[chirp_users] New chirp-next build
Matt Foster
Wed Jan 4 06:49:31 PST 2023
Testing here on a Fedora 37 VM with a Yaesu FT-60R. So far, so good.
To get it up and running, I had to do the following.
Downloaded source package and unpacked
Ran 'sudo python setup.py install' in the chirp directory.
Ran 'sudo dnf install python3-wxpython4'
I have run the application and downloaded from the radio successfully.
73, N0EYE, Matt
On Wed, Jan 4, 2023 at 1:51 AM W Paul Mills <ac0hy at wpmills.com> wrote:
> When I installed chirp-next, it showed up as 'chirp' not 'chirpw' and was
> located at '/usr/local/bin/chirp'
>
> On 1/4/23 00:18, K0LNY_Glenn wrote:
>
>
> When I run that command, I get errors, no Chirp.
> Glenn
> ----- Original Message -----
> *From:* Guy Schlosser <guyster at bex.net>
> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com> ; David
> Boucha <boucha at gmail.com>
> *Sent:* Tuesday, January 03, 2023 10:01 PM
> *Subject:* Re: [chirp_users] New chirp-next build
>
> Even though I didn't get chirp running from the command line, I was able
> to run it with python3 chirpwx.py while in the source folder. Here's what I
> found:
>
> Orca is reading menus, and will allow you to open and save files
>
> After opening a known good radio image, Orca announced to me that the
> memories page had focus, but I was still unable to arrow around and read
> the various memory values. I was able to export the image to a .csv file,
> so a good image it definitely was.
>
>
> That's all I have from the short tinkering I did. Good luck team in 2023.
>
> Thanks,
>
> Guy
> On 1/3/23 14:31, David Boucha wrote:
>
> Hi Glenn,
>
> These are the steps I took to install Chirp manually on Ubuntu 22.04
>
> Steps to install Chirp manually on Linux.
>
>
>
> 1. Make sure you have at least Python 3.7 installed.
>
> A. Type "python" in a command line terminal.
>
> B. Some Linux distros require using "python3". If your distro
> requires this, please type "python3" anywhere in this document that you see
> "python"
> 2. run "pip --version" to see what python version pip is. You may need to
> run "pip3" if your distro requires you also use "python3".
>
>
> 3. Open a browser and navigate to https://github.com/kk7ds/chirp
>
> 4. Click on the green "<> Code" button dropdown.
>
> 5. Click on "Download Zip" and save the zip file to your preferred
> location.
> 6. My file saved as "chirp-master.zip"
>
> 7. Unzip the zip file with the following command:
>
> A. "unzip chirp-master.zip"
>
> 8. Change into the resulting chirp-master directory:
>
> A. "cd chirp-master"
>
> 9. Pip install Chirp's dependencies:
>
> A. "pip install -r requirements.txt
>
> 10. Install Chirp:
>
> A. "python setup.py install"
>
> 11. Now you can start chirp by running "chirp" from the command line.
>
>
>
>
>
> Note: On ubuntu 22.04 you might have to install "python3-wxgtk4.0" before
> the pip install step.
>
>
> Let me know if this helps. Orca was able to read me the menu items while I
> moved around chirp with my arrow keys.
>
> On Tue, Jan 3, 2023 at 11:13 AM K0LNY_Glenn <glenn at ervin.email>
> <glenn at ervin.email> wrote:
>
>> Hi David,
>> Actually, a string of stuff that can be written into a bash script would
>> be great, with the preclusion that the user install git first.
>> So yes, it would be appreciated.
>> Glenn
>> ----- Original Message -----
>> *From:* David Boucha <boucha at gmail.com>
>> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>> *Sent:* Tuesday, January 03, 2023 11:04 AM
>> *Subject:* Re: [chirp_users] New chirp-next build
>>
>> Hey Glenn,
>>
>> I just tested running chirp directly from the git repository by
>> installing the dependencies with "pip3 install -r requirements", then
>> running "chirpwx.py" and orca was able to read everything to me. I'm not an
>> expert on orca. I think the navigation worked, but it did seem to work fine.
>>
>> Let me know if you'd like help running from the git repository.
>>
>>
>> Best,
>>
>> Dave
>>
>> On Tue, Jan 3, 2023 at 8:55 AM K0LNY_Glenn <glenn at ervin.email>
>> <glenn at ervin.email> wrote:
>>
>>> Well for accessibility, that is for the visually impaired to use Chirp,
>>> they will need a Linux using Python 2X, and an old Chirp that will install
>>> into it.
>>> Personally, I've not ever gotten a package of Chirp to be able to
>>> install right from downloading a Linux package, I rely on using apt to get
>>> Chirp from a repository.
>>> I had to follow step by step instruction to get Chirp to install into a
>>> newer Linux with Python 3, and I found after all that that flatpak breaks
>>> accessibility.
>>> So rather than putting someone through all that, I'm sure there are
>>> folks who would gladly download a big file that they can rite to a drive
>>> and boot it up and have Chirp working.
>>> Glenn
>>> ----- Original Message -----
>>> *From:* Ken Hansen <ken at n2vip.org>
>>> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>> *Sent:* Tuesday, January 03, 2023 9:00 AM
>>> *Subject:* Re: [chirp_users] New chirp-next build
>>>
>>> Shipping a complete Ubuntu installation in a VM just to have CHIRP
>>> pre-installed seems a bit of over-kill. Typically a single line command
>>> would install CHIRP, wouldn't it?
>>>
>>> CHIRP is 20-40 megabytes, a full GUI install of Ubuntu is measured in
>>> gigabytes.
>>>
>>> Ken, N2VIP
>>>
>>> On Jan 3, 2023, at 06:23, Scott Lopez <scottjl at gmail.com> wrote:
>>>
>>>
>>> Be aware of Ubuntu's IPRights Policy, particularity concerning
>>> redistribution:
>>>
>>> https://ubuntu.com/legal/intellectual-property-policy
>>>
>>> Yes, installing a 3rd party package (Chirp) and distributing a VM image
>>> of it can be considered 'modification'.
>>>
>>> On Mon, Jan 2, 2023 at 8:33 PM K0LNY_Glenn <glenn at ervin.email>
>>> <glenn at ervin.email> wrote:
>>>
>>>> Well if it is the only someone can use Chirp, either for accessibility,
>>>> or because of operating system, I see nothing wrong with it.
>>>> I may DD my thumb drive with Ubuntu and Chirp on it, if I can find a
>>>> drive with just that on it, and give a link to anyone who wants it.
>>>> Some of my thumb drives are multiboot, with several operating systems
>>>> on it, so I'll need to go through a bunch of them to find one that has
>>>> Ubuntu 18 and Chirp.
>>>>
>>>> Glenn
>>>>
>>>> ----- Original Message -----
>>>> *From:* Scott Lopez <scottjl at gmail.com>
>>>> *To:* Discussion of CHIRP <chirp_users at intrepid.danplanet.com>
>>>> *Sent:* Monday, January 02, 2023 7:22 PM
>>>> *Subject:* Re: [chirp_users] New chirp-next build
>>>>
>>>> I can't imagine anyone here wants to be responsible for setting up,
>>>> distributing, and supporting a VM image of what is now outdated and no
>>>> longer supported software. I know I wouldn't want to be. There's a reason
>>>> the software is outdated, the best solution is to keep up.
>>>>
>>>> On Mon, Jan 2, 2023 at 4:03 PM K0LNY_Glenn <glenn at ervin.email> wrote:
>>>>
>>>>> What would be handy is to have a VM of Ubuntu with the old Chirp
>>>>> already installed, so that can be implemented.
>>>>> I am sure I have an old Ubuntu Live on a thumb drive with Chirp on it,
>>>>> but I don't know if that can be made into a VM.
>>>>> Glenn
>>>>>
>>>> ------------------------------
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to K0LNY at glenn at ervin.email
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> To report this email as off-topic, please email
>>>> chirp_users-owner at intrepid.danplanet.com
>>>> Searchable archive:
>>>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>>>> _______________________________________________
>>>> chirp_users mailing list
>>>> chirp_users at intrepid.danplanet.com
>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>>> This message was sent to scottjl at gmail.com at scottjl at gmail.com
>>>> To unsubscribe, send an email to
>>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>>> To report this email as off-topic, please email
>>>> chirp_users-owner at intrepid.danplanet.com
>>>> Searchable archive:
>>>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>>>
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to Ken Hansen at ken at n2vip.org
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> To report this email as off-topic, please email
>>> chirp_users-owner at intrepid.danplanet.com
>>> Searchable archive:
>>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>>>
>>> ------------------------------
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to K0LNY at glenn at ervin.email
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> To report this email as off-topic, please email
>>> chirp_users-owner at intrepid.danplanet.com
>>> Searchable archive:
>>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>>> _______________________________________________
>>> chirp_users mailing list
>>> chirp_users at intrepid.danplanet.com
>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>>> This message was sent to UtahDave at boucha at gmail.com
>>> To unsubscribe, send an email to
>>> chirp_users-unsubscribe at intrepid.danplanet.com
>>> To report this email as off-topic, please email
>>> chirp_users-owner at intrepid.danplanet.com
>>> Searchable archive:
>>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>>
>> ------------------------------
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to K0LNY at glenn at ervin.email
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> To report this email as off-topic, please email
>> chirp_users-owner at intrepid.danplanet.com
>> Searchable archive:
>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>> _______________________________________________
>> chirp_users mailing list
>> chirp_users at intrepid.danplanet.com
>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
>> This message was sent to UtahDave at boucha at gmail.com
>> To unsubscribe, send an email to
>> chirp_users-unsubscribe at intrepid.danplanet.com
>> To report this email as off-topic, please email
>> chirp_users-owner at intrepid.danplanet.com
>> Searchable archive:
>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Guy Schlosser at guyster at bex.net
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
> ------------------------------
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to K0LNY at glenn at ervin.email
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
> _______________________________________________
> chirp_users mailing listchirp_users at intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Paul AC0HY at ac0hy at wpmills.com
> To unsubscribe, send an email to chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email chirp_users-owner at intrepid.danplanet.com
> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
>
>
> --
> /**************************************************
> * Amateur Radio Station AC0HY *
> * W. Paul Mills SN807 *
> * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS *
> * President Kaw Valley Amateur Radio Club *
> **************************************************/
>
> _______________________________________________
> chirp_users mailing list
> chirp_users at intrepid.danplanet.com
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Matt Foster at wedgef5 at gmail.com
> To unsubscribe, send an email to
> chirp_users-unsubscribe at intrepid.danplanet.com
> To report this email as off-topic, please email
> chirp_users-owner at intrepid.danplanet.com
> Searchable archive:
> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20230104/3b459596/attachment.html
More information about the chirp_users
mailing list