<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">I have an FT-60 and you have to be
quick<br>
<br>
Here is the section from the manual on cloning.<br>
<br>
The FT-60R includes a convenient “Clone” feature, which allows the
memory and configuration<br>
data from one transceiver to be transferred to another FT-60R.
This can be<br>
particularly useful when configuring a number of transceivers for
a public service operation.<br>
Here is the procedure for Cloning one radio’s data to another:<br>
1. Turn both radios off.<br>
2. Connect the optional CT-27 Clone Cable between the MIC/SP jacks
of the two radios.<br>
3. Press and hold in the MONI switch (just below the PTT switch)
while turning the radios on. Do this for both radios (the order of
switch-on does not matter).<br>
4. Rotate the DIAL job on each radio to select to “F8 CLONE,” then
press the [F/W] key momentarily.<br>
5. The display will disappear for a moment, then the “CLONE”
notation will appear on the displays of both radios when the Clone
mode is successfully activated in this step.<br>
6. On the Destination radio, press the MONI switch (“- -RX- -”
will appear on the LCD).<br>
7. Press the PTT switch on the Source radio; “- -TX- -” will
appear on the Source radio, and the data from this radio will be
transferred to the other radio.<br>
8. If there is a problem during the cloning process, “ERROR” will
be displayed. Check your cable connections and battery voltage,
and try again.<br>
9. If the data transfer is successful, “CLONE” will reappear on
both displays. Turn both radios off and disconnect the cloning
cable. You can then turn the radios back on, and begin normal
operation.<br>
<br>
Loading the radio your radio will be the Destination radio, Follow
steps 1-5<br>
Then you have to be ready with Chirp to Upload to Radio.<br>
Press the MONI key on the radio (Step 6) <br>
Then quickly press the OK button on Chirp.<br>
<br>
<br>
<br>
On 3/1/2014 6:03 PM, G T wrote:<br>
</div>
<blockquote cite="mid:SNT148-W26E4A13F7FA253B8D04BD2EE8C0@phx.gbl"
type="cite">
<div dir="ltr">Greetings<br>
I believe this may have been answered however I could not find a
copy of the email.<br>
I have a FT 60 R I'm using CHIRP cable form Amazon, it has a
model TW-PCMYA1U and a number PCY1004 the Prolific driver is
3.4.62.293.<br>
Following he procedure It will read from the radio, populated
the CHIRP spread sheet but then on the upload it fails. A
message appears "Failed to communicate with the Radio. Radio did
not respond" I tried it a few times as per the video on You
tube. Do I need different driver?<br>
TNX<br>
73<br>
W7GUS<br>
<br>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 12pt;
font-family:Calibri
}
--></style>
<div dir="ltr"><font style="font-size:16pt;" size="4"
face="Garamond"><br id="FontBreak">
</font></div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
chirp_users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>
<a class="moz-txt-link-freetext" href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a>
</pre>
</blockquote>
<br>
</body>
</html>