[chirp_users] Can't connect to BTECH UV-25X2-Gen2

[John Oliver]

I hear nothing.  No sign that anything is being received.

On Sat, Jul 15, 2023 at 9:22 PM K0LNY <glenn at ervin.email> wrote:

> Hi John,
> Might the tuned frequency be receiving traffic while you are connected?
>
> If so, make sure it's on a quiet channel.
> HTH.
> Glenn
> ----- Original Message -----
> *From:* John Oliver <jnojr1 at gmail.com>
> *To:* chirp_users at intrepid.danplanet.com
> *Sent:* Saturday, July 15, 2023 4:54 PM
> *Subject:* [chirp_users] Can't connect to BTECH UV-25X2-Gen2
>
> I get "Error reading data from radio"  I'm using this cable:
> https://www.amazon.com/dp/B017MT7IFG  It is plugged in all the way!
>
> I cannot find a debug.log  There is no option for one in my CHIRP  (CHIRP
> next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets
> 3.0.4)  And none is created in ~/.chirp  While CHIRP is still running:
>
> joliver at blinky:~$ ls .chirp/
> chirp.config  stock_configs
>
> In the terminal I launched CHIRP:
>
> joliver at blinky:~$ ./.local/bin/chirp
> 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string
> ignored.
> ERROR: Failed to clone: Error reading data from radio
> Traceback (most recent call last):
>   File
> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py",
> line 369, in _rawrecv
>     raise errors.RadioError("No data received from radio")
> chirp.errors.RadioError: No data received from radio
>
> During handling of the above exception, another exception occurred:
>
> Traceback (most recent call last):
>   File
> "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py",
> line 68, in run
>     self._fn()
>   File
> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py",
> line 758, in sync_in
>     data = _download(self)
>   File
> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py",
> line 533, in _download
>     _do_ident(radio, status)
>   File
> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py",
> line 447, in _do_ident
>     ident = _rawrecv(radio, 50)
>   File
> "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py",
> line 377, in _rawrecv
>     raise errors.RadioError("Error reading data from radio")
> chirp.errors.RadioError: Error reading data from radio
>
>
> ------------------------------
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to K0LNY at glenn at ervin.email
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to John Oliver at jnojr1 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230716/788bea5f/attachment.html