[chirp_users] Programing Cable Drivers

[charlesdland]

Programming seems to work ok. Can download from the radio, make changes and upload successfully. Using a.usb cable on win 10 with latest chirp update.  Just no xmit. Receive works ok. Will try downloafing from another radio same model and uploading to this one and see if I get lucky.
-------- Original message --------From: Tony Ling <tonyg7txu at gmail.com> Date: 5/31/23  5:44 AM  (GMT-06:00) To: Discussion of CHIRP <chirp_users at intrepid.danplanet.com> Subject: Re: [chirp_users] Programing Cable Drivers That is only true of Prolific drivers under windows.On Wed, 31 May 2023 at 09:33, Amnon Zohar <amnon.zohar at gmail.com> wrote:Sometime the cable needs an older driver to perform.בתאריך יום ג׳, 30 במאי 2023, 21:16, מאת Stephen Hersey ‏<n1xnxham at gmail.com>:This bit might not be obvious; if your operating system recognizes the cable as a serial COM port device, that's all you need on the OS side. After that, it's a matter of telling CHIRP what radio and what COM port to use.Steve-- Steve Hersey N1XNX n1xnxham at gmail.com-----"Any sufficiently advanced technology is indistinguishable from magic." -- Clarke's Third Law"Any technology distinguishable from magic is insufficiently advanced." -- Benford's Corollary"Any sufficiently advanced magic is indistinguishable from technology." -- Charles Stross, Dead Lies Dreaming“It's still magic even if you know how it's done.” -- Terry Pratchett
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Tony Ling at tonyg7txu at gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230531/62205281/attachment.html