[chirp_users] Importing a CSV file into the memory of an AlincoDJ-G7T

[K0LNY_Glenn]

Hi Stuart,
Under "file" is "import", I think alt I is the keyboard shortcut.
Browse to your CSV file and let it import.
HTH.
Glenn

----- Original Message ----- 
From: "Stuart Longland VK4MSL via chirp_users" 
<chirp_users at intrepid.danplanet.com>
To: <chirp_users at intrepid.danplanet.com>
Sent: Thursday, January 12, 2023 9:25 PM
Subject: [chirp_users] Importing a CSV file into the memory of an 
AlincoDJ-G7T


Hi all,

Has anyone had any luck loading a CSV file into an Alinco DJ-G7T.  I
have organised a list of FM repeaters for 2m/70cm/23cm from the WIA
repeater data spreadsheet.

I won't publish it here, but suffice to say, it's more than I want to
try and punch in via the keypad.  556 records.

First problem is getting Chirp to even talk to the DJ-G7T.  I have no
idea what firmware it runs.  I went looking in its menus but could not
find where this information is shown.  All I can say is I bought this
from a online retailer (Andrews Communications) in Sydney around 2020.

I am running the latest commit of Chirp: commit
49698a5b21a5a696be7f2121bc3ec8f4605b5b0c on Gentoo Linux AMD64 with
Python 3.10.6, wxpython 4.0.7-r2 and wxgtk 3.0.5.1.  Gentoo no longer
ship Python 2.7.  No I do not have a Windows-based PC as I don't use
legacy operating systems for production work.

To even get Chirp to talk to the Alinco, I needed to patch it (I think
this will preclude me using a pre-made "binary"):

diff --git a/chirp/drivers/alinco.py b/chirp/drivers/alinco.py
index 7bfffa39..b3350653 100644
--- a/chirp/drivers/alinco.py
+++ b/chirp/drivers/alinco.py
@@ -595,7 +595,7 @@ class AlincoDJG7EG(AlincoStyleRadio):
     TMODES = ["", "??1", "Tone", "TSQL", "TSQL-R", "DTCS"]

     # This is a bit of a hack to avoid overwriting _identify()
-    _model = b"AL~DJ-G7EG"
+    _model = b"AL~DJ-G7T"
     _memsize = 0x1a7c0
     _range = [(500000, 1300000000)]

I was then able to download an image file from the radio.

If I load up my CSV file, the upload option is greyed out.  So clearly
I don't directly open the CSV file, I have to "import" it somehow.

If I try to copy the repeaters into the image from the radio, even just
one repeater, Chirp segfaults.  So clearly it's not a matter of copy
and paste.

How does one import a CSV file into an existing radio image?
-- 
Stuart Longland (aka Redhatter, VK4MSL)

I haven't lost my mind...
  ...it's backed up on a tape somewhere.
_______________________________________________
chirp_users mailing list
chirp_users at intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to K0LNY at glenn at ervin.email
To unsubscribe, send an email to 
chirp_users-unsubscribe at intrepid.danplanet.com
To report this email as off-topic, please email 
chirp_users-owner at intrepid.danplanet.com
Searchable archive: 
https://www.mail-archive.com/chirp_users@intrepid.danplanet.com