"The port appears to be a cable without Echo Loopback" is the correct indication of the programming cable using "FindComPort.exe"<br>Jim KC9HI<br><br><div class="gmail_quote">On Sun, Dec 16, 2012 at 12:28 PM, <span dir="ltr"><<a href="mailto:chirp_users-request@intrepid.danplanet.com" target="_blank">chirp_users-request@intrepid.danplanet.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Send chirp_users mailing list submissions to<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of chirp_users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: chirp_users Digest, Vol 48, Issue 11 (John LaMartina)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Sun, 16 Dec 2012 12:28:07 -0500<br>
From: "John LaMartina" <<a href="mailto:JohnLa@usa.net">JohnLa@usa.net</a>><br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11<br>
To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
Message-ID: <000c01cddbb2$b6fb0c20$24f12460$@net><br>
Content-Type: text/plain; charset="us-ascii"<br>
<br>
The fact that you have no loop back would indicate no physical connection to the board.<br>
This would point to a bad cable.<br>
<br>
<br>
<br>
Anyone else have thoughts on this?<br>
<br>
<br>
<br>
John K3NXU<br>
<br>
<br>
<br>
From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a> [mailto:<a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a>] On Behalf Of Rafael Yerushalmi<br>
Sent: Sunday, December 16, 2012 11:36 AM<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11<br>
<br>
<br>
<br>
Hello again...<br>
<br>
<br>
<br>
I run the sw` for finding the port & got the<br>
<br>
messege :"com3 this port appears to be a cable without echo loopback ".<br>
<br>
what does it main ?<br>
<br>
thanks<br>
<br>
<br>
<br>
On Sun, Dec 16, 2012 at 6:29 PM, <<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a>> wrote:<br>
<br>
Send chirp_users mailing list submissions to<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
or, via email, send a message with subject or body 'help' to<br>
<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
<br>
You can reach the person managing the list at<br>
<a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of chirp_users digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Re: chirp_users Digest, Vol 48, Issue 10 (Rafael Yerushalmi)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Sun, 16 Dec 2012 18:29:05 +0200<br>
From: Rafael Yerushalmi <<a href="mailto:rafaely10@gmail.com">rafaely10@gmail.com</a>><br>
Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 10<br>
To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
Message-ID:<br>
<CALiBrY6mzeR=nWWAPKTaQp4=<a href="mailto:VxpNWLToo25V3Uc9Coz3kcz7YA@mail.gmail.com">VxpNWLToo25V3Uc9Coz3kcz7YA@mail.gmail.com</a>><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
Hello there.<br>
I upload again the driver 3.2.0.0 for the usb port com3 & also<br>
give slight trimming of the cable plug side .<br>
but the same messege.<br>
thanks<br>
<br>
<br>
On Sun, Dec 16, 2012 at 3:46 PM, <<a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
> wrote:<br>
<br>
> Send chirp_users mailing list submissions to<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
><br>
> To subscribe or unsubscribe via the World Wide Web, visit<br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> or, via email, send a message with subject or body 'help' to<br>
> <a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
><br>
> You can reach the person managing the list at<br>
> <a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a><br>
><br>
> When replying, please edit your Subject line so it is more specific<br>
> than "Re: Contents of chirp_users digest..."<br>
><br>
><br>
> Today's Topics:<br>
><br>
> 1. Re: chirp_users Digest, Vol 48, Issue 8 (John LaMartina)<br>
><br>
><br>
> ----------------------------------------------------------------------<br>
><br>
> Message: 1<br>
> Date: Sun, 16 Dec 2012 08:45:53 -0500<br>
> From: "John LaMartina" <<a href="mailto:JohnLa@usa.net">JohnLa@usa.net</a>><br>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8<br>
> To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <000f01cddb93$ab59d8c0$020d8a40$@net><br>
> Content-Type: text/plain; charset="us-ascii"<br>
><br>
> If the cable is okay. the next step would be the driver.<br>
><br>
> You mentioned using 3.2.0.0 which is correct for Windows 7. (XP<br>
> automatically runs the correct driver)<br>
><br>
><br>
><br>
> However, if you now plug the cable into a different USB port, Windows will<br>
> load the NEW driver for that port, not 3.2.0.0<br>
><br>
> Below you mention com6 and com3 so it appears you are moving the cable<br>
> from USB to USB.<br>
><br>
> You will need to return to the original USB port or reload 3.2.0.0 to the<br>
> new one.<br>
><br>
><br>
><br>
> Check out the FAQ section at the bottom of this link.<br>
><br>
> <a href="http://www.miklor.com/uv5r/UV5R-Drivers.html" target="_blank">http://www.miklor.com/uv5r/UV5R-Drivers.html</a><br>
><br>
><br>
><br>
> Let us know if this helps.<br>
><br>
> John K3NXU<br>
><br>
><br>
><br>
><br>
><br>
> From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a> [mailto:<br>
> <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a>] On Behalf Of Rafael Yerushalmi<br>
> Sent: Sunday, December 16, 2012 1:04 AM<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8<br>
><br>
><br>
><br>
> Good morning ...<br>
><br>
><br>
><br>
> 1- On the xp when its works (before the virus )the cable was ok, so the<br>
><br>
> cable issue is ok( i think ).<br>
><br>
> 2- I opend a two different com ( com3/com6 ) but the same result.<br>
><br>
><br>
><br>
> Thanks<br>
><br>
><br>
><br>
> On Sat, Dec 15, 2012 at 9:10 PM, <<br>
> <a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a>> wrote:<br>
><br>
> Send chirp_users mailing list submissions to<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
><br>
> To subscribe or unsubscribe via the World Wide Web, visit<br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> or, via email, send a message with subject or body 'help' to<br>
> <a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
><br>
> You can reach the person managing the list at<br>
> <a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a><br>
><br>
> When replying, please edit your Subject line so it is more specific<br>
> than "Re: Contents of chirp_users digest..."<br>
><br>
><br>
> Today's Topics:<br>
><br>
> 1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina)<br>
> 2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson)<br>
><br>
><br>
> ----------------------------------------------------------------------<br>
><br>
> Message: 1<br>
> Date: Sat, 15 Dec 2012 11:44:16 -0500<br>
> From: "John LaMartina" <<a href="mailto:JohnLa@usa.net">JohnLa@usa.net</a>><br>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
> To: "'Discussion of CHIRP'" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <000601cddae3$6c632280$45296780$@net><br>
> Content-Type: text/plain; charset="us-ascii"<br>
><br>
> The error message indicates that your cable is not plugged in all the way.<br>
> A common problem as Baofeng doesn't manufacture their own cables.<br>
> See: <a href="http://www.miklor.com/uv5r/UV5R-ErrorMess.html" target="_blank">http://www.miklor.com/uv5r/UV5R-ErrorMess.html</a><br>
><br>
> If you haven't already, check out the UV5R User's Guide<br>
> <a href="http://www.miklor.com/uv5r/UserGuide" target="_blank">http://www.miklor.com/uv5r/UserGuide</a><br>
><br>
> Enjoy your new Toy...<br>
> John K3NXU<br>
><br>
><br>
> From: <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a> [mailto:<br>
> <a href="mailto:chirp_users-bounces@intrepid.danplanet.com">chirp_users-bounces@intrepid.danplanet.com</a>] On Behalf Of Rafael Yerushalmi<br>
> Sent: Saturday, December 15, 2012 10:38 AM<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
><br>
> Hello there.<br>
><br>
> I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0<br>
> on win 7 becuse my computer have been with a virus but notning working with<br>
> the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh .<br>
> when I operate chirp after a few seconds the message is " Radio did not<br>
> respond "<br>
> on xp it was working good ...<br>
> what is the setting for the com is it 1200 baud ? is it xon/xoff ?<br>
><br>
> Need your help<br>
><br>
> best 73<br>
> Thanks<br>
><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/6efb8f37/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/6efb8f37/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 2<br>
> Date: Sat, 15 Dec 2012 11:09:44 -0800<br>
> From: "william coulson" <<a href="mailto:wcoulson730@gmail.com">wcoulson730@gmail.com</a>><br>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
> To: "Discussion of CHIRP" <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <E5B1B60E83F0447E8CA3F4C068554DA1@williamcoulsPC><br>
> Content-Type: text/plain; charset="iso-8859-1"<br>
><br>
> try a different COM PORT<br>
><br>
> Bill<br>
> ----- Original Message -----<br>
> From: Rafael Yerushalmi<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> Sent: Saturday, December 15, 2012 7:38 AM<br>
> Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6<br>
><br>
><br>
> Hello there.<br>
><br>
><br>
> I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0<br>
> on win 7 becuse my computer have been with a virus but notning working<br>
> with<br>
> the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh .<br>
> when i operte chrip after a few ceconds the messege is " Radio did not<br>
> respond "<br>
> on xp it was working good ...<br>
> what is the setting for the com is it 1200 baud ? is it xon/xoff ?<br>
> need your help<br>
><br>
> best 73<br>
> Thanks<br>
><br>
><br>
><br>
> On Thu, Dec 13, 2012 at 10:00 PM, <<br>
> <a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a>> wrote:<br>
><br>
> Send chirp_users mailing list submissions to<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
><br>
> To subscribe or unsubscribe via the World Wide Web, visit<br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> or, via email, send a message with subject or body 'help' to<br>
> <a href="mailto:chirp_users-request@intrepid.danplanet.com">chirp_users-request@intrepid.danplanet.com</a><br>
><br>
> You can reach the person managing the list at<br>
> <a href="mailto:chirp_users-owner@intrepid.danplanet.com">chirp_users-owner@intrepid.danplanet.com</a><br>
><br>
> When replying, please edit your Subject line so it is more specific<br>
> than "Re: Contents of chirp_users digest..."<br>
><br>
><br>
> Today's Topics:<br>
><br>
> 1. Ref: I need Help (WN6WJN - - Wassim)<br>
> 2. Re: Ref: I need Help (Bob Nielsen)<br>
> 3. Re: Ref: I need Help (Bobby Goins)<br>
> 4. Re: Ref: I need Help (Jim Unroe)<br>
> 5. Re: Ref: I need Help (Jim Unroe)<br>
> 6. Re: Ref: I need Help (IZ3GME Marco)<br>
><br>
><br>
> ----------------------------------------------------------------------<br>
><br>
> Message: 1<br>
> Date: Wed, 12 Dec 2012 15:15:00 -0800<br>
> From: WN6WJN - - Wassim <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>><br>
> Subject: [chirp_users] Ref: I need Help<br>
> To: <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> Message-ID:<br>
> <CAPpvvnmuo+xvZuLdgKGcc-BzOhLS+ch1CSPP+=<br>
> <a href="mailto:03ZG2RBaAqBg@mail.gmail.com">03ZG2RBaAqBg@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="iso-8859-1"<br>
><br>
> Thanks Fred<br>
><br>
> OK some more information.<br>
><br>
> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
><br>
> I have the RT Systems USB cable for the FT60-R and an aftermarket USB<br>
> cable<br>
> for the UV-5R.<br>
><br>
> I have installed the drivers for both above cables and verified the COM<br>
> Port they are using. Both are COM4.<br>
><br>
> I started CHIRP software, plugged in the RT Systems USB cable, held<br>
> down<br>
> the Moni key while turning on the FT60-R and the software responded<br>
> with an<br>
> error message stating:<br>
><br>
> "An Error has occurred. Radio is not responding" with an OK button.<br>
><br>
> Now I was told by a friend that the FT60-R has a problem conneting for<br>
> the<br>
> 1st time, but it will be easier there after. But then what are the<br>
> tricks<br>
> that will make it easier to connect the first time?<br>
><br>
> Thanks<br>
><br>
> 73<br>
><br>
> Wassim<br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/3e7ceb68/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/3e7ceb68/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 2<br>
> Date: Wed, 12 Dec 2012 15:41:59 -0800<br>
> From: Bob Nielsen <<a href="mailto:n7xy@clearwire.net">n7xy@clearwire.net</a>><br>
> Subject: Re: [chirp_users] Ref: I need Help<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:08EDC49F-60DD-4AEE-AD86-E38C0283327B@clearwire.net">08EDC49F-60DD-4AEE-AD86-E38C0283327B@clearwire.net</a>><br>
> Content-Type: text/plain; charset=iso-8859-1<br>
><br>
> You may need to plug in the cable before starting CHIRP, so it picks<br>
> the correct driver.<br>
><br>
> Bob, N7XY<br>
><br>
> On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>><br>
> wrote:<br>
><br>
> > Thanks Fred<br>
> ><br>
> > OK some more information.<br>
> ><br>
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
> ><br>
> > I have the RT Systems USB cable for the FT60-R and an aftermarket<br>
> USB cable for the UV-5R.<br>
> ><br>
> > I have installed the drivers for both above cables and verified the<br>
> COM Port they are using. Both are COM4.<br>
> ><br>
> > I started CHIRP software, plugged in the RT Systems USB cable, held<br>
> down the Moni key while turning on the FT60-R and the<br>
> software responded with an error message stating:<br>
> ><br>
> > "An Error has occurred. Radio is not responding" with an OK button.<br>
> ><br>
> > Now I was told by a friend that the FT60-R has a problem conneting<br>
> for the 1st time, but it will be easier there after. But<br>
> then what are the tricks that will make it easier to connect the first<br>
> time?<br>
> ><br>
> > Thanks<br>
> ><br>
> > 73<br>
> ><br>
> > Wassim<br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
><br>
><br>
> _____<br>
> Licensed since 1952<br>
> ------------------------------<br>
> Message: 3<br>
> Date: Wed, 12 Dec 2012 19:17:18 -0500<br>
> From: Bobby Goins <<a href="mailto:goins0497@insightbb.com">goins0497@insightbb.com</a>><br>
> Subject: Re: [chirp_users] Ref: I need Help<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:q62fty7w6ilhyd0n6vt0393n.1355356718821@email.android.com">q62fty7w6ilhyd0n6vt0393n.1355356718821@email.android.com</a>><br>
> Content-Type: text/plain; charset=utf-8<br>
><br>
> I unsuccessfully tried using a cheap aftermarket cord for my UV-5R+ on<br>
> both Linux and Win7. I never could get the radio to<br>
> communicate.<br>
><br>
> I ended up purchasing a cord from Valley Enterprises (no relation with<br>
> the company) and it worked. (No driver was needed for<br>
> Linux. I did need to download a driver for Win7.)<br>
><br>
> I believe the cord was originally for a Kenwood KPG-22 radio.<br>
> (Valley's part# RPC-K1-UF.)<br>
> ---<br>
> Now for something fun... get a female SMA to PL259 adapter, and run<br>
> your Baofeng through a mobile antenna. You'll be happy!<br>
> <grin><br>
><br>
><br>
><br>
><br>
> Bob Nielsen <<a href="mailto:n7xy@clearwire.net">n7xy@clearwire.net</a>> wrote:<br>
><br>
> >You may need to plug in the cable before starting CHIRP, so it picks<br>
> the correct driver.<br>
> ><br>
> >Bob, N7XY<br>
> ><br>
> >On Dec 12, 2012, at 3:15 PM, WN6WJN - - Wassim <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>><br>
> wrote:<br>
> ><br>
> >> Thanks Fred<br>
> >><br>
> >> OK some more information.<br>
> >><br>
> >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
> >><br>
> >> I have the RT Systems USB cable for the FT60-R and an aftermarket<br>
> USB cable for the UV-5R.<br>
> >><br>
> >> I have installed the drivers for both above cables and verified the<br>
> COM Port they are using. Both are COM4.<br>
> >><br>
> >> I started CHIRP software, plugged in the RT Systems USB cable, held<br>
> down the Moni key while turning on the FT60-R and the<br>
> software responded with an error message stating:<br>
> >><br>
> >> "An Error has occurred. Radio is not responding" with an OK button.<br>
> >><br>
> >> Now I was told by a friend that the FT60-R has a problem conneting<br>
> for the 1st time, but it will be easier there after. But<br>
> then what are the tricks that will make it easier to connect the first<br>
> time?<br>
> >><br>
> >> Thanks<br>
> >><br>
> >> 73<br>
> >><br>
> >> Wassim<br>
> >> _______________________________________________<br>
> >> chirp_users mailing list<br>
> >> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> ><br>
> ><br>
> ><br>
> >_____<br>
> >Licensed since 1952<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> >_______________________________________________<br>
> >chirp_users mailing list<br>
> ><a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> ><a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 4<br>
> Date: Wed, 12 Dec 2012 19:28:17 -0500<br>
> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
> Subject: Re: [chirp_users] Ref: I need Help<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <CADnO8U4S=EOR_42NM4gxysKTWNHbzUMS0=<br>
> <a href="mailto:v1kwePFwuNLsTgVA@mail.gmail.com">v1kwePFwuNLsTgVA@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="iso-8859-1"<br>
><br>
> V0.2.2 doesn't support the UV-5R. You need the latest daily build.<br>
> Jim<br>
> On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>> wrote:<br>
><br>
> > Thanks Fred<br>
> ><br>
> > OK some more information.<br>
> ><br>
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
> ><br>
> > I have the RT Systems USB cable for the FT60-R and an aftermarket USB<br>
> > cable for the UV-5R.<br>
> ><br>
> > I have installed the drivers for both above cables and verified the<br>
> COM<br>
> > Port they are using. Both are COM4.<br>
> ><br>
> > I started CHIRP software, plugged in the RT Systems USB cable, held<br>
> down<br>
> > the Moni key while turning on the FT60-R and the software responded<br>
> with an<br>
> > error message stating:<br>
> ><br>
> > "An Error has occurred. Radio is not responding" with an OK button.<br>
> ><br>
> > Now I was told by a friend that the FT60-R has a problem conneting<br>
> for the<br>
> > 1st time, but it will be easier there after. But then what are the<br>
> tricks<br>
> > that will make it easier to connect the first time?<br>
> ><br>
> > Thanks<br>
> ><br>
> > 73<br>
> ><br>
> > Wassim<br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> ><br>
> ><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/f4be35aa/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 5<br>
> Date: Wed, 12 Dec 2012 19:29:41 -0500<br>
> From: Jim Unroe <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>><br>
> Subject: Re: [chirp_users] Ref: I need Help<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID:<br>
> <<br>
> <a href="mailto:CADnO8U6DAYeSuRdVOUukZ8fdeF5aFQcLYrBOT_JyQXZWAW8NZQ@mail.gmail.com">CADnO8U6DAYeSuRdVOUukZ8fdeF5aFQcLYrBOT_JyQXZWAW8NZQ@mail.gmail.com</a>><br>
> Content-Type: text/plain; charset="iso-8859-1"<br>
><br>
> I meant to type v0.2.3. Sorry<br>
> On Dec 12, 2012 7:28 PM, "Jim Unroe" <<a href="mailto:rock.unroe@gmail.com">rock.unroe@gmail.com</a>> wrote:<br>
><br>
> > V0.2.2 doesn't support the UV-5R. You need the latest daily build.<br>
> > Jim<br>
> > On Dec 12, 2012 6:15 PM, "WN6WJN - - Wassim" <<a href="mailto:wn6wjn@gmail.com">wn6wjn@gmail.com</a>><br>
> wrote:<br>
> ><br>
> >> Thanks Fred<br>
> >><br>
> >> OK some more information.<br>
> >><br>
> >> I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
> >><br>
> >> I have the RT Systems USB cable for the FT60-R and an aftermarket<br>
> USB<br>
> >> cable for the UV-5R.<br>
> >><br>
> >> I have installed the drivers for both above cables and verified the<br>
> COM<br>
> >> Port they are using. Both are COM4.<br>
> >><br>
> >> I started CHIRP software, plugged in the RT Systems USB cable, held<br>
> down<br>
> >> the Moni key while turning on the FT60-R and the software responded<br>
> with an<br>
> >> error message stating:<br>
> >><br>
> >> "An Error has occurred. Radio is not responding" with an OK button.<br>
> >><br>
> >> Now I was told by a friend that the FT60-R has a problem conneting<br>
> for<br>
> >> the 1st time, but it will be easier there after. But then what are<br>
> the<br>
> >> tricks that will make it easier to connect the first time?<br>
> >><br>
> >> Thanks<br>
> >><br>
> >> 73<br>
> >><br>
> >> Wassim<br>
> >><br>
> >> _______________________________________________<br>
> >> chirp_users mailing list<br>
> >> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> >> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> >><br>
> >><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/45a7f130/attachment-0001.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121212/45a7f130/attachment-0001.html</a><br>
><br>
> ------------------------------<br>
><br>
> Message: 6<br>
> Date: Thu, 13 Dec 2012 10:02:17 +0100<br>
> From: IZ3GME Marco <<a href="mailto:iz3gme.marco@gmail.com">iz3gme.marco@gmail.com</a>><br>
> Subject: Re: [chirp_users] Ref: I need Help<br>
> To: Discussion of CHIRP <<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a>><br>
> Message-ID: <<a href="mailto:50C99999.5080304@gmail.com">50C99999.5080304@gmail.com</a>><br>
> Content-Type: text/plain; charset=windows-1252; format=flowed<br>
><br>
> Hi Wassim<br>
><br>
> My suspect is that you simply miss a step: after starting chirp<br>
> download<br>
> you should tell to the radio to start clone-tx (from FT60 userm<br>
> manual):<br>
><br>
> 4. Rotate the DIAL job on each radio to select to ?F8 CLONE,?<br>
> then press the [F/W] key momentarily.<br>
> 5. The display will disappear for a moment, then the ?CLONE?<br>
> notation will appear on the displays of both radios when the<br>
> Clone mode is successfully activated in this step.<br>
> 6. (don't do this!!!) On the Destination radio, press the MONI switch<br>
> (?--RX- -? will appear on the LCD).<br>
> 7. Press the PTT switch on the Source radio; ?- -TX- -? will appear<br>
> on the Source radio, and the data from this radio will be transferred<br>
> to<br>
> the other radio<br>
><br>
> In a similar way when you'll have to "save" to FT60 you have to put the<br>
> radio in clone rx following the same procedure as above but doing step<br>
> 6<br>
> and not step 7 before to start chirp upload.<br>
><br>
> Hope this can help<br>
><br>
> 73 de IZ3GME Marco<br>
><br>
><br>
> On 13/12/2012 00:15, WN6WJN - - Wassim wrote:<br>
> > Thanks Fred<br>
> ><br>
> > OK some more information.<br>
> ><br>
> > I have CHIRP Version 0.2.3 installed on a Windows 7 64bit machine.<br>
> ><br>
> > I have the RT Systems USB cable for the FT60-R and an aftermarket USB<br>
> > cable for the UV-5R.<br>
> ><br>
> > I have installed the drivers for both above cables and verified the<br>
> COM<br>
> > Port they are using. Both are COM4.<br>
> ><br>
> > I started CHIRP software, plugged in the RT Systems USB cable, held<br>
> down<br>
> > the Moni key while turning on the FT60-R and the software responded<br>
> with<br>
> > an error message stating:<br>
> ><br>
> > "An Error has occurred. Radio is not responding" with an OK button.<br>
> ><br>
> > Now I was told by a friend that the FT60-R has a problem conneting<br>
> for<br>
> > the 1st time, but it will be easier there after. But then what are<br>
> the<br>
> > tricks that will make it easier to connect the first time?<br>
> ><br>
> > Thanks<br>
> ><br>
> > 73<br>
> ><br>
> > Wassim<br>
> ><br>
> ><br>
> > _______________________________________________<br>
> > chirp_users mailing list<br>
> > <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> > <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> ><br>
><br>
><br>
><br>
> ------------------------------<br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
><br>
> End of chirp_users Digest, Vol 48, Issue 6<br>
> ******************************************<br>
><br>
><br>
><br>
><br>
><br>
><br>
> --<br>
> Best wishess for you !!! ( :<br>
><br>
> Yerushalmi Rafael<br>
><br>
><br>
><br>
><br>
><br>
><br>
><br>
> ------------------------------------------------------------------------------<br>
><br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/a1133cb5/attachment.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121215/a1133cb5/attachment.html</a><br>
><br>
> ------------------------------<br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
><br>
> End of chirp_users Digest, Vol 48, Issue 8<br>
> ******************************************<br>
><br>
><br>
><br>
><br>
> --<br>
> Best wishess for you !!! ( :<br>
><br>
> Yerushalmi Rafael<br>
><br>
><br>
><br>
><br>
> -------------- next part --------------<br>
> An HTML attachment was scrubbed...<br>
> URL:<br>
> <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/ee813b49/attachment.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/ee813b49/attachment.html</a><br>
><br>
> ------------------------------<br>
><br>
> _______________________________________________<br>
> chirp_users mailing list<br>
> <a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
> <a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
><br>
><br>
> End of chirp_users Digest, Vol 48, Issue 10<br>
> *******************************************<br>
><br>
<br>
<br>
<br>
--<br>
Best wishess for you !!! ( :<br>
<br>
Yerushalmi Rafael<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/f93f9612/attachment.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/f93f9612/attachment.html</a><br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
<br>
<br>
End of chirp_users Digest, Vol 48, Issue 11<br>
*******************************************<br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
--<br>
Best wishess for you !!! ( :<br>
<br>
Yerushalmi Rafael<br>
<br>
<br>
<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <a href="http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/7386767f/attachment.html" target="_blank">http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20121216/7386767f/attachment.html</a><br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
chirp_users mailing list<br>
<a href="mailto:chirp_users@intrepid.danplanet.com">chirp_users@intrepid.danplanet.com</a><br>
<a href="http://intrepid.danplanet.com/mailman/listinfo/chirp_users" target="_blank">http://intrepid.danplanet.com/mailman/listinfo/chirp_users</a><br>
<br>
<br>
End of chirp_users Digest, Vol 48, Issue 13<br>
*******************************************<br>
</blockquote></div><br>