>
<pre>_______________________________________________
chirp_users mailing list
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
This message was sent to M.Sc. Pavel Milanes Costa at <a href="mailto:pavelmc@gmail.com">pavelmc@gmail.com</a>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a>
</pre>
</blockquote>
<br />
<pre>--
73 Pavel CO7WT.</pre>
</div>
</blockquote></div>