<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On Mon, Mar 31, 2014 at 4:49 PM, Jim Hatch <span dir="ltr"><<a href="mailto:jamesdhatch@gmail.com" target="_blank">jamesdhatch@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">I'm trying to set the radios so that the same channels show up every time the operator turns the radio on regardless of what channels were tuned when it was turned off.<div>
<br></div><div>For example, I want channels 2 & 3 to always be in the A/B displays when powering on. The user turns it off when the radio is tuned to say channel 15 and 98. When they turn it back on it should revert to channels 2 & 3 in the display.</div>
<div><br></div><div>I tried setting the Work Mode Settings features MR A Channel and MR B Channels to 2 & 3 respectively. This did not default the power on settings to channels 2 & 3. </div><div><br></div><div>What am I doing wrong? (The radios are firmware BFB297 and BFS311 in Firmware Message 2 and Firmware Message 1 respectively.)</div>
<div><br></div><div>Thanks,</div><div>Jim</div></div>
</blockquote></div><br></div><div class="gmail_extra">Jim,</div><div class="gmail_extra"><br></div><div class="gmail_extra">You are doing nothing wrong. What you are asking can't be done. The radio will always power up in the state that it was in when it was powered off.</div>
<div class="gmail_extra"><br></div><div class="gmail_extra">Jim KC9HI</div></div>