<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">I'm not as fast as Jim Unroe, nor as knowledgeable, but hey, here's a 2nd opinion. :-) <br><br>Have you tried "Tone" instead of TSQL? <br>TSQL means it uses the tone for both RX & TX. <br>Tone is just for TX. <br>If you don't need the tone to RX (and you almost never actually NEED it, even if it is nice to help cut out stray noise), but you're using it, the TSQL will filter out the repeater so you can't hear it. <br><br>So I wonder if you're really not hitting the repeater, or if you just can't hear it coming back after you do open it. <br>Can you try TX with this radio as-is, while monitoring on a different radio that you know works with this repeater? I'm curious to know if the other radio hears you opening the repeater, but this one doesn't. <div>And then I would try using "Tone" instead of TSQL for this repeater. Actually, probably most of those repeaters on your list. <br><br><img height="108" width="1057" apple-width="yes" apple-height="yes" id="db758cf6-99aa-4fc0-9c85-e0e84d8d9783" src="cid:11A63705-85BD-4819-987E-E5E644E1E79A"><br><br><div>73,<br>Dave Nathanson<br>KG6ZJO<br><br><br>On Nov 9, 2015, at 4:45 PM, Lamar Brown <<a href="mailto:dlamarbrown@gmail.com">dlamarbrown@gmail.com</a>> wrote:<br><br>Ok Jim here is my file. Look at it and tell what I need to do then.<br><br>Thanks,<br><br>Lamar<br><br>On Mon, Nov 9, 2015 at 3:37 PM, Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>> wrote:<br>On Mon, Nov 9, 2015 at 3:56 PM, Lamar Brown <dlamarbrown@gmail.com> wrote:<br>> Jim<br>> I'm at work right now so it will be tonight before I can send you my file.<br>> So If I understand you right, for instance on a repeater that has the<br>> frequency of 146.640 and the offset frequency was 146.040 I would need to<br>> program them in then?<br>><br>><br><br>Danny,<br><br>Not exactly. You set Frequency="146.64000", Duplex="-" and<br>Offset="0.60000". Then from that supplied information, CHIRP will<br>compute the TX frequency (146.040) and store it along with the other<br>channel information. Then when you upload to the radio, 146.640 (RX<br>freq) and 146.040 (TX freq) are sent to the radio (along with the<br>other channel data) because that is what it requires.<br><br>Just to review, the radio's menu 25 [SFT-D] and menu 26 [OFFSET] only<br>function and have a purpose in VFO (frequency) mode. These menus have<br>absolutely no purpose (and therefor do not work) in MR (channel) mode.<br>So the upper status display only shows "+" and "-" individually when<br>the radio is in VFO mode. In MR mode the upper status display shows<br>"+-" to indicate the RX frequency and TX frequency are not the same.<br>It doesn't matter if you are programming the radio with CHIRP or the<br>keypad, that's how the radio works.<br><br>Jim KC9HI<br>_______________________________________________<br>chirp_users mailing list<br>chirp_users@intrepid.danplanet.com<br>http://intrepid.danplanet.com/mailman/listinfo/chirp_users<br>To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com<br><br></div></div></body></html>