<div dir="ltr">I went through the same thing a while ago and was not able to get Chirp to talk with my FT60. <div><br></div><div>Finally did the dance of pushing this button and so on and finally got the ZT-V68 software that came with my programming cable to work but it was not easy. </div><div><br></div><div>Feel that now that I know the sequence needed to get the FT-60 to work that the Chirp might work but without the proper sequence doubt it.</div><div><br></div><div>Joe A</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Apr 5, 2015 at 4:48 AM, James Baughn <span dir="ltr"><<a href="mailto:geek@jamesbaughn.com" target="_blank">geek@jamesbaughn.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I am using the cable from RT Systems to attach my FT60R to the system.<br>
When the cable is connected, Port /dev/ttyUSB0 is displayed. If the<br>
cable is not connected, no port is displayed in the radio box.<br>
However, using the method for which the RT System windows program uses,<br>
I get a time out on the Download procedure.<br>
The method used is turn the FT60R on holding the [Moni/TCall] key. The<br>
dial is rotated to CLONE. The [FW] key is pressed so CLONE blinks and<br>
comes back. The OK button is selected and the transfer should take place.<br>
<br>
Any ideas?<br>
<br>
Jim<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
To unsubscribe, send an email to <a href="mailto:chirp_users-unsubscribe@intrepid.danplanet.com">chirp_users-unsubscribe@intrepid.danplanet.com</a><br>
</blockquote></div><br></div>