[chirp_users] Programing Cable Drivers

Amnon Zohar
Wed May 31 01:33:08 PDT 2023


Sometime the cable needs an older driver to perform.

בתאריך יום ג׳, 30 במאי 2023, 21:16, מאת Stephen Hersey ‏<n1xnxham at gmail.com
>:

> This bit might not be obvious; if your operating system recognizes the
> cable as a serial COM port device, that's all you need on the OS side.
> After that, it's a matter of telling CHIRP what radio and what COM port to
> use.
>
> Steve
>
> --
> Steve Hersey N1XNX
> n1xnxham at gmail.com
> -----
> "Any sufficiently advanced technology is indistinguishable from magic." --
> Clarke's Third Law
> "Any technology distinguishable from magic is insufficiently advanced." --
> Benford's Corollary
> "Any sufficiently advanced magic is indistinguishable from technology." --
> Charles Stross, *Dead Lies Dreaming*
> “It's still magic even if you know how it's done.” -- Terry Pratchett
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to amnon at amnon.zohar at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230531/41a9c9e9/attachment.html 


More information about the chirp_users mailing list