<p dir="ltr">So I made Y- harness per the wiring on the Miklor.com page. I've continuity checked it a thousand times and all I get is about 3 seconds of status bar, then, "radio didn't entered (sic) in the clone mode". I can connect fine with the same cable (no Y-harness) to my UV-82hp. I tried to attach a photo of the harness but it got rejected. Unless I'm reading the diagrams wrong, I don't know what the issue is. One wire going to the 3.5mm socket, 2 going to the 2.5mm socket, those 3 into the 3.5mm male. Am I missing something?</p>