<div dir="ltr"><div>Good morning ...</div><div> </div><div>1- On the xp when its works (before the virus )the cable was ok, so the</div><div> cable issue is ok( i think ).</div><div>2- I opend a two different com ( com3/com6 ) but the same result.</div>
<div> </div><div>Thanks</div><div> </div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Sat, Dec 15, 2012 at 9:10 PM, <span dir="ltr"><<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.danplanet.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send chirp_users mailing list submissions to<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of chirp_users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina)<br>
2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Sat, 15 Dec 2012 11:44:16 -0500<br>
From: "John LaMartina" <<a href="mailto:JohnLa@usa.net">JohnLa@usa.net</a>><br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID: <000601cddae3$6c632280$45296780$@net><br>
Content-Type: text/plain; charset="us-ascii"<br>
<br>
The error message indicates that your cable is not plugged in all the way.<br>
<br>
A common problem as Baofeng doesn't manufacture their own cables.<br>
<br>
See: <a href="http://www.miklor.com/uv5r/UV5R-ErrorMess.html" target="_blank">http://www.miklor.com/uv5r/UV5R-ErrorMess.html</a><br>
<br>
<br>
<br>
If you haven't already, check out the UV5R User's Guide<br>
<br>
<a href="http://www.miklor.com/uv5r/UserGuide" target="_blank">http://www.miklor.com/uv5r/UserGuide</a><br>
<br>
<br>
<br>
Enjoy your new Toy...<br>
<br>
John K3NXU<br>
<br>
<br>
<br>
From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a> [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a>] On Behalf Of Rafael Yerushalmi<br>
Sent: Saturday, December 15, 2012 10:38 AM<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
<br>
<br>
<br>
Hello there.<br>
<br>
<br>
<br>
I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0<br>
<br>
on win 7 becuse my computer have been with a virus but notning working with<br>
<br>
the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh .<br>
<br>
when i operte chrip after a few ceconds the messege is " Radio did not respond "<br>
<br>
on xp it was working good ...<br>
<br>
what is the setting for the com is it 1200 baud ? is it xon/xoff ?<br>
<br>
<br>
<br>
need your help<br>
<br>
<br>
<br>
best 73<br>
<br>
Thanks<br>
<br>
<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/6efb8f37/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/6efb8f37/attachment-0001.html</a><br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Sat, 15 Dec 2012 11:09:44 -0800<br>
From: "william coulson" <<a href="mailto:wcoulson730@gmail.com">wcoulson730@gmail.com</a>><br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
To: "Discussion of CHIRP" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID: <E5B1B60E83F0447E8CA3F4C068554DA1@williamcoulsPC><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
try a different COM PORT<br>
<br>
Bill<br>
----- Original Message -----<br>
From: Rafael Yerushalmi<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
Sent: Saturday, December 15, 2012 7:38 AM<br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
<br>
<br>
Hello there.<br>
<br>
<br>
I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0<br>
on win 7 becuse my computer have been with a virus but notning working with<br>
the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh .<br>
when i operte chrip after a few ceconds the messege is " Radio did not respond "<br>
on xp it was working good ...<br>
what is the setting for the com is it 1200 baud ? is it xon/xoff ?<br>
<br>
<br>
need your help<br>
<br>
<br>
best 73<br>
Thanks<br>
<br>
<br>
<br>
<br>
<br>
On Thu, Dec 13, 2012 at 10:00 PM, <<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a>> wrote:<br>
<br>
Send chirp_users mailing list submissions to<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of chirp_users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Ref: I need Help (WN6WJN - - Wassim)<br>
2. Re: Ref: I need Help (Bob Nielsen)<br>
3. Re: Ref: I need Help (Bobby Goins)<br>
4. Re: Ref: I need Help (Jim Unroe)<br>
5. Re: Ref: I need Help (Jim Unroe)<br>
6. Re: Ref: I need Help (IZ3GME Marco)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Wed, 12 Dec 2012 15:15:00 -0800<br>
From: WN6WJN - - Wassim <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>><br>
Subject: [chirp_users] Ref: I need Help<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
Message-ID:<br>
<CAPpvvnmuo+xvZuLdgKGcc-BzOhLS+ch1CSPP+=<a href="mailto:03ZG2RBaAqBg@mail.gmail.com">03ZG2RBaAqBg@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
Thanks Fred<br>
<br>
OK some more information.<br>
<br>
I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
<br>
I have the RT Systems USB cable for the FT60-R and an aftermarket USB cable<br>
for the UV-5R.<br>
<br>
I have installed the drivers for both above cables and verified the COM<br>
Port they are using. Both are COM4.<br>
<br>
I started CHIRP software, plugged in the RT Systems USB cable, held down<br>
the Moni key while turning on the FT60-R and the software responded with an<br>
error message stating:<br>
<br>
"An Error has occurred. Radio is not responding" with an OK button.<br>
<br>
Now I was told by a friend that the FT60-R has a problem conneting for the<br>
1st time, but it will be easier there after. But then what are the tricks<br>
that will make it easier to connect the first time?<br>
<br>
Thanks<br>
<br>
73<br>
<br>
Wassim<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/3e7ceb68/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/3e7ceb68/attachment-0001.html</a><br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Wed, 12 Dec 2012 15:41:59 -0800<br>
From: Bob Nielsen <<a href="mailto:n7xy@clearwire.net">n7xy@clearwire.net</a>><br>
Subject: Re: [chirp_users] Ref: I need Help<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID: <<a href="mailto:08EDC49F-60DD-4AEE-AD86-E38C0283327B@clearwire.net">08EDC49F-60DD-4AEE-AD86-E38C0283327B@clearwire.net</a>><br>
Content-Type: text/plain; charset=iso-8859-1<br>
<br>
You may need to plug in the cable before starting CHIRP, so it picks the correct driver.<br>
<br>
Bob, N7XY<br>
<br>
On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>> wrote:<br>
<br>
> Thanks Fred<br>
><br>
> OK some more information.<br>
><br>
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
><br>
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB cable for the UV-5R.<br>
><br>
> I have installed the drivers for both above cables and verified the COM Port they are using. Both are COM4.<br>
><br>
> I started CHIRP software, plugged in the RT Systems USB cable, held down the Moni key while turning on the FT60-R and the software responded with an error message stating:<br>
><br>
> "An Error has occurred. Radio is not responding" with an OK button.<br>
><br>
> Now I was told by a friend that the FT60-R has a problem conneting for the 1st time, but it will be easier there after. But then what are the tricks that will make it easier to connect the first time?<br>
><br>
> Thanks<br>
><br>
> 73<br>
><br>
> Wassim<br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
<br>
<br>
<br>
_____<br>
Licensed since 1952<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Wed, 12 Dec 2012 19:17:18 -0500<br>
From: Bobby Goins <<a href="mailto:goins0497@insightbb.com">goins0497@insightbb.com</a>><br>
Subject: Re: [chirp_users] Ref: I need Help<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID: <<a href="mailto:q62fty7w6ilhyd0n6vt0393n.1355356718821@email.android.com">q62fty7w6ilhyd0n6vt0393n.1355356718821@email.android.com</a>><br>
Content-Type: text/plain; charset=utf-8<br>
<br>
I unsuccessfully tried using a cheap aftermarket cord for my UV-5R+ on both Linux and Win7. I never could get the radio to communicate.<br>
<br>
I ended up purchasing a cord from Valley Enterprises (no relation with the company) and it worked. (No driver was needed for Linux. I did need to download a driver for Win7.)<br>
<br>
I believe the cord was originally for a Kenwood KPG-22 radio. (Valley's part# RPC-K1-UF.)<br>
<br>
---<br>
<br>
Now for something fun... get a female SMA to PL259 adapter, and run your Baofeng through a mobile antenna. You'll be happy! <grin><br>
<br>
<br>
<br>
<br>
<br>
Bob Nielsen <<a href="mailto:n7xy@clearwire.net">n7xy@clearwire.net</a>> wrote:<br>
<br>
>You may need to plug in the cable before starting CHIRP, so it picks the correct driver.<br>
><br>
>Bob, N7XY<br>
><br>
>On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>> wrote:<br>
><br>
>> Thanks Fred<br>
>><br>
>> OK some more information.<br>
>><br>
>> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
>><br>
>> I have the RT Systems USB cable for the FT60-R and an aftermarket USB cable for the UV-5R.<br>
>><br>
>> I have installed the drivers for both above cables and verified the COM Port they are using. Both are COM4.<br>
>><br>
>> I started CHIRP software, plugged in the RT Systems USB cable, held down the Moni key while turning on the FT60-R and the software responded with an error message stating:<br>
>><br>
>> "An Error has occurred. Radio is not responding" with an OK button.<br>
>><br>
>> Now I was told by a friend that the FT60-R has a problem conneting for the 1st time, but it will be easier there after. But then what are the tricks that will make it easier to connect the first time?<br>
>><br>
>> Thanks<br>
>><br>
>> 73<br>
>><br>
>> Wassim<br>
>> _______________________________________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
><br>
><br>
>_____<br>
>Licensed since 1952<br>
><br>
><br>
><br>
><br>
><br>
><br>
><br>
>_______________________________________________<br>
>chirp_users mailing list<br>
><a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
><a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Wed, 12 Dec 2012 19:28:17 -0500<br>
From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
Subject: Re: [chirp_users] Ref: I need Help<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID:<br>
<CADnO8U4S=EOR_42NM4gxysKTWNHbzUMS0=<a href="mailto:v1kwePFwuNLsTgVA@mail.gmail.com">v1kwePFwuNLsTgVA@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
V0.2.2 doesn't support the UV-5R. You need the latest daily build.<br>
Jim<br>
On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>> wrote:<br>
<br>
> Thanks Fred<br>
><br>
> OK some more information.<br>
><br>
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
><br>
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB<br>
> cable for the UV-5R.<br>
><br>
> I have installed the drivers for both above cables and verified the COM<br>
> Port they are using. Both are COM4.<br>
><br>
> I started CHIRP software, plugged in the RT Systems USB cable, held down<br>
> the Moni key while turning on the FT60-R and the software responded with an<br>
> error message stating:<br>
><br>
> "An Error has occurred. Radio is not responding" with an OK button.<br>
><br>
> Now I was told by a friend that the FT60-R has a problem conneting for the<br>
> 1st time, but it will be easier there after. But then what are the tricks<br>
> that will make it easier to connect the first time?<br>
><br>
> Thanks<br>
><br>
> 73<br>
><br>
> Wassim<br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0001.html</a><br>
<br>
------------------------------<br>
<br>
Message: 5<br>
Date: Wed, 12 Dec 2012 19:29:41 -0500<br>
From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
Subject: Re: [chirp_users] Ref: I need Help<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID:<br>
<<a href="mailto:CADnO8U6DAYeSuRdVOUukZ8fdeF5aFQcLYrBOT_JyQXZWAW8NZQ@mail.gmail.com">CADnO8U6DAYeSuRdVOUukZ8fdeF5aFQcLYrBOT_JyQXZWAW8NZQ@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
I meant to type v0.2.3. Sorry<br>
On Dec 12, 2012 7:28 PM, "Jim Unroe" <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>> wrote:<br>
<br>
> V0.2.2 doesn't support the UV-5R. You need the latest daily build.<br>
> Jim<br>
> On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>> wrote:<br>
><br>
>> Thanks Fred<br>
>><br>
>> OK some more information.<br>
>><br>
>> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
>><br>
>> I have the RT Systems USB cable for the FT60-R and an aftermarket USB<br>
>> cable for the UV-5R.<br>
>><br>
>> I have installed the drivers for both above cables and verified the COM<br>
>> Port they are using. Both are COM4.<br>
>><br>
>> I started CHIRP software, plugged in the RT Systems USB cable, held down<br>
>> the Moni key while turning on the FT60-R and the software responded with an<br>
>> error message stating:<br>
>><br>
>> "An Error has occurred. Radio is not responding" with an OK button.<br>
>><br>
>> Now I was told by a friend that the FT60-R has a problem conneting for<br>
>> the 1st time, but it will be easier there after. But then what are the<br>
>> tricks that will make it easier to connect the first time?<br>
>><br>
>> Thanks<br>
>><br>
>> 73<br>
>><br>
>> Wassim<br>
>><br>
>> _______________________________________________<br>
>> chirp_users mailing list<br>
>> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
>> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
>><br>
>><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/45a7f130/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/45a7f130/attachment-0001.html</a><br>
<br>
------------------------------<br>
<br>
Message: 6<br>
Date: Thu, 13 Dec 2012 10:02:17 +0100<br>
From: IZ3GME Marco <<a href="mailto:iz3gme.marco@gmail.com">iz3gme.marco@gmail.com</a>><br>
Subject: Re: [chirp_users] Ref: I need Help<br>
To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID: <<a href="mailto:50C99999.5080304@gmail.com">50C99999.5080304@gmail.com</a>><br>
Content-Type: text/plain; charset=windows-1252; format=flowed<br>
<br>
Hi Wassim<br>
<br>
My suspect is that you simply miss a step: after starting chirp download<br>
you should tell to the radio to start clone-tx (from FT60 userm manual):<br>
<br>
4. Rotate the DIAL job on each radio to select to ?F8 CLONE,?<br>
then press the [F/W] key momentarily.<br>
5. The display will disappear for a moment, then the ?CLONE?<br>
notation will appear on the displays of both radios when the<br>
Clone mode is successfully activated in this step.<br>
6. (don't do this!!!) On the Destination radio, press the MONI switch<br>
(?--RX- -? will appear on the LCD).<br>
7. Press the PTT switch on the Source radio; ?- -TX- -? will appear<br>
on the Source radio, and the data from this radio will be transferred to<br>
the other radio<br>
<br>
In a similar way when you'll have to "save" to FT60 you have to put the<br>
radio in clone rx following the same procedure as above but doing step 6<br>
and not step 7 before to start chirp upload.<br>
<br>
Hope this can help<br>
<br>
73 de IZ3GME Marco<br>
<br>
<br>
On 13/12/2012 00:15, WN6WJN - - Wassim wrote:<br>
> Thanks Fred<br>
><br>
> OK some more information.<br>
><br>
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
><br>
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB<br>
> cable for the UV-5R.<br>
><br>
> I have installed the drivers for both above cables and verified the COM<br>
> Port they are using. Both are COM4.<br>
><br>
> I started CHIRP software, plugged in the RT Systems USB cable, held down<br>
> the Moni key while turning on the FT60-R and the software responded with<br>
> an error message stating:<br>
><br>
> "An Error has occurred. Radio is not responding" with an OK button.<br>
><br>
> Now I was told by a friend that the FT60-R has a problem conneting for<br>
> the 1st time, but it will be easier there after. But then what are the<br>
> tricks that will make it easier to connect the first time?<br>
><br>
> Thanks<br>
><br>
> 73<br>
><br>
> Wassim<br>
><br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
<br>
<br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
<br>
<br>
End of chirp_users Digest, Vol 48, Issue 6<br>
******************************************<br>
<br>
<br>
<br>
<br>
<br>
<br>
--<br>
Best wishess for you !!! ( :<br>
<br>
Yerushalmi Rafael<br>
<br>
<br>
<br>
<br>
<br>
<br>
------------------------------------------------------------------------------<br>
<br>
<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/a1133cb5/attachment.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/a1133cb5/attachment.html</a><br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
<br>
<br>
End of chirp_users Digest, Vol 48, Issue 8<br>
******************************************<br>
</blockquote></div><br><br clear="all"><br>-- <br>Best wishess for you !!! ( : <br><br>Yerushalmi Rafael<br><br><br><br>
</div>